• 제목/요약/키워드: reject

검색결과 601건 처리시간 0.025초

회전기계 고장 진단을 위한 최근접 이웃 분류기의 기각 전략 (Rejection Study of Mearest Meighbor Classifier for Diagnosis of Rotating Machine Fault)

  • 최영일;박광호;기창두
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2000년도 추계학술대회 논문집
    • /
    • pp.81-84
    • /
    • 2000
  • Rotating machine is used extensively and plays important roles in the industrial field. Therefore when rotating machine get out of order, it is necessary to know reasons then deal with the troubles immediately. So many studies far diagnosis of rotating machine are being done. However by this time most of study has an interest in gaining a high recognition But without considering error $rate^{(1)(2)(3)}$ , it is not desirable enough to apply h the actual application system. If the manager of system receives the result misjudging the condition of rotating machine and takes measures, we would lose heavily. So in order to play the creditable diagnosis, we must consider error rate. T h ~ t is. it must be able to reject the result of misjudgment. This study uses nearest neighbor classifier for diagnosis of rotating $machine^{(4)(8)}$ And the Smith's rejection $method^{(1)}$ used to recognize handwritten charter is done. Consequently creditable diagnosis of rotating machine is proposed.

  • PDF

터빈 발전기의 부분방전 신호 중 노이즈 제거 방법 (A method to reject noise signals in partial discharge signals of turbine generator)

  • 박영훈;박부견;김성현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.240-242
    • /
    • 2005
  • It is well known that the PD (Partial Discharge) signals are generated if insulators have some defects such as voids in electrical facility and various PD detection methods are developed for preventing electrical troubles. So, an interest for the PD signals is higher and higher according to the high concern for the defects detection method of the aging electrical facility. When the equipment to detect PD signals installed at site and it works, a lot of noises flow in the equipment from surrounding situation and it will be mixed with original PD waveform. So we can not get the desired PD waveform. Therefore, there are many trial to reject or suppress the noise from the PD signals from long times ago. The greater of them used the hardware such as bridge circuits and frequency filters to suppress the noise. This paper proposed a novel noise rejection method in acquired data from PD detection equipment. The noise has the irregular phase and higher signal level than real PD, and noise decision is performed after inspection of pulse distribution in ${\Phi}$-q-n graph of acquired data from PD detection equipments. By experimental results on high voltage electric equipments, it is shown that proposed method has good performance. It is expected that this noise rejection technology is useful in numeric calculation and trend management of PD level.

  • PDF

음이온하전막을 이용한 NAD 재생형 bioreactor에 의한 fructose로부터 sorbitol의 생산 (Production of Sorbitol from Fructose in Charged Membrane Bioreactor With NAD-Regeneration System)

  • 박선영;윤세억
    • KSBB Journal
    • /
    • 제7권3호
    • /
    • pp.179-185
    • /
    • 1992
  • NAD재생형 bioreactor를 구축함에 있어 음이온 하전막을 이용하고자 하였다. 사용한 막은 용액상의 NAD의 통과를 저지하여 80.9%를 bioreactor내에 존속시켰는데 NAD의 bioreactor내에의 존속율은 Tris-maleate완충용액을 사용하고 albumin을 첨가하므로써 증가되었다. 음이온하전막을 장착한 bioreactor내에서 주반응 효소로서 sorbitol dehydrogenase와 재생반응효소로서 alcohol dehydrogenase를 사용하여 NADH로의 재생과 함께 fructose로부터 sorbitol의 생산을 행하였다. 반응형식은 반복회분조작을 행하였는데 매 회분마다 70%의 전환율이 될 때까지 반응기킨 후 반응액의 90%를 회수한 후 fructose와 ethanol을 feed하여 다음의 회분반응을 행하였다. Sobitol의 생산량은 198시간의 반응에서 47g/L이었다. 한편 사용한 막의 NAD존속율은 반응종료후에도 거의 감소되지 않았다.

  • PDF

고지재생연구(제10보) -골판지 고지의 미세분 분급효율 개선을 위한 다단계 부산부유 처리 및 분급 촉진제 적용- (Recycling of Wastepaper(X) -Improvement of Fines Fractionation through Multi-Stage Froth-Flotation and Addition of Cationic Polyelectrolyte as a Fractionating Promoter for OCC Flotation-)

  • 여성국;류정용;신종호;송봉근
    • 펄프종이기술
    • /
    • 제32권4호
    • /
    • pp.27-33
    • /
    • 2000
  • A new technique for fractionating pulp stock into a long fiber portion and fines fraction was developed by KRICT in order to enhance the drainage and strength properties of recycled OCC pulp. In order to investigate the effect of fines contents in stock and stages of flotation on fractionation efficiency, flotations were performed at varied fines contents and flotation stages. Based on the result of multi-stage flotation fractionation it could be said that fines smaller than 15${\mu}{\textrm}{m}$ stabilize flotation froth of OCC. Although the amounts and the fines contents of flotation reject could be increased by multi-stage flotation fractionation of OCC, flotation stages more than 3 times were found to be inefficient in terms of fines concentrating degree. In order to satisfy the both conditions of reducing long fiber loss and of increasing flotation reject, several kinds of fractionating promoters were searched and investigated. And high molecular weight cationic polyacrylamide was chosen as a long fiber flocculating and flotation froth-stabilizing agent.

  • PDF

친환경 감열기록지 생산을 위한 순환제지자원의 탈묵 특성 연구 (Studies on Deinking Properties of Recovered Paper for Manufacturing Eco-friendly Thermal Recording Paper)

  • 이태주;최도침;김문성;류정용
    • 펄프종이기술
    • /
    • 제47권6호
    • /
    • pp.98-105
    • /
    • 2015
  • Demands of thermal recording paper have been increased significantly by increase in usage of invoice, fax, and label. Thermal recording paper was mainly made based on virgin fiber. It is necessary to find a suitable alternative to virgin fiber in terms of environment protectional resources conservation. In this paper, deinking properties of different recovered papers were analyzed in order to use the recovered paper as raw material of thermal recording paper. Recovered paper were ONP, OMG and white ledger. Flotation reject of OMG was high because inorganic pigments in coating layer could be removed by upstream of froth. Brightness of white ledger and OMG were much higher than that of ONP. Therefore, properties of pulp made from the recovered paper could be enhanced with increase in blending ratio of white ledger and OMG. However, blending ratio of OMG caused the increase of flotation reject. Consequently, the optimum blending ratio of ONP, OMG, and white ledger was 3:3:3 for eco-friendly thermal recording paper. Under the condition, brightness was about 70% and ERIC was below 300 ppm.

위사차가 없는 1차원 및 2차원 Maximally Flat FIR 필터의 새로운 설계 방법 (A New Design Method for One-Dimensional and Two-Dimensional Maximally Flat FIR Filters with Zero-Phase)

  • 박종연;장목순
    • 한국통신학회논문지
    • /
    • 제19권12호
    • /
    • pp.2458-2467
    • /
    • 1994
  • 본 논문에서는 임의로 주어진 설계 조건을 만족하는 MF(Maximally Flat) FTR 저역통과필터 및 고역통과필터의 임펄스응답으로부터 직접적인 연산에 의해서 대역통과필터 및 대역저지필터의 임펄스응답을 구하였다. 또한 위상차가 없는 2-차원의 MF FTR 저역통과필터, 고역통과필터, 대역통과필터 및 대역저지필터는 본 연구에서 구한 1-차원의 임펄스응답의 변환에 의해서 구하였으며, 이러한 필터들은 영상신호처리 과정에서 발생할 수 있는 선과 모서리의 파괴를 방지할 수 있다.

  • PDF

주파수 복수통신을 위한 협대역 간섭신호제거 (Narrow Band Interference Rejection for Spectrum Overlay Communications)

  • 김제우;김희동;조동호
    • 정보와 통신
    • /
    • 제13권11호
    • /
    • pp.181-191
    • /
    • 1996
  • 본 논문에서는 direct sequence spread spectrum(DS/SS) 통신 시스템과 협대역통신시스템이 동일 주파수 대역에서 공존하는 주파수복수통신시스템에 있어서의 협대역신호 제거에 대해 논한다. DS/SS 시스템과 협대역통신시스템의 주파수복수통신시스템에서 DS/SS신호의 스펙트럼 밀도는 낮기 때문에 협대역시스템의 통신에 큰 영향을 주지 않지만, 협대역신호의 DS/SS시스템에의 영향은 크기 때문에 원활한 복수통신을 위해서는 DS/SS 시스템에 미치는 협대역신호를 반드시 제거해야한다. DS/SS 방식에 있어서 협대역간섭신호 제거 기법은 크게 시간영역과 변환영역에서의 처리 기법으로 분류될 수 있다. 본 논문에서는 예측필터를 이용한 시간영역 처리 기법은 Fourier 변환을 이용한 변환영역 처리 기법, 그리고 소자의 특성을 이용한 협대역 간섭신호를 제거하는 방법에 대해 논의하고, 각 방법의 특성을 비교한다. 나아가, gyrator를 이용하여 ASIC화가 용이한 tunable notch 필터의 구조를 제안한다.

  • PDF

Robust Optimal Nonlinear Control with Observer for Position Tracking of Permanent Magnet Synchronous Motors

  • Ha, Dong-Hyun;Lim, Chang-Soon;Hyun, Dong-Seok
    • Journal of Power Electronics
    • /
    • 제13권6호
    • /
    • pp.975-984
    • /
    • 2013
  • This paper proposes a robust optimal nonlinear control with an observer to reject the offset errors of position tracking for surface mounted permanent magnet synchronous motors. We provide the control method to reject offset errors and load torque for designing field oriented control (FOC) based the alternating current (AC) frame. The proposed method consists of a torque generator, a commutation scheme, an electrical controller, and a load torque observer. The mechanical controller is designed to compensate for load torque and the offset error and generate the desired torque. The commutation scheme is proposed to create the desired currents for the desired torque. The electrical controller is developed to guarantee the desired currents. The observer is designed to estimate both the velocity and the load torque. In order to obtain the robustness to parameter uncertainties and a gain tuning guide, the linear quadratic regulator method is applied to the proposed method. The closed-loop stability is proven. A detailed process for the FOC design and an analysis of the control methods based on the AC frame are presented. The performance of the proposed method was validated via experiments. The proposed method obtains the FOC based on the AC frame. Furthermore, the position tracking performance of the proposed method is superior to that of the conventional method.

Study on the optimization of partial nitritation using air-lift granulation reactor for two stage partial nitritation/Anammox process

  • Jung, Minki;Oh, Taeseok;Jung, Kyungbong;Kim, Jaemin;Kim, Sungpyo
    • Membrane and Water Treatment
    • /
    • 제10권4호
    • /
    • pp.265-275
    • /
    • 2019
  • This study aimed to develop a compact partial nitritation step by forming granules with high Ammonia-Oxidizing Bacteria (AOB) fraction using the Air-lift Granulation Reactor (AGR) and to evaluate the feasibility of treating reject water with high ammonium content by combination with the Anammox process. The partial nitritation using AGR was achieved at high nitrogen loading rate ($2.25{\pm}0.05kg\;N\;m-3\;d^{-1}$). The important factors for successful partial nitritation at high nitrogen loading rate were relatively high pH (7.5~8), resulting in high free ammonia concentration ($1{\sim}10mg\;FA\;L^{-1}$) and highly enriched AOB granules accounting for 25% of the total bacteria population in the reactor. After the establishment of stable partial nitritation, an effluent $NO_2{^-}-N/NH_4{^+}-N$ ratio of $1.2{\pm}0.05$ was achieved, which was then fed into the Anammox reactor. A high nitrogen removal rate of $2.0k\; N\;m^{-3}\;d^{-1}$ was successfully achieved in the Anammox reactor. By controlling the nitrogen loading rate at the partial nitritation using AGR, the influent concentration ratio ($NO_2{^-}-N/NH_4{^+}-N=1.2{\pm}0.05$) required for the Anammox was controlled, thereby minimizing the inhibition effect of residual nitrite.

공공서비스 IT수용에 대한 사용자 저항요인 : 고속도로 하이패스시스템 사례 (Why Do Laggards Resist the IT Adoption in Public Service? : A Case of Expressway Hi-Pass System)

  • 조희수;서영호;이상철;이새봄
    • 품질경영학회지
    • /
    • 제47권2호
    • /
    • pp.367-380
    • /
    • 2019
  • Purpose: The purpose of this study is (1) to empirically examine why laggards resist IT adoption in public service and (2) to investigate the relationship between resistance and negative behavioral intention. Methods: The questionnaire survey was conducted on expressway users who do not use High-pass system. The collected 232 samples were analyzed using structure equation model method with AMOS 22.0. Results: Resistance is found to be a statistically significant factor affecting intention to reject. Also, incompatibility, privacy concern, status quo inertia and relative advantage are found to be statistically significant factors affecting resistance. Conclusion: Laggards have a tendency to intend to reject IT adoption rather than to postpone. They are affected not by monetary, procedural aspect associated with purchasing or registering OBU(On Board Unit). Incompatibility and relative advantage which are inherent attributes of Hi-pass system are more influential factors than privacy concern and status quo inertia. They make ethical and emotional decision partially affected by public-social factors.