• 한국구조물진단유지관리공학회 논문집
• /
• 제16권3호
• /
• pp.99-108
• /
• 2012

본 연구에서는 철근콘크리트 슬래브의 내부식성과 경량화를 도모하기 위하여 GFRP bar를 휨보강근으로 사용하는 경량골재콘크리트 슬래브를 고려하고 이 구조물에 대하여 기초적인 거동을 조사하였다. 경량콘크리트의 압축강도 및 인장강도 그리고 콘크리트 파괴에너지 측정, 일련의 슬래브 휨실험, 비선형유한요소해석을 통한 수치해석, 휨실험과 수치해석의 결과비교 등이 행하여졌다. 그 결과, GFRP bar를 휨보강근으로 사용한 경량콘크리트 슬래브는 기준시험체로 사용된 동일 규격의 철근콘크리트 슬래브에 비하여 무게를 28%정도 감소시킬 수 있었지만 파괴하중은 36%정도 감소되었다. 이는 GFRP bar의 낮은 축강성과 경량콘크리트의 낮은 부착강도 때문인 것으로 판단된다. 그리고 경량콘크리트의 부착력 감소 특성을 고려하기 위하여 GFRP bar와 콘크리트 경계면 사이에 계면요소를 사용한 수치해석 결과는 계면요소의 사용이 실험결과에 더 근접해갈 수 있는 방법임을 보여주었다.

• 한국공간구조학회논문집
• /
• 제17권4호
• /
• pp.43-50
• /
• 2017

A type of one-way concrete composite slabs made by strain hardening cementitious composites (SHCC) deck combined with high tensile reinforcements was developed and evaluated by four-point slab bending test. The SHCC material was considered to have an high-ductile and strain hardening behavior in tension after cracking. From experimental comparisons with conventional reinforced concrete slab, the proposed SHCC and high tensile reinforced concrete composite slab showed more improved responses both in service and ultimate load capacities as well as in control of crack width and deflection.

• Structural Engineering and Mechanics
• /
• 제86권3호
• /
• pp.417-430
• /
• 2023

As the key part in the reinforced concrete column-steel beam (RCS) frame, the beam-column joints are usually subjected the axial force, shear force and bending moment under seismic actions. With the aim to study the seismic behavior of RCS joints with and without RC slab, the quasi-static cyclic tests results, including hysteretic curves, slab crack development, failure mode, strain distributions, etc. were discussed in detail. It is shown that the composite action between steel beam and RC slab can significantly enhance the initial stiffness and loading capacity, but lead to a changing of the failure mode from beam flexural failure to the joint shear failure. Based on the analysis of shear failure mechanism, the calculation formula accounting for the influence of RC slab was proposed to estimate shear strength of RCS joint. In addition, the finite element model (FEM) was developed by ABAQUS and a series of parametric analysis model with RC slab was conducted to investigate the influence of the face plates thickness, slab reinforcement diameter, beam web strength and inner concrete strength on the shear strength of joints. Finally, the proposed formula in this paper is verified by the experiment and FEM parametric analysis results.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권4호
• /
• pp.57-66
• /
• 2015

본 연구는 경량콘크리트와 GFRP 보강근을 휨보강근으로 사용하여 제작되는 GFRP 보강근 경량콘크리트 슬래브를 교량 슬래브 등에 활용해보기 위한 사전 연구로서, 기존의 철근 콘크리트 슬래브와 GFRP 보강근 경량콘크리트 슬래브의 휨 거동 차이점 분석에 초점을 두었다. 이를 위하여 일련의 슬래브 실험체들을 제작하고 3점 휨 실험 및 수치해석을 행하였다. 실험 결과, GFRP 보강근 경량콘크리트 슬래브 실험체는 GFRP 보강근의 과다보강으로 인하여 실험체 하부에 발생된 초기균열이 하중 재하면의 콘크리트 압축부까지 연결되면서 전단파괴되는 경향을 보였다. 그리고 철근 콘크리트로 제작된 슬래브 실험체에 비하여 무게는 72%이었으며 휨 실험에서의 파괴하중은 58%인 것으로 나타났다. 한편, midas FEA를 이용하여 행한 수치해석 과정은 실험에서 나타난 전단파괴 하중까지 잘 모사하였다. 그러나 GFRP 보강근의 인장강도 대신 탄성계수가 입력값으로 요구됨에 따라 가력되는 하중과 처짐은 실험에서 나타난 전단파괴 이후에도 계속하여 증가하는 경향을 보였다.

• Computers and Concrete
• /
• 제12권1호
• /
• pp.37-51
• /
• 2013

The responses of reinforced concrete slabs subject to an impact loading near the ultimate load range are explored. The analysis is carried out on a simply supported rectangular reinforced concrete slab using a nonlinear explicit dynamic procedure and considering three material models: Drucker-Prager, modified Drucker-Prager, and concrete damaged plasticity, available in the commercial finite element software, ABAQUS/Explicit. For comparison purposes, the impact force-time response, steel reinforcement failure, and concrete perforation pattern are verified against the existing experimental results. Also, the effectiveness of mesh density and damage wave propagation are studied independently. It is shown that the presently adopted finite element procedure is able to simulate and predict fairly accurate the behavior of reinforced concrete slab under impact load. More detailed investigations are however demanded for the justification of effects coming from an imperfect projectile orientation as well as the load and structural surface conditions, including the impulsive contacted state, which are inevitable in an actual impact environment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.637-640
• /
• 2002

The deterioration of RC deck slabs has been a serious problem and high portion of budget has been a spent for repair and strengthening of deck slab. The concrete deck slabs are subject to direct application of vehicle loading and accumulation of fatigue damage. Besides, various environmental causes. In this paper, an probabilistic study is carried out to predict exact load effects and structural capacity of deck slab during its service life, and estimate an appropriate remaining life of deck slab. To achieve this purpose the live load model is developed using by influence line including deterioration of deck slab, and deterioration model of bridge deck slab is developed. In addition, the fatigue life of reinforced concrete deck slabs considering corrosion of reinforcement are estimated based on experimental formula. This study will help rational decisions for the management and repair of reinforced concrete deck slabs.

• 콘크리트학회논문집
• /
• 제19권2호
• /
• pp.209-216
• /
• 2007

본 연구는 강섬유 보강 초고강도 콘크리트가 적용된 슬래브-기둥 접합부의 구조적 특성을 파악하였다. 2개의 슬래브-기둥 시험체와 4개의 독립 기둥 시험체의 기둥 하중 전달 실험이 수행되었다. 기둥 하중 실험 수행시, 슬래브-기둥 접합부의 실제 구속 상태를 고려하기 위해 슬래브 하중을 적용하였다. 주 변수로는 강섬유 보강 초고강도 콘크리트의 확대 타설이며, 이에 더하여 슬래브의 접합부 구속 효과, 강섬유 보강, 그리고 접합부의 콘크리트 강도 등이 실험을 통해 파악되었다. 또한, ACI Code(2005)와 CSA Standard(2004)의 예측식과 실험 결과를 비교하였다. 슬래브-기둥 접합부를 통한 기둥 하중 전달에 대한 강섬유 보강 초고강도 콘크리트의 효과를 실험을 통해 확인하였다.

• Computers and Concrete
• /
• 제19권5호
• /
• pp.567-577
• /
• 2017

This study presents investigation of the behavior of moderately thick reinforced concrete slabs having hollow cores with different parameters. The experimental part of this investigation includes testing eight specimens of solid and hollow-core slab models having (2.05 m) length, (0.6 m) width and (25 cm) thickness under two monotonic line loads. Load versus deflection was recorded during test at mid span and under load. Numerically, the finite element method is used to study the behavior of these reinforced concrete slabs by using ANSYS computer program. The specimens of slab models are modeled by using (SOLID65) element to represent concrete slabs and (LINK180) element to represent the steel bars as discrete axial members between concrete nodes. The finite element analysis has showed good agreement with the experimental results with difference of (4.71%-8.68%) in ultimate loads. A parametric study have been carried out by using ANSYS program to investigate the effects of concrete compressive strength, size and shape of core, type of applied load and effect of removing top steel reinforcement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.142-145
• /
• 2006

A method of plane expansion of reinforced concrete apartments using precast concrete was developed. The method increased the stiffness of the precast slab using two ribs and allowed to cast concrete for multi stories. The proposed precast system is capable to construct concrete slabs without props. Ten reinforced concrete slabs were tested in order to investigate the stiffness increase of the developed precast slab with two rids. Comparison between the proposed precast slab and the slab without ribs indicated that the deflection of the precast slab was decreased by using rids.

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.737-750
• /
• 2022

Timber-Concrete Composite construction system consists of combining timber beam or deck and concrete with different connectors. Different fastener types are used in Timber-Concrete Composite systems. In this paper, the effects of two types of fasteners on structural behavior are compared. First, the notches were opened on timber beam, and combined with reinforced concrete slab by fasteners. This system is called as Notched Connection System. Then, timber beam and reinforced concrete slab were combined by new type designed fasteners in another model. This system is called as Notched-Slab Approach. Two laboratory models were constructed and bending tests were performed to examine the fasteners' effectiveness. Bending test results have shown that heavy damage to concrete slab occurs in Notched Connection System applications and the system becomes unusable. However, in Notched-Slab Approach applications, the damage concentrated on the fastener in the metal notch created in the slab, and no damage occurred in the concrete slab. In addition, non-destructive experimental measurements were conducted to determine the dynamic characteristics. To validate the experimental results, initial finite element models of both systems were constituted in ANSYS software using orthotropic material properties, and numerical dynamic characteristics were calculated. Finite element models of Timber-Concrete Composite systems are updated to minimize the differences by manual model updating procedure using some uncertain parameters such as material properties and boundary conditions.