• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.705-718
• /
• 2007

The purpose of this study was to evaluate 6 years cumulative survival rate (CSR, %) of mandibular posterior single tooth implants replaced with $Br{\aa}nemark$ $TiUnite^{(R)}$ implant system. The findings from this study were as followed ; 1. The 112 (111 persons) single implants that were placed in the mandibular posterior region were successful except 4 cases and showed 96.42% CSR. 2. The 55 (55 persons) single implants that were placed in the mandibular first molar region were successful except 2 cases and showed 96.36% survival rate. And, among the 57 (56 persons) single implants replacing the mandibular second molar. 2. failed showing 96.49% survival rate. There was no significant statistical difference. 3. Among the total 112 implants, 5.0mm wide diameter implants were placed in 96 cases(85.7%) showing 96.9% survival rate. 4.0mm standard diameter implants were placed in 16 cases showing 93.8% survival rate. There was no significant statistical difference. 4. Long implants above 10.0mm length were placed 103 cases(91.0%) and showed 96.1% survival rate. Short implants within 8.5mm length were placed 9 cases and showed 100% survival rate. There was no significant statistical difference. 5. 37 implants placed in type I, II bone quality were showed higher survival rate(100%) than that of 52 implants placed in type III, IV bone quality(92.3%). But, there was no significant statistical difference. In conclusion, $Br{\aa}nemark$ $TiUnite^{(R)}$ implant showed successful results when replacing manbibular single molar.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.1
• /
• pp.53-61
• /
• 2004

Absorption potential of desiccant solution significantly decreases after absorbing moisture from humid air, and a regeneration process requires a great amount of energy to recover absorption potential of desiccant solution. In an effort to develop an efficient solar water heater, this study examines a regeneration process using hot water obtained from solar water heater to recover absorption potential by evaporating moisture in the liquid desiccant. In this paper, a solar absorption dehumidifying system with solar water heater is suggested to save the electricity for operating an air conditioner. LiGl(lithium chloride) solution was adopted as a liquid desiccant in the proposed system, and hot water obtained from the solar water heater was used for regenerating the liquid desiccant. As a result, it was clear that the dilute LiCl solution could be regenerated by hot water, and the regeneration rate depends mostly on temperature level of liquid desiccant. The regeneration rates were about 2.4kg/h with $40^{\circ}C$, 4.0kg/h with $50^{\circ}C$, and 6.2kg/h with $60^{\circ}C$ of hot water respectively.

• Plant Resources
• /
• v.7 no.1
• /
• pp.7-14
• /
• 2004

Allium wakegi was cultured shoot tip in the condition of light culture. The Allium wakegi added plant growth regulator was observed of plant regeneration and bulblet formation. Callus Induction and growing rate was the best of 78％ when added alone 2,4-D 0.5mg/L. In the formation of shoot, its regeneration rate was 96％ when added BA 0.5mg/L in the light culture condition. When BA 0.5mg/L and NAA 0.5mg/L mixed and BA 0.5 mg/L and NAA 1.0mg/L mixed, the rates were 99％ and 97％ respectively, and these conditions were suitable for forming shoot. In the formation of roots, when added NAA 2.0mg/L in the light culture condition, the regeneration rate was 90.6 ％ and the roots were abnormal. When added NAA 1.0mg/L, the rate was 82 ％ and the highest. In the formation of bulbs, when BA 05mg/L and NAA 1.0mg/L mixed, the root generantion and its size in the bulbs was the best compare to other treatment experiments.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.1
• /
• pp.52-60
• /
• 2004

The optimized in vitro culture system was investigated for improvement of regeneration efficiencies by observing the responses of scutella-derived callus of Korean rice (Oryza sativa L.). Large variations of callus induction (43.9-93.9%) and shoot regeneration (0-88.7%) were observed among the rice cultivars depending on medium. However, shoot regeneration was significantly improved by selected utilization of basal medium, growth regulators, and carbon sources. N6 basal medium was more efficient for embryogenic callus induction than MS or LS basal medium, while MS was superior to N6 for shoot regeneration. The calli of highly regenerative cultivars grew faster and showed higher rates of green tissue formation (GT) and shoot regeneration (SR) and lower rate of callus browning (CB) than those of recalcitrant cultivars. Although a higher level of kinetin stimulated the GT and SR in highly regenerative cultivars, $10\textrm{mgL}^{-1}$ kinetin generally suppressed the GT and SR, while CB was accelerated compared to $2\textrm{mgL}^{-1}$ kinetin. Additional benefits of sorbitol combined with maltose (or sucrose) under $5\textrm{mgL}^{-1}$ kinetin were certainly confirmed on regeneration efficiencies compared to sucrose alone as carbon source and osmotic regulator. This combination showed high rate of GT and SR with multiple shoots while low rate of CB. With MSRK5SM-Pr medium ($5\textrm{mgL}^{-1}$ kinetin, 3% sorbitol, 2% maltose, $500\textrm{mgL}^{-1}$ proline), the regeneration efficiencies of total 17 out of 24 cultivars were practically improved 160% on average compared to MSRK2S ($2\textrm{mgL}^{-1}$ kinetin, 3% sucrose) control medium. Especially, the medium was most effective to the cultivars showing a medium level of regenerability such as Daesanbyeo and Dongjinbyeo and Suwon477, enhancing efficiencies more than 300-600% compared to MSRK2S medium.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.805-824
• /
• 2007

Purpose: Developments in micro/macrostructures of implants and surgical techniques brought out stable outcomes of implant dentistry. The aim of this study was to evaluate the distributions of implant patients, the types of implanted sites, and the success or survival rates of various implant systems and to analyze the implant placement done at each specificintraoral site and situation. Materials and Methods: The data of dental implantations collected between 1992 and 2006 at the Department of Periodontology in 00000 University Hospital were analyzed. Results: 1. Largest part of the patients were at the age of 40s and 50s in bothgender who lost their teeth mostly by periodontaldiseases and caries at the posterior intraoral sites as major ones. Bone densities of type II(mandible) and III(maxilla) were likely to be seen with quantity of type B. Lengths of the implants between 10 and 15 mm and wide platform took the largest part. 2. Survival rates of $Implantium^{(R)}(98.8%)$, $Xive^{(R)}(100%)$ and ITI $TE^{(R)}(100%)$ were high when $Frialit-2^{(R)}$ showed 82%(poor bone density area) or 87.2%(combined with additional therapy). $IMZ^{(R)}$ had lowest cumulative survival(67.5%) and success rate(49.4%) amongst all. 3. Replacement with 2 wide or 3 regular platforms showed no significant differences in survival rate and marginal bone loss atmandibular posterior area. In single restoration of mandibular second molar, 5-year success rate of machined surface $Br{\aa}nemark^{(R)}(70.37%)$ was lower than that of rough surface $ITI^{(R)}$ SLA(100%). 4. Replacement of single tooth in anterior area showed high survival rate of 94.5%. 5. The success rates of $Br{\aa}nemark$ Ti-Unite and ITI SLA at posterior maxilla with poor bone density both showed stable outcomes. 6. 10-year cumulative survival rate of implants with maxillary sinus augmentation by lateral window approach appeared to be 96.60%. Low survival rate(75%) was shown when there were more than two complications combined. Height of grafted bone remained stable above the implant apex. Conclusions : Rough surfaced implants showed stable outcomes in most of the situation including poor bone density and additional therapy combined.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.130-141
• /
• 1997

Work on the reduction of particulate matter(PM) from a diesel vehicl has led to a new trp system and a control method to control the combustion rate of the PM filtrated in the trap, which was named as 'Active Exhaust Feeding Regeneration(AEFR) System' by its operation mechanism. Ceramic cordierite filter is a major component of the trap and susceptible to thermal shock. Therefore the system should be designed to reduce the peak temperature and temperature gradients in the trap ; these have been considered to be the main factors causing thermal shock of the filter during the regeneration. It uses the engine's exhaust gas partially for the regeneration of the ceramic filter. It controlled bypass flow rate of the engine's exhaust gas precisely to control the temperature of the gas entrained into the filter. Gas temperatures were measured inside filter, and the oxygen concentration at the outlet of the filter was also monitored during the regeneration to analyze the combustion process of the PM. The temperature distributions and temperature gradients in the filter during the regeneration varied widely according to the regeneration control schemes. Finally, this system shows relatively low peak temperature and temperature gradients in the filter during its regeneration. It is considered that this system uses a mew method to control the combustion rate of the PM, which is different from the methods used in the previous studies.

• The Journal of the Korean dental association
• /
• v.48 no.1
• /
• pp.45-55
• /
• 2010

Purpose: The aim of this study was to evaluate 1 year cumulative survival rate of implants placed on augmented sinus using Osteon$^{(R)}$, bone graft material and to assess height of the grafted material radiographically. Material and Methods: 10 maxillary sinuses were augmented in 10 patients and 25 implant fixtures were installed simultaneously or after 6 months healing period. The height of the sinus graft material was measured using panoramic images immediately after augmentation and up to 19 months subsequently. Changes in the height of the sinus graft material were calculated with respect to implant length and original sinus wall height. Results: The cumulative survival rate was 100% in all 25 implants. Additionally, normal healing process without any complication was observed in all patients. The mean crown/Implant ratio was 1.25. The mean marginal bone loss was 0.95mm and the mean resorption rate of Osteon$^{(R)}$ was 0.05mm/month. The fastest resorption site of Osteon$^{(R)}$ is the first molar area. The grafted material was well maintained in sinus and decreased slightly over 1 year. Conclusion: In conclusion, It can be suggested that Osteon$^{(R)}$ may have predictable result when it was used as a grafting material for sinus floor augmentation.

• Journal of Periodontal and Implant Science
• /
• v.39 no.sup2
• /
• pp.205-212
• /
• 2009

Purpose: The aim of this retrospective study was to compare the survival rate of oxidized titanium implants and sandblasted large-grit acid etched implants in soft bone. Methods: 201 oxidized titanium implants were inserted in 84 patients between May 1999 and May 2004. 120 sandblasted large-grit acid etched implants were inserted in 74 patients between December 2000 and May 2004. The patients were followed-up 0${\sim}$5 years in ITI group or 0${\sim}$6 years in BRA group, respectively. The following information was collected from the patient records: age, gender, systemic disease, implant type, number, length and diameter of the implants, their location in the jaws, bone quantity, the number of failed implants, the causes of failure, and advanced surgery for bone augmentation. Results: In the oxidized titanium implants, 8 implants showed early failure, and 1 implant showed late failure, respectively. The cumulative survival rate was 95.48%. In the sandblasted large-grit acid etched implants, 1 implant showed late failure and cumulative survival rate was 99.10%. The cumulative survival rate and the survival rates in the case of the advanced procedure during the implant placement were not significantly different in both groups. Conclusions: Oxidized titanium implants and sandblasted large-grit acid etched implants can be used successfully in soft bone regardless of the surgical methods used during the implant placement. (J Korean Acad Periodontol 2009;39:205-212)

• Journal of Periodontal and Implant Science
• /
• v.35 no.2
• /
• pp.449-460
• /
• 2005

Objectives Aim of this study was to evaluate the clinical use and the efficacy of Frialit-2 implant system. Experimental Methods Fifty nine patients received placement of Frilalit-2 implants(137 implants) in their maxillary anterior and posterior sites(40 and 97 implants). Intraoral & clinical examination, chart review and radiographs were taken from each patient. Results 1. The total implant survival rate was 92.7% after a mean follow-up period of 19.9 months. 2. The implant survival rate placed in anterior region was 97.5%. 3. The implant survival rate placed in posterior region was 90.7%. 4. The implant survival rate placed in atrophic posterior maxilla with advanced technique (GBR, Sinus elevation) was 87.2%. 5. The implant survival rate placed in type N(D4) bone was 82%, while 95.7% in type III (D3), and 100% in type II(D2) bone. 6. Most of the failed implants(7 of 10) were removed during the maintenance stage after prosthodontic treatment. Conclusion It was concluded that Frialit-2 implant could be used satisfactorily in the esthetic anterior region, but the use in the posterior region, especially with poor bone quality and quantity, further studies are needed.

• Microbiology and Biotechnology Letters
• /
• v.23 no.3
• /
• pp.359-364
• /
• 1995

Two lactic strains, Leuconostoc mesenteroides Lu5 and Pediococcus pentosaceus P1 isolated from Kimchi, were used to determine the optimum conditions for protoplast formation and regeneration. The maximum protoplast formation rate was obtained with both strains at early exponential growth phase and decreased rapidly during growth phase. For P. pentosaceus P1, 30 $\mu$g/ml of lysozyme treatment was sufficient to obtain over 90% of protoplast formation and 300 $\mu$g/ml for L. mesenteroides Lu5, showing great difference in sensitivity of these strains to lysozyme. For both strains, best results were obtained at pH 7, using 0.5 M sucrose as osmotic stabilizer. For regeneration of protoplast, the highest regeneration rate was obtained after 15 minutes of lysozyme treatment and declined drastically with prolonged digestion.