• Journal of the Ergonomics Society of Korea
• /
• v.17 no.2
• /
• pp.11-23
• /
• 1998

Dynamic motion difference between normal subjects and low-back pain (LBP) patients has been investigated in terms of kinematic variables such as range of motion, velocity and acceleration of the back and hip. Ten healthy subjects and ten LBP patients were recruited in this study. Electro-goniometer such as Lumbar Motion Monitor and Hip Monitor have been used for quantitative measurement of the trunk motion during repetitive flexion and extension for ten seconds. Results indicated that the velocity and acceleration of the back and hip were important parameters to quantitatively identify LBP patients. The consistency of cyclic trunk motion and the relationship between the back and hip were measured in terms of Variance Ratio and Phase Angle in order to accurately assess the motion characteristics of LBP patients. In particular, the hip motion has been proven to be a very important factor in describing the kinematics of damaged lower back. The functional evaluation technique suggested in this study will be a tool to assist physicians for an accurate diagnosis and timely rehabilitation along with current image diagnosis techniques.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.6
• /
• pp.821-828
• /
• 2000

Metal - ceramic restorations have been the standard of fixed oral rehabilitation for over 30 years, and while many advances have been made in materials and research, the esthetic challenges of the light reflective metal substructure will always put clinician in an esthetic dilemma, for only a very talented ceramist / dentist team can create esthetics that rival nature on a repeatable basis. All ceramic restorations have also been a choice in our restorative armamentarium, but in the past, the materials have also had their own limitation, number on being question-able strength to withstand occlusal forces generated during mastication. IPS Empress 2 offers dentistry a metal free alternative to traditional restorative techniques. This clinical report describes the treatment of patients with esthetic problem of anterior dentition using Empress 2 system.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.4
• /
• pp.248-253
• /
• 2012

Maxillary obturator prosthesis is the most frequent treatment option for management of partial or total maxillectomy. Heavy weight of the obturators is often a dislocating factor. Hollowing the prosthesis to reduce its weight is the well established fact. The alternate technique to hollow-out the prosthesis has been described in this article which is a variation of previously described processing techniques. A pre-shaped wax-bolus was incorporated inside the flasks during packing of the heat-polymerized acrylic resin to automatically create the hollow space. The processing technique described is a single step flasking procedure to construct a closed-hollow-obturator prosthesis as a single unit. To best understand the technique, this article describes management of a patient who had undergone partial maxillectomy secondary to squamous cell carcinoma rehabilitated with a hollow-obturator prosthesis.

• Journal of Information Processing Systems
• /
• v.13 no.1
• /
• pp.8-25
• /
• 2017

This survey paper explores the application of multimodal feedback in automated systems for motor learning. In this paper, we review the findings shown in recent studies in this field using rehabilitation and various motor training scenarios as context. We discuss popular feedback delivery and sensing mechanisms for motion capture and processing in terms of requirements, benefits, and limitations. The selection of modalities is presented via our having reviewed the best-practice approaches for each modality relative to motor task complexity with example implementations in recent work. We summarize the advantages and disadvantages of several approaches for integrating modalities in terms of fusion and frequency of feedback during motor tasks. Finally, we review the limitations of perceptual bandwidth and provide an evaluation of the information transfer for each modality.

• Structural Monitoring and Maintenance
• /
• v.5 no.4
• /
• pp.429-443
• /
• 2018

Fatigue is a principal failure mode for steel structures, and it is still less understood than any other modes of failure. Fatigue life estimation of metal bridges is a major issue for making cost effective decisions on the rehabilitation or replacement of existing infrastructure. The fatigue design procedures given by the standard codes are either empirical or based on nominal stress approach. Since the fatigue life estimation through field measurements is difficult and costly, more researches are needed to develop promising techniques in the fatigue analysis of bridges through Finite Element Analysis (FEA). This paper aims to develop a methodology for the Fatigue life estimation of railway steel bridge using FEA. The guidelines of IIW-1823-07 were used in the development of the methodology. The Finite Element (FE) package ANSYS and the programming software MATLAB were used to implement this methodology on an Indian Railway Standard (IRS) welded plate girder bridge. The results obtained were compared with results from published literature and found satisfactory.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.17 no.1
• /
• pp.47-53
• /
• 2022

Objectives This case study aimed to investigate the effect of acupotomy and fascia chuna therapy on talipes cavus-type plantar fasciitis. Methods We classified the foot arch type using a podoscope and estimated the outcome by evaluating the numeric rating scale, pain disability index, and EuroQol-5-dimension measurement. Results After treatment, heel pain decreased and the quality-of-life score improved. Conclusions This study suggests that treatment with acupotomy and muscle energy techniques based on the foot arch type may be effective for plantar fasciitis. A limitation of this study is the small number of cases. Further clinical studies are required.

• Geomechanics and Engineering
• /
• v.32 no.5
• /
• pp.513-521
• /
• 2023

Temperature is one of the most critical elements that influence the rutting and fatigue resistance of flexible pavements. Particularly in extreme hot regions in Saudi Arabia, high temperature would significantly reduce the rutting resistance of flexible pavements leading to reduction of pavement service life. Due to the impacts of global warming, average temperature in Saudi Arabia is expected to further increase by about 4℃ by the end of the 21st century. The substantial increase in average temperature will elevate the expected pavement maintenance and rehabilitation cost. This paper analyzes the structural effects of temperature on pavement using layered elastic analysis based on finite element techniques. The research team calculated the potential loss of pavement service life due to the projected temperature increase and climate change. The paper also analyzed potential impact of using carbon waste in asphalt concrete to tackle the derogatory impacts of temperature rise.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.4
• /
• pp.196-201
• /
• 2017

Objective: Musculoskeletal neck pain have many symptoms which include decreased range of motion (ROM) and muscle strength, and increased pain. However, the management methods are controversial. The purpose of this study was to examine the effects of three interventions on ROM, strength, and pressure pain threshold (PPT) with musculoskeletal neck pain. Design: Pretest-posttest design. Methods: Thirty subjects participated in this experiment. They were randomly assigned to thefollowing groups: passive stretching (PS) group (n=10), massage (MASS) group (n=10), and muscle energy technique (MET) group (n=10). The treatment were applied bilaterally on the upper trapezius. The PS was applied 3 times for 30 seconds each time. The MASS was applied using two different techniques for 2 minutes per technique. For MET, the subjects performed 2 sets of 3 repetitions of isometric resistance exercise that was maintained for 10 seconds, followed by 10 seconds of rest. ROM, strength, and PPT parameters were measured after intervention. Results: In the MASS group, there was a significant improvement in all outcomes except for muscle strength (p<0.05). In the MET group, ROM and strength significantly improved compared to the pre-treatment results (p<0.05). As result of measuring the amount of change in each group, there was a significant difference in ROM (flexion) in the PS group compared with the MASS and MET group, a significant difference in strength in the MET group compared with the PS and MASS groups, and a significant difference in PPT in the MASS groups compared with the PS and MET groups (p<0.05). Conclusions: This study showed that PS, MASS, and MET are effective methods for improving ROM, strength, and PPT for musculoskeletal neck pain. Therefore, various therapeutic interventions for improving ROM, strength, and pain are suggested.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.4
• /
• pp.455-463
• /
• 2014

PURPOSE: The purpose of this study was to compare the effects of Graston and self-myofascial release (SMR) techniques on knee joint flexibility, hamstring, and quadriceps strength. METHODS: Twenty subjects with hamstring shortness participated in this study. The subjects were assigned randomly to one of two groups: The Graston technique (GT) group received intervention using a Graston instrument for one minute, and the SMR group performed self-exercises using a foam roll for one minute. The range of motion (ROM) of the knee joint was measured by active knee extension test, and a handheld dynamometer was utilized to collect the hamstring and quadriceps muscle strength. This experiment was performed by two physical therapists. The significant level was set at ${\alpha}$=0.05. RESULTS: The results were as follows: 1) The ROM of the knee joint and quadriceps muscle strength were significantly increased in both groups. 2) Hamstring muscle strength was significantly reduced in both groups. 3) There were no significant differences between the GT group and SMR group for any variable. CONCLUSION: The results of this study suggest that SMR is an effective and easy technique for restoring proper muscle length and strength in subjects with hamstring shortness. We recommend that SMR technique be used for treat hamstring shortness in clinical setting and home-program.

• Journal of the Korean Society of Physical Medicine
• /
• v.2 no.1
• /
• pp.1-10
• /
• 2007

Purpose : To identify the effects of Hold-Relax of proprioceptive neuromuscular facilitation (PNF) on the functional improvement of patients with neck myofascial pain syndrome. Methode : The present research investigated 60 patients with neck myofascial syndrome, dividing them into a group doing Hold-Relax of proprioceptive neuromuscular facilitation and a group doing Stretching, This study examined degree of recovery from neck pain by comparing their neck myofascial pain syndrome before and after the treatment, and compared two groups to find difference in the degree of recovery from myofascial pain syndrome. Results : 1. For Hold-Relax of proprioceptive neuromuscular facilitation group, the pain rating score (PRS) were significantly decreased for six weeks treatment. 2. For Stretching group, the pain rating score (PRS) did not indicate significant decrease for six weeks treatment. 3. For Hold-Relax of proprioceptive neuromuscular facilitation group, range of motion of flexion, left rotation, right rotation indicated significant difference after pre test and after two week but no significant difference after four week. 4. For Stretching group, range of motion of flexion, left rotation, and right rotation except extension indicated significant difference after pre test and after two week but no significant difference after four week. Conclusion : The Hold-Relax of proprioceptive neuromuscular facilitation is considered to be effective in increasing joint range of motion of patient and decreasing pain. Accordingly physical therapists has to learn a wide range of patterns and to develop various treatment techniques.