• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.373-378
• /
• 2011

The present paper reports the study of binary mixtures and their properties over the entire range of composition at temperatures 288, 298, 308 and 318 K. Excess dielectric constant, excess molar volume, excess refractive index, molar refraction and excess molar refraction at different temperatures have been computed from the experimentally measured values of the aforesaid parameters and fitted to the Redlich-Kister equation. Excess dielectric constant, excess molar volume excess molar polarizations are negative whereas excess refractive indices are positive over entire mole fraction of methyl acetate for all temperatures. The results are discussed in light of intermolecular interactions occurring in the binary mixture. Estimated coefficients of the Redlich-Kister polynomials and the standard error along the coefficients are also reported.

• The Journal of Pediatrics of Korean Medicine
• /
• v.29 no.4
• /
• pp.12-22
• /
• 2015

Objectives Myopia has a higher prevalence rate in eastern countries, which also have a higher rate of educational fever compared to western countries. Considering this, social costs paid for myopia will increase rapidly in Korea. Although the development of myopia treatment is necessary, there has been a lack of relevant studies. Thus, this study aims to produce data to prevent unnecessary treatments and medical expenses. Methods The objective is to evaluate the effect of periocular acupressure exerted by a medical massager for myopia. This is an open-label, prospective, single-arm, and pre and post superiority study. The subjects are 7~12-year-old myopia patients with under 5 D (diopter) of spherical equivalent. A total of 56 subjects were enrolled. The selected subjects will wear the massager for 15 minutes twice a day for 24 weeks. The primary endpoint is the refraction change. The secondary endpoint is the axial length change. Statistical analysis was performed at a significant level of 0.05, using a two-tailed test. The criterion for significantly improved refraction was $-0.17{\pm}0.50$ D/6 months and that of axial length change was 0.126 mm. Results and Conclusions This study did not include a control group because children represent a vulnerable group. This objective study will bring some impact on Korean medical myopia treatment. A long-term confirmatory clinical study may be necessary in future.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.223-223
• /
• 2009

In this paper, designed and simulated Power Splitter (PS) integrated Mach-Zehnder interferometer (MZI) based planar type optical waveguide devices (which is called here a PS-MZI). The PS-MZI optical waveguide sensor was preceded by a Y-junction, which splits the input power between the sensor, and a reference branch, to minimize the effect of optical power variations. The PS-MZI optical waveguide sensor induced changing phases of the incident beam, which had fallen upon the waveguide through computer simulation, according to the small changes in the index of refraction, thus beam intensity was changed. The waveguide were optimized at a wavelength of 1550 nm and fabricated according to the design rule of 0.45 delta%, which is the difference of refractive index between the core and clad. The fabrication of PS-MZI optical waveguide sensor was performed by a conventional planar lightwave circuit (PLC) fabrication process. The PS-MZI optical waveguide that was fabricated to be applied as a biosensor revealed a low insertion loss and a low polarization-dependent loss. After having etched the over-clad at the sensor part in the MZI optical waveguide that was fabricated, Ti deposition was made on the adhesion layer, and then Au thin-film deposition was carried out thereon. In addition, its optical properties were measured by having changed the index of refraction oil at the sensing part of the MZI. To apply the planar type PS-MZI optical waveguide as a biosensor, a detection test for Staphylococcus aureus was conducted according to changes in concentration, having adopted Ti-alkoxide as ligand. The detection result of the S. aureus by the PS-MZI optical waveguide sensor was possible to the level of $10^1$ CFU/ml.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.763-770
• /
• 2017

A radome mounted on the front of an aircraft can cause refraction errors for various reasons that occur during maneuver in seeking and tracking a target. This refraction error means that the microwave seeker is detecting apparent target. An Interactive Multiple Model (IMM) algorithm is applied to estimate radome slope mounted on an aircraft in 3D space. However, even though the parameter of uncertain system model such as radome slope can be estimated, the estimated performance can not be guaranteed when it exceeds the range of the predicted value. In this paper, we propose a method to update the predicted value by using the radome slope as the mode parameter of the IMM algorithm, and confirm the radome slope estimation performance of the proposed method.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.1
• /
• pp.28-33
• /
• 2013

Multidirectional random waves that obliquely approach the shore were found to become directionally asymmetric due to refraction. The directional asymmetry was expressed in terms of the asymmetry parameter which is related to the maximum spreading parameter ($s_{max}$). In this study, we calculate variation of both the asymmetry and maximum spreading parameters at different water depths for various cases of incident wave angles and maximum spreading parameters in deep water. These values are different from Goda and Suzuki (1975) who neglected directional asymmetry of waves. In calculating directional asymmetry and maximum spreading parameters, we use the JONSWAP spectrum (Hasselmann et al., 1973) and Lee et al.'s (2010) directional distribution function. The processes and results are nondimensionalized with significant wave height, peak frequency and peak wave length in deep water.

• Journal of Navigation and Port Research
• /
• v.28 no.7
• /
• pp.619-627
• /
• 2004

Introduction of wave model, considered the effect of shoaling, refraction, diffraction, partial reflection, bottom friction, breaking at the coastal waters of complex bathymetry, is a very important factor for most coastal engineering design and disaster prevention problems. As waves move from deeper waters to shallow coastal waters, the fundamental wave parameters will change and the wave energy is redistributed along wave crests due to the depth variation, the presence of islands, coastal protection structures, irregularities of the enclosing shore boundaries, and other geological features. Moreover, waves undergo severe change inside the surf zone where wave breaking occurs and in the regions where reflected waves from coastline and structural boundaries interact with the incident waves. Therefore, the application of mild-slope equation model in this field would help for understanding of wave transformation mechanism where many other models could not deal with up to now. The purpose of this study is to form a extended mild-slope equation wave model and make comparison and analysis on variation of harbor responses in the vicinities of Ulsan Harbor and Ulsan New Port, etc. due to construction of New Port in Ulsan Bay. We also considered the increase of water depth at the entrance channel by dredging work up to 15 meters depth in order to see the dredging effect. Among several model analyses, the nonlinear and breaking wave conditions are showed the most applicable results. This type of trial might be a milestone for port development in macro scale, where the induced impact analysis in the existing port due to the development could be easily neglected.

• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.257-262
• /
• 2005

Environmental problems and safety problems in coastal area is one of the most important factors for designing coastal structures and maintaining facilities in coastal zone. And thus study on Wave transformation around coastal area is very important to develope a new port or on industrial area. Delft 3D-WAVE is applied to Ulsan new port area and the culculated results are analysed and compared with measured data Delft 3D-wave module is based on SWAN model which considers wave shoaling and refraction for irregular wave. This module also covers wind effect, bottom friction. white-capping and wave breaking effect. The results of this study show a good agreement with measured data and thus Delft 3D-WAVE module can be applied to simulate irregular wave transformation in coastal area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.619-633
• /
• 1994

A wave deformation model for general purpose combined refraction, diffraction, and breaking is developed in the shallow water. A parabolic approximation equation considered a higher order diffraction term is derived from the previous mild slope equation. A wave energy dissipation term due to bottom friction and breaking is introduced from the turbulence model. The Crank-Nicoloson implicit scheme is used in the numerical calculation, then the solutions are compared with the various hydraulic experiment data in the circular, the elliptic shoal, and the surf zone. The wave height decay in the surf zone is sensitively affected by the incident wave steepness, and the wave height variation around the elliptic shoal is well explained by the non-linear dispersion relation and the wave energy dissipation term. The model is also applied to a field coastal area and reasonable results are obtained.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.135-140
• /
• 1999

To investigate the visual acuity of the women middle and high school students, the visual acuity test was performed the object and subject methods. The results were as follows; 1. The eye types were 96.7% positive for myopia, 2.5% for emmetropia, and 0.8% for hyperopia, respectively. 2. The abnormal refraction eyes were 61% positive for simple myopia, 35.2% for myopitic compound astigmatism, 3% for myopic simple astigmatism, and 0.8% for simple presbyopia, respectively. 3. The asix of astigmatism were 95% positive for irregular astigmatism axis, 3% for regular astigmatism axis, and 2% for oblique astigmatism axis, respectively. 4. On the total myopic spheric power, the -0.50

• Tunnel and Underground Space
• /
• v.9 no.2
• /
• pp.158-167
• /
• 1999

There are substantial difficulties in assessing the volume of soill/rock to be excavated and the cost thereof, which is attributable to the subjective and qualitative methods of rock mass classification prevailing at the moment. This paper intends to introduce more objective and quantitative rock mass classification method easily applicable to the excavation of granites in Muakjae, Seoul. As a result of such study it is proven that Schmidt hammer and point load strength tests are fairly reliable and easily applicable to estimate and quantify uniaxial compressive strength of granitic material in Seoul. In an efforts to confirm the granitic rock mass conditions in 12 meters underground, seismic refraction surveys were made on the top of vertical exposures from where underlying rock mass conditions could be directly inspected. Rock mass boundaries determined by seismic refraction methods were found to agree within a 1m variance with visible differences in rock mass conditions in the vertical exposure beneath the test site. Thus it can be concluded that detailed geotechnical mapping on cutting slopes is a most efficient, dependable and cost-effective technique in assessing likely excavation conditions of shallow granitic mass in Seoul.