• Journal of the Korean Society of Costume
• /
• v.66 no.7
• /
• pp.154-170
• /
• 2016

The female leadership styles in the 21st century have been established as a major axis. Especially, the fashion of female politicians being exposed to the public during political activities has become a main element of a measure displaying visually female leadership styles in the 21st century and image making as well. Consequently, this study conducted qualitative research through the interview method to figure out regular voters' thoughts in depth about images being required for female political leaders and the fashion maximizing those images, and drew the detailed design elements. Suggesting the clothes design reflecting those elements for female political leaders by 3D virtual clothing works emerging as a new market creating profits related to fashion. The images which female political leaders have to have and were extracted through the interviews in this study, showed as feminine, strong leader, honest, and intelligent images, and also it was shown that female political leaders displaying proper images depending on the circumstances and using those images in politics rather than sticking to a fashion identity were favored by interviewees. The present study intends to contribute to being used as basic data of various research and fashion items of virtual reality and establishment of successful fashion strategy for female political leaders.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.4
• /
• pp.81-87
• /
• 1989

A cellular array multiplier for performing the multiplication of two elements in the finite field GF($2^m$) is presented in this paper. This multiplier is consisted of three operation part ; the multiplicative operation part, the modular operation part, and the primitive irreducible polynomial operation part. The multiplicative operation part and the modular operation part are composed by the basic cellular arrays designed AND gate and XOR gate. The primitive iirreducible operation part is constructed by XOR gates, D flip-flop circuits and a inverter. The multiplier presented here, is simple and regular for the wire routing and possesses the properties of concurrency and modularity. Also, it is expansible for the multiplication of two elements in the finite field increasing the degree m and suitable for VLSI implementation.

• Steel and Composite Structures
• /
• v.49 no.6
• /
• pp.667-684
• /
• 2023

In the context of finite element method, a computational simulation is presented to study and analyze the dynamic behavior of regularly perforated functionally graded rotating beam for the first time. To investigate the effect of perforation configurations, both regular circular and squared perforation patterns are studied. To explore impacts of graded material distributions, both axial and transverse gradation profiles are considered. The material characteristics of graded materials are assumed to be smoothly and continuously varied through the axial or the thickness direction according the nonlinear power gradation law. A computational finite elements procedure is presented. The accuracy of the numerical procedure is verified and compared. Resonant frequencies, axial displacements as well as internal stress distributions throughout the perforated graded rotating cantilever beam are studied. Effects of material distributions, perforation patterns, as well as the rotating beam speed are investigated. Obtained results proved that the graded material distribution has remarkable effects on the dynamic performance. Additionally, circular perforation pattern produces more softening effect compared with squared perforation configuration thus larger values of axial displacements and maximum principal stresses are detected. Moreover, squared perforation provides smaller values of nondimensional frequency parameters at most of vibration modes compared with circular pattern.

• Journal of the Korean housing association
• /
• v.21 no.3
• /
• pp.95-104
• /
• 2010

The purpose of this study was to found that the important design reform points for improvement of the public open space quality. For this purpose, surveyed the users of the public open space and the experts working for the public open space planning for the design elements of the public open spaces in terms of importance and satisfaction. The scope of the study was limited to Mapo-gu, Seoul and the buildings constructed since 1992 were sampled. the data collected were subject to Importance-Performance Analysis. As a result, 'waste boxes, vending machines and other amenities', 'characteristic floor and pedestrian environment', 'designs and their layout in harmony with the surrounding and landscape facilities', 'facilities checking and patrol for safety' and 'entire area of the public open space'. Based on the above findings, the following reform measures are put forwards for improvement of the public open space quality; First, the public open spaces should be equipped with sufficient amenities. Second, it is necessary to check the facilities regularly, while enhancing the safety through patrols. Third, it is essential to reflect user's needs in public open space planning, while applying the important design elements to the public facilities. Fourth, in order to create a comfortable pedestrian environment within the public open space, it is deemed necessary to divide the space into the passages for passers-by and the recesses for uses. Fifth, it is necessary to amend the Building Code to the effects that the radio of the landscaped area to the entire area can be readjusted together with the night lighting facilities. Sixth, it is desirable to give the weights to the important design elements for the public open spaces, so that the quality public open spaces can benefit from the incentives. In addition, regular maintenance and management should be ensured by policies.

• Structural Engineering and Mechanics
• /
• v.37 no.2
• /
• pp.233-251
• /
• 2011

The seismic provisions of the current edition (2005) of the National Building Code of Canada (NBCC) differ significantly from the earlier edition. The current seismic provisions are based on the uniform hazard spectra corresponding to 2% probability of exceedance in 50 years, as opposed to the seismic hazard level with 10% probablity of exeedance in 50 years used in the earlier edition. Moreover, the current code is presented in an objective-based format where the design is performed based on an acceptable solution. In the light of these changes, an assessment of the expected performance of the buildings designed according to the requirements of the current edition of NBCC would be very useful. In this paper, the seismic performance of a set of six, twelve, and eighteen story buildings of regular geometry and with concrete moment resisting frames, designed for Vancouver western Canada, has been evaluated. Although the effects of non-structural elements are not considered in the design, the non-structural elements connected to the lateral load resisting systems affect the seismic performance of a building. To simulate the non-structural elements, infill panels are included in some frame models. Spectrum compatible artificial ground motion records and scaled actual accelerograms have been used for evaluating the dynamic response. The performance has been evaluated for each building under various levels of seismic hazard with different probabilities of exceedance. From the study it has been observed that, although all the buildings achieved the life-safety performance as assumed in the design provisions of the building code, their performance characteristics are found to be non-uniform.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1631-1642
• /
• 1999

In this paper, we propose a new fault tolerant ATM Switch and a new adaptive self-routing scheme used to make the switch to be fault tolerant. It can provide more multiple paths than the related previous switches between an input/output pair of a switch by adding extra links between switching elements in the same stage and extending the self-routing scheme of the Banyan network. Our routing scheme is as simple as that of the banyan network, which is based on the topological relationships among the switching elements (SE’s) that render a packet to the same destination with the regular self-routing. These topological properties of the Banyan network are discovered in this paper. We present an algebraic proof to show the correctness of this scheme, and an analytic reliability analysis to provide quantitative comparisons with other switches, which shows that the new switch is more cost effective than the Banyan network and other augmented MIN’s in terms of the reliability.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.5
• /
• pp.528-535
• /
• 1988

This paper presents a constructing theory of variable arithmetic operation systems for computing multiplications and multiplicative inverse in GF(2**m) based on a modulo operation of degree on elements in Galois fields. The proposed multiplier is composed of a zero element control part, input element conversion part, inversion circuit, and output element conversion part. These systems can reduce reasonable circuit areas due to the common use of input/output element converison parts, and the PLA and module structure provice a variable property capable of convertible uses as arithmetic operation systems over different finite fields. This type of designs gives simple, regular, expandable, and concurrent properties suitable for VLSI implementation. Expecially, the multiplicative inverse circuit proposed here is expected to offer a characteristics of the high operation speed than conventional method.

• East Asian mathematical journal
• /
• v.36 no.5
• /
• pp.583-591
• /
• 2020

In [8, 9] they introduced a new finite element method for accurate numerical solutions of Poisson equations with corner singularities. They consider the Poisson equations with corner singularities, compute the finite element solutions using standard Finite Element Methods and use the extraction formula to compute the stress intensity factor(s), then they posed new PDE with a regular solution by imposing the nonhomogeneous boundary condition using the computed stress intensity factor(s), which converges with optimal speed. From the solution they could get an accurate solution just by adding the singular part. The error analysis was given in [5]. In their approaches, the singular functions and the extraction formula which give the stress intensity factor are the basic elements. In this paper we consider the biharmonic problems with the cramped and/or simply supported boundary conditions and get the singular functions and its duals and find properties of them, which are the cornerstones of the approaches of [8, 9, 10].

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.04a
• /
• pp.154-159
• /
• 1993

To develop the detailing methods at the ends of flexural shear walls. which are satisfying the ductility requirement corresponding to R = 3.5 and capable of improving the consturctibility, tests of ten isolated cantilever shear walls were carried out under the load condition comprising the cyclic lateral and constant vertical loads. major test parameters include the way of detailing and arrangement of transverse reinforcement in the boundary elements at the ends of walls, and placement of vertical reinforcement. From tests, comparable ductile behavior in test specimens incorporating the channel type of open hoops, compared with those incorporating the regular type of closed hoops, was observed.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.81-84
• /
• 2002

An approach for predicting the effective thermal conductivities of fiber-reinforce composite has been developed based on a thermal-electrical analogy. The unit cell of the composite laminate is divided into regular volume elements and the material properties have been given to each element. By constructing the series-parallel thermal resistance network, the thermal conductivities of composite both in-plane and out-of-plane direction have been predicted. Graphite/Epoxy composite is used for a balanced plain-weave composite laminate. By comparing the predicted results and the previous works, good agreement has been found.