• Bulletin of the Korean Chemical Society
• /
• v.28 no.10
• /
• pp.1746-1750
• /
• 2007

The second-order scattering (SOS) phenomenon of the interaction of Pd nanoparticles with protein was reported and a simple, sensitive, palladium nanoparticle-based assay for trace amount of protein with SOS technique was developed. The SOS intensities were significantly enhanced due to the interaction of Pd nanoparticles with bovine serum albumin (BSA) or human serum albumin (HSA) at pH 3.5 or 4.0, respectively. The maximum SOS peak appeared at 260/520 nm (λex/λem). The optimal experiment conditions, affecting factors and the influence of some coexisting substances were checked. The SOS intensity increased proportionally with the increase of Pd concentration below 3.0 × 10?5 mol·L?1, while declined gradually above 4.0 × 10?5 mol·L?1. BSA within the range of 0.01-2.6 μg·mL?1 and HSA of 0.01-1.7 μg·mL?1 can be detected with this method and the detection limits were 2.3 and 11.2 ng·mL?1, respectively. The method was successfully applied to the quantitative detection of total protein content in human serum samples with the maximum relative standard deviation (RSD) lower than 2.6% and the recoveries over the range of 99.5-100.5%.

• Journal of Bio-Environment Control
• /
• v.11 no.2
• /
• pp.88-92
• /
• 2002

The study was conducted to estimate stimulation of plant growth of blue and red leaf lettuce (Lactuca sativa L.) as affected by covering methods with vinyl materials containing concentrated PO film. Plants were grown in direct, direct and tunnel, and tunnel covering with 'Pasraido materials' from October 13 to 31. With the covering mean air temperature, soil temperature, leaf temperature and relative humidity remarkedly increased. Higher temperature was observed in the order of direct and tunnel, direct, tunnel covering and the control. Photosynthetic photon flux (PPF, $\mu$mol m$^{-2}$ . s$^{-1}$ ) was observed in reverse order of temperature. Concentration of $CO_2$ was higher during night than during day under the light. Accumulation of highest $CO_2$ at night was obtained from direct coverings followed by direct and tunnel, tunnel covering and the control. Plant height, leaf number and leaf area of blue and red lettuces were stimulated by direct covering. However, there was no significant difference.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.418-422
• /
• 2000

The tensile properties and color of fish meal film under various processing conditions were measured to obtain basic data for biodegradable Alaska Pollack meal protein isolate (APMPI) film. The tensile strength and the elongation of APMPI film were increased with casting volume of APMPI solution but those of APMPI film were weakened with the addition of glycerol amount as well as reduction of pH values. In case of adding various plasticizer, the tensile strength of film was increased in order as follows: sorbitol, polyethylene glycol and glycerol. The elongation was increased in order of polyethylene glycol, sorbitol and glycerol. The tensile strength of film increased with increment of APMPI concentration, but the elongation of film was not affected by APMPI concentration. The tensile strength of APMPI film was decreased with the increment of relative humidity but its elongation was increased with the increment of relative humidity, Not only lightness and yellowness of film added with sorbitol but also redness and total different color of film added with polyethylene glycol showed the highest value in Hunter color system.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1976-1980
• /
• 2010

A simple and reliable method has been developed to selectively separate and concentrate trace amounts of Fe(III) ions from water and food samples by using flame atomic absorption spectrometry. A new reagent, 5-hydroxy-4-ethyl-5,6-di-pyridin-2-yl-4,5-dihydro-2H-[1,2,4] triazine-3-thione, was synthesized and characterized by using FT-IR spectroscopy and elemental analysis. Effects of pH, concentration and volume of elution solution, sample flow rate, sample volume and interfering ions on the recovery of Fe(III) were investigated. The optimum pH was found to be 5. Eluent for quantitative elution was 10 mL of 2 M HCl. The preconcentration factor of the method, detection limit (3s/b, ${\mu}gL^{-1}$) and relative standard deviation values were found to be 25, 4.59 and 1%, respectively. In order to verify the accuracy of the method, two certified reference materials (TMDA 54.4 lake water and SRM 1568a rice flour) were analyzed. The results obtained were in good agreement with the certified values. The method was successfully applied to the determination of Fe(III) ions in water and food samples.

• Journal of Korean Society of Rural Planning
• /
• v.16 no.3
• /
• pp.27-41
• /
• 2010

This study developed a settlement environment diagnostic indices (SEDI) of rural villages which can apply to analyze variable conditions of villages having development projects. The index consists of 5 diagnostic areas (first level) with 13 items (second level), including detail indices of 40 criteria (third level) defined by specialists' brainstorming process. In order to develop the index system, object-oriented approach was used to extract the 5 diagnostic areas (infra-basic settlement facility, life condition & environmental resources, industry & economic infrastructure, community, and residents) from rural villages. For the 40 criteria, it was introduced a quantification method that all villages have absolute values in national level, not relative value between villages within an unit area. The diagnostic diagram and table were developed to evaluate the villages compositively. The developed SEDI was applied to study areas, 56 villages in 2 subdivision areas of county, located on county of Keumsan. Applicability of the index system, database system should be developed with the surveying method of data in village level.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.6 no.2
• /
• pp.197-202
• /
• 2003

The hot climatic conditions prevailing particularly in summer are not conducive to rear these high yielding bivoltine hybrids throughout the year, In order to select efficiently the breeds with high temperature tolerance, it is very important to analyze critically the impact of high temperature on many silk yielding attributes of silkworm races. Keeping the above in view, the present study was undertaken to determine the effect of high temperature $(36 {\pm} 1^{\circ}C)$ and high humidity $(80 {\pm} 5% Relative Humidity)$ on the rearing performance of pure races, foundation crosses, single hybrids and double hybrids of bivoltine silkworm, Bombyx mori L. The robust bivoltine breeds, CSR18, CSR19, 8HT and 5HT, eight foundation crosses, eight single hybrids and eight double hybrids involving these breeds were chosen as materials in this study.

• ALGAE
• /
• v.20 no.4
• /
• pp.345-352
• /
• 2005

In order to investigate the distribution of phytoplankton community in the coastal waters of the Chuksan Harbor, East Sea, the abundance and biomass of phytoplankton have been evaluated through seasonal interval sampling from April 2000 to October 2002. A total of 363 different phytoplankton species was observed and most of them were composed of diatoms. The mean abundance and chlorophyll-a concentration of phytoplankton during the study period ranged from 56 ${\times}$ $10^3$ to 720 ${\times}$ $10^3$ cells $L^{-1}$ and from 0.78 to 3.29 μg chl-a $L^{-1}$, respectively. The relative contribution of the size-fractionated phytoplankton to phytoplankton community showed difference according to seasons. The average contribution of nano-phytoplankton(<20 $\mu$m) was over 50% in the total abundance and biomass of the phytoplankton. Our results show that nano-phytoplankton play an important role in the southern coastal waters of the East Sea. And the environmental factors such as suspended substances, phosphates and silicates were positively correlated with the abundances and biomass of phytoplankton.

• Advances in environmental research
• /
• v.1 no.4
• /
• pp.289-304
• /
• 2012

Tris (2-methyl-1-aziridinyl) phosphine oxide (MAPO) is extremely poisonous and persistent in aqueous media. An efficient UV/nano$TiO_2$ process was employed for its mineralization in a high duty falling film photo-reactor based on an experimental design scheme that considers interactions between the main variables. The influencing variables and their range were determined with preliminary studies. The results show substrate mineralization to some extent under mild conditions of: T = $30^{\circ}C$, pH = 8.5, $[MAPO]_0=60\;mg\;L^{-1}$ and $[TiO_2]=110\;mg\;L^{-1}$. The relative importance of the influencing parameters were initial pH > temperature > $[MAPO]_0$ > [$TiO_2$]; while the interdependence of all the parameters was significant. Accordingly, a reduced quadratic expression was developed. Meanwhile, mineralization kinetic studies, based on chemical oxygen demand, revealed a power law model with order of 2.6 during process time until 150 min.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.3
• /
• pp.353-359
• /
• 2004

In this study. porcelain insulator samples which have a different alumina composition were manufactured in order to test electrical and mechanical properties and make an analysis of the propagation phenomena of micro cracks on porcelain body. From XRD quantitative analysis the crystalline phases were different with alumina composition, sample C and D which have about l7wt％ Corundum phase without the Cristobalite phase shows better electrical and mechanical properties than sample A and B which have the Cristobalite phase. In dielectrics test on porcelain samples with below l7wt％ alumina composition, it was found that the amount of glass phase(SiO$_2$) have an main effect to decrease the dielectric loss(tan$\delta$), and the dielectric breakdown voltage of aluminous porcelain insulators was largely affected by its relative density. As a micro tracks analysis, HRB were measured, then the intensity of HRB increased with the amount of alumina composition. On the other hand, the propagation behaviors of cracks was fairly influenced by the distribution of pores.

• Journal of Biosystems Engineering
• /
• v.37 no.5
• /
• pp.327-334
• /
• 2012

Purpose: The color changes in red pepper during far infrared drying were studied in order to establish a color change model. Methods: The far infrared drying experiments of red pepper were conducted at two temperature levels of 60, $70^{\circ}C$ and two air velocity levels of 0.6 and 0.8 m/s. The results were compared with the hot-air drying method. The surface color changes parameters of red pepper were measured qualitatively based on L (lightness), a (redness), b (yellowness) and total color changes (${\Delta}E$). The goodness of fit of model was estimated using the coefficient of determination ($R^2$), the root mean square error (RMSE), the mean relative percent error (P) and the reduced chi-square (${\chi}^2$). Results: The results show that an increase in drying temperature and air velocity resulted in a decrease in drying time, the values of L (lightness) and a (redness) decreased with drying time during far infrared drying. The developed model showed higher $R^2$ values and lower RMSE, P and ${\chi}^2$ values. Conclusions: The model in this study could be beneficial to describe the color changes of red pepper by far infrared drying.