• 한국지반공학회논문집
• /
• 제24권2호
• /
• pp.5-14
• /
• 2008

국내 석산에서 생산되는 골재를 사용하여 대형삼축시험과 대형직접전단시험을 동시에 수행한 후 전단특성을 비교하였다. 비교를 위하여 시험조건을 가능한 일치시켰으며, 상대밀도를 50%, 70%, 90%의 세 가지로 변화시켜 시험을 수행하였다. 시험결과 응력-변형률 거동은 두 가지 시험에서 동일하게 나타나며, 전단강도는 상대밀도의 크기에 따라 시험방법별로 추세가 달라진다. 즉, 낮은 상대밀도에서는 대형직접전단시험의 내부마찰각이 대형삼축압축시험 결과 값에 비하여 작게 나타나고, 높은 상대밀도에서는 이 현상이 역전됨을 확인하였다.

• 한국지반공학회논문집
• /
• 제23권10호
• /
• pp.23-31
• /
• 2007

상대밀도는 사질토의 역학적 특성을 나타내는 중요한 요소 중의 하나이지만 아직까지도 최대 및 최소 상대밀도를 결정하는 방법이 명확하게 규정되지 않았다. 최대 및 최소상대밀도를 결정하는 방법은 많은 학자들에 의해 연구되었으나, 기존의 방법들은 시간과 노력이 많이 소요될 뿐만 아니라, 특히 최대상대밀도는 실험방법에 따라서 상당한 차이를 보여주고 있다. 이 연구에서는 기존 방법으로 구한 최대상대밀도와 큰 오차를 보이지 않으면서도 간편하고 실질적으로 이용하기 편리한 간편법을 제안하고자 한다. 실험은 타격수와 층수를 달리해 가면서 작은 몰드를 사용하여 실시하였으며, 실험결과를 Bowles 방법과 비교하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.422-426
• /
• 2003

Model soil tank tests were conducted in sandy soil to investigate the effect of surcharge strip loads on vertical stress distribution in soil. A total number of 6 tests were performed using one loading plate and two relative density(55%, 65%). The soil was considered as an elastic material, while no friction was allowed between the wall and the soil. Measured stress values were compared to predictions defined by Frohlich, Boussinesq and Westergaard. The comparison of measured values and predictions used the ratio between the soil pressure and load value. Results of this study demonstrated that experimental values were generally larger than predictions. The Frohlich analysis provided the best prediction, while the Boussinesq analysis and Westergaard theory not presented a satisfactional result.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 추계학술대회 논문집
• /
• pp.36-40
• /
• 1988

High TC Y-Ba-Cu-O Superconductors were fabricated by sintering, sinter+HIP encapsulation. Specimens were sintered at 920$^{\circ}C$∼960$^{\circ}C$. A part of sintered specimens were treated by HIP, and HIP conditions were 150 MPa, 880$^{\circ}C$, 30min under the Ar atmosphere. The relative density of HIP specimens was increased 5∼8% in comparison with sintered one(90∼93% relative density). X-ray analysis represented the orthorhobic-tetragonal phase transition with annealing condition. Tc measurements showed a sharp drp within 3$^{\circ}C$, 91K onset and 89K offset. Transport current density(Jc) of sintered specimens showed typically∼159A/㎤ but that of sinter+HIP encapsulation was decreased to∼89A/㎤ because of insufficient oxygen diffusion, Hardness(H) and Toughness(Kc) were increased to 38GPa; and 2.9 MPam$\^$$\frac{1}{2}$/, respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1290-1295
• /
• 2008

The relative density of soil indicate loose and dense state of sand. Because sand is low compressibility, initial relative density of sand is important effect factor of compression and shear behavior. To measure exactly relative density, the exactly maximum and minimum void ratio was determinated by laboratory tests. Generally, vibrating table method is adapted for minimum void ratio(KS F 2345). However KS F 2345 is not consider the particle break during the vibrating table test. In this study, The minimum void ratio is compared with a method of Pluviation and Vibrating table test results using the K-7(crushed sand). It is concluded that the K-7 sand particles were crushed during the vibrating table test and vibrating table test is not a suitable test for a crushed sand $e_{min}$.

• 한국산림과학회지
• /
• 제95권5호
• /
• pp.595-600
• /
• 2006

The plot design influences the budgets and the precision of forest inventory results. The objective of this study is to determine the efficiency of estimating forest variables such as tree density, basal area, volume, and species richness based on various plot sizes using fixed-area plot sampling in the natural deciduous forest of Pyeong-Chang County, Gang-won Province, Korea. In this study, 108 reference plots were established with a fixed plot size and shape of 0.09 ha ($30m{\times}30m$). In order to determine the optimal plot size for the interest of variables, each sample plot was established using different shapes (square, circle, and rectangle) and was divided into different plot sizes from 100 to $900m^2$. The mean relative difference (MRD) for the sum of the basal area and volume, and tree density per hectare decreased as plot size increased. But the MRD for three variables were only below 13% at the plot size of $500m^2$. Species richness for each reference stand observed ranging from 2 to 15 species, demonstrated highly positive significant relationships with plot size. The minimum plot size for the estimation of tree density, the sum of the BA and volume was determined to be about $400m^2$, whereas the estimation of species richness required a minimum plot size of $500m^2$.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.2042-2049
• /
• 2000

This paper is concerned with the comparison of forging characteristics between forward and backward processes, through the three-dimensional finite element simulation, for the aluminum powder forging of engine pistons. Starting from the theoretical formulation of velocity and temperature fields in the sintered preform during the process, we examine the comparative distributions of relative density, effective stress and temperature as well as the variations of total forging load and total volume reduction. Through the comparative results, we find out that the forward method provides better forging characteristics than the backward method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 춘계학술대회 논문집
• /
• pp.10-12
• /
• 1988

High Tc Y-Ba-Cu-O Superconductors were fabricated by sintering, sintering + HIP and Hot Pressing. Specimens were sintered at $940^{\circ}C$ and $960^{\circ}C$. In case that sintered specimens were treated by HIP, the relative density was increased 5-6% in comparison with sintered ones. X-ray analysis of each specimens represented orthorhombic phase and Tc measurements showed a sharp drop in the temperature range $95-88^{\circ}K$. The relative density of hot pressed samples was lower than 80%.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2001년도 가을 학술발표회 발표논문집
• /
• pp.188-190
• /
• 2001

We carried out to measure the variations of potential with current density polymers. The results were particularly examined to identify the influences on corrosion potential and corrosion rate of various factors including temperature and pH. The Tafel slope for anodic dissolution was determined by the polarization effect depending on these conditions. The optimum conditions were established for each case. The second anodic current density peak and maximum passive current density were designated as the relative corrosion sensitivity($I_{r}I_{f}$). The mass transfer coefficient value (${\alpha}$) was determined with the Tafel slope for anodic dissolution based on the polarization effect with optimum conditions.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제23권3호
• /
• pp.205-221
• /
• 2016

We formulate the additive entropy of a natural number in terms of the additive partition function, and show that its multiplicative entropy is directly related to the multiplicative partition function. We give a practical formula for the multiplicative entropy of natural numbers with two prime factors. We use this formula to analyze the comparative density of additive and multiplicative entropy, prove that this density converges to zero as the number tends to infinity, and empirically observe this asymptotic behavior.