• Journal of the Korean Geotechnical Society
• /
• v.24 no.2
• /
• pp.5-14
• /
• 2008

Shear characteristics of quarry blasted rocks were compared using large scale direct shear tests and triaxial tests. For comparison purpose, similar test conditions were simulated as much as possible and three types of relative density (50%, 70%, 90%) were employed for the test. Results indicate that stress-strain behavior shows the same trend for two tests, but the measured shear strengths differ for the different test ms and depends on the relative density. At low relative density, the internal friction angles from direct shear test are smaller than those from triaxial tests. However, at high relative density, this phenomenon is reversed.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.10
• /
• pp.23-31
• /
• 2007

Although the relative density is an important factor showing mechanical properties of granular soils, the methods for its estimation have not been satisfactorily standardized. Many researchers have proposed various methods to determine max, and min, dry density, but the results, especially for max, dry density, show significant differences. In this study, a simple and practical method of evaluating the max, relative density was proposed, which could give reliable results in comparison with conventional methods. The experiment was carried out by varying the number of blows and the layers of the sample for each mold and the results were compared with those of Bowles method.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.422-426
• /
• 2003

Model soil tank tests were conducted in sandy soil to investigate the effect of surcharge strip loads on vertical stress distribution in soil. A total number of 6 tests were performed using one loading plate and two relative density(55%, 65%). The soil was considered as an elastic material, while no friction was allowed between the wall and the soil. Measured stress values were compared to predictions defined by Frohlich, Boussinesq and Westergaard. The comparison of measured values and predictions used the ratio between the soil pressure and load value. Results of this study demonstrated that experimental values were generally larger than predictions. The Frohlich analysis provided the best prediction, while the Boussinesq analysis and Westergaard theory not presented a satisfactional result.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.10a
• /
• pp.36-40
• /
• 1988

High TC Y-Ba-Cu-O Superconductors were fabricated by sintering, sinter+HIP encapsulation. Specimens were sintered at 920$^{\circ}C$∼960$^{\circ}C$. A part of sintered specimens were treated by HIP, and HIP conditions were 150 MPa, 880$^{\circ}C$, 30min under the Ar atmosphere. The relative density of HIP specimens was increased 5∼8% in comparison with sintered one(90∼93% relative density). X-ray analysis represented the orthorhobic-tetragonal phase transition with annealing condition. Tc measurements showed a sharp drp within 3$^{\circ}C$, 91K onset and 89K offset. Transport current density(Jc) of sintered specimens showed typically∼159A/㎤ but that of sinter+HIP encapsulation was decreased to∼89A/㎤ because of insufficient oxygen diffusion, Hardness(H) and Toughness(Kc) were increased to 38GPa; and 2.9 MPam$\^$$\frac{1}{2}$/, respectively.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1290-1295
• /
• 2008

The relative density of soil indicate loose and dense state of sand. Because sand is low compressibility, initial relative density of sand is important effect factor of compression and shear behavior. To measure exactly relative density, the exactly maximum and minimum void ratio was determinated by laboratory tests. Generally, vibrating table method is adapted for minimum void ratio(KS F 2345). However KS F 2345 is not consider the particle break during the vibrating table test. In this study, The minimum void ratio is compared with a method of Pluviation and Vibrating table test results using the K-7(crushed sand). It is concluded that the K-7 sand particles were crushed during the vibrating table test and vibrating table test is not a suitable test for a crushed sand $e_{min}$.

• Journal of Korean Society of Forest Science
• /
• v.95 no.5
• /
• pp.595-600
• /
• 2006

The plot design influences the budgets and the precision of forest inventory results. The objective of this study is to determine the efficiency of estimating forest variables such as tree density, basal area, volume, and species richness based on various plot sizes using fixed-area plot sampling in the natural deciduous forest of Pyeong-Chang County, Gang-won Province, Korea. In this study, 108 reference plots were established with a fixed plot size and shape of 0.09 ha ($30m{\times}30m$). In order to determine the optimal plot size for the interest of variables, each sample plot was established using different shapes (square, circle, and rectangle) and was divided into different plot sizes from 100 to $900m^2$. The mean relative difference (MRD) for the sum of the basal area and volume, and tree density per hectare decreased as plot size increased. But the MRD for three variables were only below 13% at the plot size of $500m^2$. Species richness for each reference stand observed ranging from 2 to 15 species, demonstrated highly positive significant relationships with plot size. The minimum plot size for the estimation of tree density, the sum of the BA and volume was determined to be about $400m^2$, whereas the estimation of species richness required a minimum plot size of $500m^2$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.8 s.179
• /
• pp.2042-2049
• /
• 2000

This paper is concerned with the comparison of forging characteristics between forward and backward processes, through the three-dimensional finite element simulation, for the aluminum powder forging of engine pistons. Starting from the theoretical formulation of velocity and temperature fields in the sintered preform during the process, we examine the comparative distributions of relative density, effective stress and temperature as well as the variations of total forging load and total volume reduction. Through the comparative results, we find out that the forward method provides better forging characteristics than the backward method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.05a
• /
• pp.10-12
• /
• 1988

High Tc Y-Ba-Cu-O Superconductors were fabricated by sintering, sintering + HIP and Hot Pressing. Specimens were sintered at $940^{\circ}C$ and $960^{\circ}C$. In case that sintered specimens were treated by HIP, the relative density was increased 5-6% in comparison with sintered ones. X-ray analysis of each specimens represented orthorhombic phase and Tc measurements showed a sharp drop in the temperature range $95-88^{\circ}K$. The relative density of hot pressed samples was lower than 80%.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2001.11a
• /
• pp.188-190
• /
• 2001

We carried out to measure the variations of potential with current density polymers. The results were particularly examined to identify the influences on corrosion potential and corrosion rate of various factors including temperature and pH. The Tafel slope for anodic dissolution was determined by the polarization effect depending on these conditions. The optimum conditions were established for each case. The second anodic current density peak and maximum passive current density were designated as the relative corrosion sensitivity($I_{r}I_{f}$). The mass transfer coefficient value (${\alpha}$) was determined with the Tafel slope for anodic dissolution based on the polarization effect with optimum conditions.

• The Pure and Applied Mathematics
• /
• v.23 no.3
• /
• pp.205-221
• /
• 2016

We formulate the additive entropy of a natural number in terms of the additive partition function, and show that its multiplicative entropy is directly related to the multiplicative partition function. We give a practical formula for the multiplicative entropy of natural numbers with two prime factors. We use this formula to analyze the comparative density of additive and multiplicative entropy, prove that this density converges to zero as the number tends to infinity, and empirically observe this asymptotic behavior.