• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.335-344
• /
• 2000

The purpose of this study was to set up sizing system for knit trainning wears. Sample size was 198 females and their age range was from 15 to 24 years old. The body types for sizing system for knit trainning wears were divided by height and drop values. The results were as follows. 1. The height could be divided into three groups and they covered 97.5%. The Short(152cm) covered 27.8%, the Regular(160cm) 51.0% and the Tall(168cm) 18.7%. 2. The Medium hip(drop value 6) and the Large hip(drop value 12)had the high coverage rate of 45.5% and 46%, and the Small hip(drop value 0) had the low coverage rate of 8.6%. 3. For sizing system for knit trainning wears, the intervals of bust girth and hip girth were 5cm and 4cm. In the same size of bust girth, the intervals of hip high girth and waist girth were 1cm, the intervals of back waist length and sleeve length were 2cm and the interval of slacks length was 4∼5cm according to three height groups.

• The Korean Journal of Community Living Science
• /
• v.24 no.2
• /
• pp.221-231
• /
• 2013

This study was carried out to investigate the quality characteristics of Jeung-pyun using high yielding type rice (Dasan, Keunseom) and processing type rice (Daerip, Seolgang, Yangjo) for applying a new processes in rice food industry. The weight, volume, specific volume and expansion of Jeung-pyun were the highest in Dasan. The shapes of cross section showed that the air cell of Jeung-pyun made from Dasan and Daerip were smaller and more regular than Keunseom, Seolgang, and Yangjo. The Jeung-pyun of Daerip was the highest in L value, springiness, cohesiveness and chewiness, Keunseom was the highest in a value and hardness; Yangjo was the highest in b value, adhesiveness and gumminess. Jeung-pyun of Dasan was shown, through sensory evaluation, to be the highest in flavor, appearance and overall preference. The Jeung-pyun of Daerip was the highest in color and taste preference, while Seolgang was the highest in texture preference.

• Korean journal of food and cookery science
• /
• v.25 no.3
• /
• pp.387-394
• /
• 2009

This study was performed to determine the quality characteristics of Jeungpyun with the addition of soy yogurt (0%,3%, 6%, 9%, 12%). The proximate composition analysis showed that moisture contents of Jeungpyun were 49.87${\sim}$51.60%, and crush protein, lipid and ash contents were 2.58%, 0.21${\sim}$0.33% and 0.58${\sim}$1.05%, respectively. The pH ofJeungpyun was higher as the additive increased. Volume and symmetry index were higher as the additive increased, but uniformity index was no significant difference. L value and a value were the lowest in control group and increased with soy yogurt addition, while b value was decreased as amount of soy yogurt. Hardness, cohesiveness, gumminess were the highest in 9% group, springiness was the lowest in 9% group. In surface structure of Jeungpyun observed by SEM, cell size was the smallest and the cell uniformity was most regular in 12% group. According to sensory evaluation, appearance, taste and overall acceptance were highest in Jeungpyun with 9% soy yogurt. Therefore, Jeungpyun containing 9% soy yogurt was most preferable.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.2
• /
• pp.199-211
• /
• 2012

There have been studies to evaluate valuation of firms by using patents in various ways. Also, the theory that value of patents helps enterprise's growth is valid in economics. However, when evaluating the value of the company, through the patent evaluation has not been used. Because of previous studies researched relation between patents and firms only at certain points. To solve this problem, this study intends to analyze lag between patent and profitability of the firms. In this study, we classified top 100 software firms in the United States through PBR, PER and value of intangible assets by using cluster analysis. And we applied Almon's distributed lag model to each cluster to find out lag between patent and profitability of the firms. As a result, in the cluster of more valuable companies, patents have an effect on profitability of the firms at regular lags. This study indicates that the patents are an important indicator to assess companies.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.45.3-46
• /
• 2016

Solar activity shows a self-similarity as it has many periods of activity cycle in the time series of long-term observation, such as 13.5, 51, 150, 300 days, and 11, 88 years and so on. Since fractal dimension is a quantitative parameter for this kind of an irregular time series, we applied this method to long-term observations including sunspot number, total solar irradiance, and 3.75 GHz solar radio flux to predict the start and maximum times as well as expected maximum sunspot number for the next solar cycle. As a result, we found that the radio flux data tend to have lower fractal dimensions than the sunspot number data, which means that the radio emission from the sun is more regular than the solar activity expressed by sunspot number. Based on the relation between radio flux of 3.75 GHz and sunspot number, we could calculate the expected maximum sunspot number of solar cycle 24 as 156, while the observed value is 146. For the maximum time, estimated mean values from 7 different observations are January 2013 and this is quite different to observed value of February 2014. We speculate this is from extraordinary extended properties of solar cycle 24. As the cycle length of solar cycle 24, 10.1 to 12.8 years are expected, and the mean value is 11.0. This implies that the next solar cycle will be started at December 2019.

• The Korean Journal of Applied Statistics
• /
• v.34 no.6
• /
• pp.875-887
• /
• 2021

Value at Risk (VaR) is the most popular measure for market risk. In this paper, we consider the VaR estimation of portfolio consisting of a variety of assets based on multivariate copula model known as vine copula. In particular, sparse vine copula which penalizes too many parameters is considered. We show in the simulation study that sparsity indeed improves out-of-sample forecasting of VaR. Empirical analysis on 60 KOSPI stocks during the last 5 years also demonstrates that sparse vine copula outperforms regular copula model.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.161-170
• /
• 2014

Analog cassette tapes are easily changed due to environmental factors. To digitize is the best way to preserve a sound source. The way to digitize is to deal with the original sound to be enhanced to a variety of sources by playing through the audio card after recording. In this process to occur, it's the most important to remove various noise and equalizing sound in a method for preserving. It's studied about how to remove noise by using one of softwares, Cubase 5. 5, to remove hiss noise, which happens changing analog tape into digitalization. A amount of hiss noise is reduced to use X-Noise software of Wave which uses in Cubase 5.0, one of PLUG-IN. The noise is removed changing value of threshold and reduction every 10 times in no change of origin sound. To keep regular condition, the experiment to remove the hiss noise is conducted based on sound meondle, which is one of sound Nonmaegi. The noise is removed easily when the value of threshold is getting high in spite of giving a little value of reduction. However, as it gives a amount of reduction high, the damage rate of the sound source gets high.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.2
• /
• pp.126-132
• /
• 2014

PURPOSE. This study was conducted to evaluate the influence of the implant-abutment connection design and diameter on the screw joint stability. MATERIALS AND METHODS. Regular and wide-diameter implant systems with three different joint connection designs: an external butt joint, a one-stage internal cone, and a two-stage internal cone were divided into seven groups (n=5, in each group). The initial removal torque values of the abutment screw were measured with a digital torque gauge. The postload removal torque values were measured after 100,000 cycles of a 150 N and a 10 Hz cyclic load had been applied. Subsequently, the rates of the initial and postload removal torque losses were calculated to evaluate the effect of the joint connection design and diameter on the screw joint stability. Each group was compared using Kruskal-Wallis test and Mann-Whitney U test as post-hoc test (${\alpha}$=0.05). RESULTS. The postload removal torque value was high in the following order with regard to magnitude: two-stage internal cone, one-stage internal cone, and external butt joint systems. In the regular-diameter group, the external butt joint and one-stage internal cone systems showed lower postload removal torque loss rates than the two-stage internal cone system. In the wide-diameter group, the external butt joint system showed a lower loss rate than the one-stage internal cone and two-stage internal cone systems. In the two-stage internal cone system, the wide-diameter group showed a significantly lower loss rate than the regular-diameter group (P<.05). CONCLUSION. The results of this study showed that the external butt joint was more advantageous than the internal cone in terms of the postload removal torque loss. For the difference in the implant diameter, a wide diameter was more advantageous in terms of the torque loss rate.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.832-838
• /
• 2021

Recently, reports of marine accidents of small fishing vessels less than 10 tons have been increasing. In this study, the characteristics of the motion response in regular waves were analyzed using computations for these ships. Small vessels less than 10 tons are classified by size and used for marine accident investigations. Therefore, the motion response analysis was performed on three small fishing vessels of different sizes. In the case of the head sea, it was confirmed that as the speed of the vessel increased in the long wavelength region, the motion responses of heave and pitch became large. The motion response of the smallest 3-ton fishing vessel was greater than that of the other sizes of fishing vessels. The maximum value of the roll motion shifted to the long wavelength region as the speed gradually increased in the bow sea, regardless of the size of the ship. In all the three small fishing vessels, it was found that the roll motion was the greatest at 15 knots, the highest speed in both bow and beam seas. When sailing in the head sea and bow sea conditions, lowering the speed is one of the effective approaches to reduce the effects of the vertical and lateral plane motions. The roll motion caused by the beam wave showed a tendency to increase rapidly only at a specific wavelength regardless of the speed and the size of the vessel. It was confirmed that the roll motion was significantly reduced with forward speed in the stern wave compared to the bow wave. As there is a specific region where the maximum value of the hull motion response appears depending on the size and speed of the ship, an operation method that can minimize the effect of this motion should be considered and implemented.

• Korean Journal of Health Education and Promotion
• /
• v.4 no.2
• /
• pp.71-94
• /
• 1987

Aiming to investigate nutrient intake and food habits influenced by smoking for female college students in Seoul, the questionnaire survey for 763 students was carried out. The results of the survey was summarized as follows: 1. 9.7% of students were found as the current smokers and 18.9% of students had experienced of smoking, however stopped smoking at present(experienced smokers) respectively. 2. In the current smokers, they started smoking with friends at the first (58.9%), alone (27.4%), and with seniors (11.0%) respectively. The psychological frustration (52.2%), curiosity (28.4%) respectively motivated smoking behavior at the beginning. The most had smoking usually at the entertaining place such as restaurant. Only 6.4% of current smokers consumed more than 10 cigarettes daily, and 55% of current smokers inhaled deeply into the lung while they smoked. Even 26% of current smokers explained their intention of not smoking after marriage, and also about 95% of current smokers explained to stop smoking in the case of pregnancy. 3. It was found as the fact that the school age, economic status, and parental smoking affected their prevalence of cigarette smoking. The higher their schoolage, the higher smoking showed; the more their money spent and the lower father smoking showed ; the more their money spent and the lower father's educational level, the higher smoking showed; the more drink, the higher smoking showed. 4. The value evaluation of cigarette smoking also affected the prevalence of cigarette smoking. Of the students recognized advantageous parts of smoking, the prevalence of cigarette smoking was higher. 5. Logistic regression analysis was to determine the most effective factor which determined prevalence of cigarette smoking. The most effective factor was value evaluation of cigarette smoking. The order of effective factors was health value of cigarette smoking, their drinking capacity and the value evaluation of change in body weight due to smoking and smoking's advantages. 6. Cigarette smoking showed signs of affecting to food habits. In the case of smoking, the missing rate of taking regular meals was higher, and the frequency rate of taking regular meals was lower. Also, smokers took meals less regularly. Even the smokers took less candy than non-smokers, however, smokers liked to take more coffee, alcohol, and hot tasting food than non-smokers. 7. Smoking seemed to affect the nutritional status. It was found that smokers took many kinds of nutrients insufficiently, therefore their calory intake by age was not reached to RDA.