• Preventive Nutrition and Food Science
• /
• v.12 no.1
• /
• pp.40-45
• /
• 2007

The effects of drying methods on the physicochemical properties of chaga (Inonotus obliquus) mushroom powder were investigated. Scanning electron micrograph revealed that freeze drying produced smaller particle- sized samples which in turn resulted in higher porosity than did vacuum and hot-air drying. Samples prepared by freeze drying showed a significantly higher L*-value as compared with those prepared by hot-air drying and vacuum drying (p<0.05). The lightness (L*-value) significantly decreased with increasing relative humidity and storage temperature regardless of drying method (p<0.05). The yellowness (b*-value) increased significantly with increasing relative humidity (p<0.05). Browning index was significantly lower in samples prepared by freeze drying (p<0.05) but not significantly different between samples dried by hot-air and vacuum drying. Freeze dried sample exhibited a significantly higher degree of rehydration than other samples (p<0.05) probably due to the small particle size. Water solubility of the freeze dried sample was higher than those of the other methods while swelling ratio of the same sample appeared to be lower than those of others. Freeze dried chaga mushroom powder contained significantly lower amount of total phenolics and total sugar as compared to other samples (p<0.05).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.10
• /
• pp.1742-1747
• /
• 2004

Effects of raw material composition, feed moisture and process temperature on chemical, physical and sensory properties of extrudates produced by a single-screw extruder from the mixtures of rice flour, isolated soy protein and file fish were evaluated through response surface methodology (RSM). Nitrogen solubility index (NSI), integrity index (II), rehydration ratio (RR), density, and the external appearance were measured as indices of physicochemical and sensory properties of extrudates. RR was negatively correlated with density (R=-0.742, p<0.0l). Increased amounts of rice flour in feed mixtures resulted in increased RR. The extrudate prepared from the mixtures of ISP, rice flour and file fish showed the highest sensory score at which extrusion temperature was 13$0^{\circ}C$ or above.

• Journal of Yeungnam Medical Science
• /
• v.13 no.2
• /
• pp.251-260
• /
• 1996

To evaluate the effect of low lactose special formula (MF-1) for the treatment of acute diarrhea, we studied thirty nine infants who were admitted with acute diarrhea to the Department of Pediatics, Yeungnam University Hospital. 39 infants of under 6 months of age who had been fed on formula feeds were randomly allocated to receive either a diluted regular formula milk or a low lactose special formula. Each infant received intravenous rehydration during fasting for 6-12 hours. Group 1 (n=15) was fed half strength of regular formula (80-100cc/kg/day) for the first 24 hours, three quarters strength formula (100-120cc/kg/day) for the next 24 hours, and continued feeding with the full strength regular formula milk. Group 2 (n=24), who fed the same amount of milk as Group 1, continued feeding with the full strength low lactose special formula from the start of feeding. Male to female sex ratio was 1.6 to 1. The characteristics of infants on admission were comparable in the age, the duration of diarrhea and the stool frequency before admission, the degree of dehydration. There were no significant differences in the duration of hospitalization, changes in stool weight and stool frequency after admission between two groups.(p>0.05) The Body weight and skin fold thickness were increased in group 2 who fed low lactose formula, but those who fed diluted regular formula showed reduction of body weight and skin fold thickness ($64.2{\pm}51.4g$ vs $-11.4{\pm}52.2g$, $0.6{\pm}0.8mm$ vs $-0.1{\pm}0.3mm$ respectively) during hospitalization. (p<0.05) We conclude that low lactose special formula milk can be recommended instead of diluted regular formula for acute diarrhea treatment in infants.

• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.193-200
• /
• 2016

Purpose: New low-cost oilseeds are needed to meet an ever-increasing demand for oil for food, pharmaceutical, and industrial applications. African oil bean seed is a tropical crop that is underutilized and has high oil yields, but there have been no studies conducted on its mechanical oil expression up to now. The objective of this work was to investigate the effect of moisture content and seed dimensions on mechanical oil expression from the seeds. Methods: Fresh oil bean seeds were procured, de-hulled, and cleaned. Initial seed moisture content, obtained in accordance with the ASAE standard, was 12% dry basis (db). The seeds were further conditioned by dehydration and rehydration prior to oil expression to obtain four other moisture levels of 8, 10, 14, and 16% db. The major diameter of the seeds was measured using digital vernier calipers, and the seeds were classified into size dimensions (< 40, 41-45, 46-50, 51-55, and > 55 mm). The oil yield and expression efficiency were obtained in accordance with standard evaluation methods. Results: The highest oil yield and expression efficiency (47.74% and 78.96%, respectively) were obtained for a moisture content of 8% db and seed dimensions of < 40 mm, while the lowest oil yield and expression efficiency (41.35% and 68.28%, respectively) were obtained for a moisture content of 14% db and seed dimensions between 51-55 mm. A mathematical model was developed to predict oil yield for known moisture content and seed dimensions, with a coefficient of determination $R^2$ of 95% and the confidence level of the predictive model of 84.17%. The probability of prediction F ratio showed that moisture content influence was more significant than seed dimensions. Conclusions: The higher the moisture content and larger the seed dimensions, the lower the oil yield from African oil bean seeds.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.780-787
• /
• 1989

The texturization properties of extrudate from isolated soybean protein and rice flour by extrusion cooking were investigated. The addition of up to 30% rice flur to isolated soy proetin could give more tenderness to the texturized extrudate. As the rice flour content increased, die temperature, nitrogen solubility index, and integrity index were decreased slightly with lower chewiness and gumminess. The water content of final extrudate was increased as the addition of rice flour increased, while density was maintained without variation, and rehydration ratio was decreased. The distribution of pressure profile during extrusion were in the range of $15-100kg/cm^3$. As the addition of rice flour increased, scanning electron micrographs demonstrated the gelatinized surface structure of rice starch and the increased air cell size of the testurized extrudate.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.724-728
• /
• 1995

Chemical compositions of dried Auricularia polytricha mushroom were analyzed when the dried mushroom were soaked in distilled water at different soaking condition. Physicochemical properties of soaked mushroom were investigated. Compositions of chemical components were 12.6% crude protein, 2.1% crude fat, 6.7% crude fiber and 6.2% ash. The contents of Ca, K, Mg were higher than those of other minerals in the sample, but Mn and Ni were of little quantities. The major amino acids of the sample were found to be aspartic and glutamic acid. The increase in the soaking time and temperature increased the ratio of water uptake, amount of water soluble solid, browning and pH value in the soak water. Ribonucleotide contents of the sample after soaking decreased depending on soaking time and temperature.

• Culinary science and hospitality research
• /
• v.21 no.1
• /
• pp.77-89
• /
• 2015

The objective of this study was to optimize processing conditions for the production of an instant puffed rice product using response surface methodology (RSM) and contour analysis. Sensory and texture qualities, and physical properties of the puffed rice were analyzed with various processing conditions related to drying and puffing temperature, and moisture content. Preference, color intensity, cohesiveness, rehydration ratio, density and lightness of the puffed rice product significantly varied depending on the processing conditions. The responses showed high $R^2$ values (0.623, 0.852, 0.735, 0.688, and 0.790) and lack-of-fit. Rehydration ratio was found to have a negative correlation with density in the condition of drying and puffing temperature. Lightness and preference scores of the puffed rice increased as the moisture content increased. According to RSM, the preference scores were very highly related to the moisture content, and the optimum processing conditions of the puffed rice product were at $40^{\circ}C$ of drying temperature, with 11.0% of moisture content, and at $232.7^{\circ}C$ of puffing temperature.

• Clean Technology
• /
• v.20 no.2
• /
• pp.108-115
• /
• 2014

Various metal chlorides and acid catalysts in ionic liquid solvent were investigated to directly convert cellulose into 5-hydroxymethylfurfural (5-HMF). Metal chlorides containing Sn(II), Zn(II), Al(III), Fe(III), Cu(II), and Cr(III) were used and acidic ionic liquid immobilized on silica gel as an acid catalyst and commercial acid catalysts (sulfuric acid, chloric acid, Amberlyst-15,DOWEX50x8) were used for comparison studies. The acid strength and amount of acid catalysts were probed with Hammett indicator. The selectivity and yield of 5-HMF were determined with reaction temperature, reaction time and catalyst ratio. A catalyst containing $CrCl_3-6H_2O$ and $SiO_2-[ASBI]HSO_4$ showed the highest selectivity and it was found that this catalyst had higher activity than commercial solid acid catalysts such as Amberlyst-15 and DOWEX50x8. The selectivity of 5-HMF appeared to be mainly dependent on the acid strength and catalyst ratio, it was found that levulinic acid was produced from 5-HMF by rehydration.

• Journal of the Korean Chemical Society
• /
• v.39 no.8
• /
• pp.627-634
• /
• 1995

Layered double hydroxides ($Mg-Al-CO_3$ systems, LDH), which are hydrotalcite-like anionic clay minerals, having different $Mg^{2+}\;to\;Al^{3+}$ ratio were synthesized by coprecipitation method. The subsequent products were characterized by the following methods; elemental analysis, X-ray powder diffraction, thermal analysis (DSC and TGA), FT-IR and $^{27}$Al-MAS NMR. X-ray powder patterns showed that the products formed were layered structure materials. Two heat absorption peaks were observed around 20 ∼280$^{\circ}C$ (surface water and interlayer water) and 280∼500$^{\circ}C$ (water from lattice hydroxide and carbon dioxide from interlayer carbonate) in DSC diagrams, and they were quantitatively analyzed by TGA diagrams (in case LDH4 16.2% and 28.6% respectively). FT-IR spectra indicate that the interlayer carbonate ions occupied symmetrical sites between two adjacent layers in a parallel direction. $^{27}$Al-MAS NMR spectra show only single resonance (8.6 ppm) of the octahedrally coordinated aluminum similar magnesium. When LDH4 was calcined at 560$^{\circ}C$ for 3 hours in air, its layered structure was destroyed giving a mixed metal oxide. However it readily became rehydrated in aqueous chromate solution to its original structure.

• Journal of Applied Biological Chemistry
• /
• v.57 no.4
• /
• pp.325-329
• /
• 2014

To maintain the quality of sweet persimmon during storage, the samples were treated with a combination of 50 ppm $ClO_2$ and 0.1% fumaric acid after harvest, packaged with low density polyethylene film, and stored at $1{\pm}1^{\circ}C$ for 35 days. The combined treatment reduced the populations of total aerobic bacteria, yeast and molds by 1.82 and 2.07 log CFU/g, respectively, compared to the control. During storage, hardness of all samples decreased, but total soluble solids and weight loss were not significantly different among treatments. In addition, high-quality dehydrated sweet persimmon was prepared using red algae extract as a dehydrating agent. The rehydration ratio and vitamin C content of red algae extract-treated sample were greater than those of hot-air dried sample. These results suggest that the combined treatment of $ClO_2$ and fumaric acid can be useful for maintaining microbiological safety of sweet persimmon during storage and dehydration of sweet persimmon slices using red algae extract is an efficient drying method for the preparation of high-quality dehydrated sweet persimmon.