• 대한전자공학회논문지TC
• /
• 제40권9호
• /
• pp.392-397
• /
• 2003

Lange 커플러를 이용한 반사구조 위상변위기는 광대역에서 위상변이를 얻는데 사용되는 회로이다. 이런 5-비트 반사구조에서 33.75°는 대개 11.25°와 22.5°를 동시에 "on"시켜서 얻는 방법이 사용되어져 왔다. 본 논문은 33.75° 위상특성을 개선하기 위하여 GaAs PM 다이오드와 리액티브 부하로 구성된 별도의 회로를 제안하였으며 MMIC로 구현하였다. 2-6 GHz에서 제안된 회로는 기 발표 논문에 비하여 33.75°를 기준으로 할 때 평균 4.7° 개선된 특성을 얻었다. 기존 회로와 비교할 때 삽입손실 및 반사손실은 거의 변화가 없었다.

• 한국광학회지
• /
• 제29권1호
• /
• pp.28-31
• /
• 2018

본 논문에서는 이중 광 콜리메터 광학계와 바이메탈 엑추에이터를 이용한 가변 광감쇠기를 제안하고 구현하였다. 입력광섬유와 출력광섬유 사이의 광손실은 바이메탈에 부착된 반사거울의 기울어진 각으로 조절되어진다. 바이메탈은 열전소자(TEC)에 의해 가열되거나 냉각되며 이로 인해 구부림이나 펴짐으로 인하여 반사거울을 움직이게 한다. TEC에 가해지는 전기신호로 원하는 광감쇠량을 얻을 수 있다. 제작된 소자는 0.5 dB의 삽입손실, 0.2 dB의 편광의존성 손실 및 40 dB 이상의 가변변위를 보였다. 반응 시간은 약 5초였다.

• 한국전자파학회논문지
• /
• 제16권2호
• /
• pp.228-234
• /
• 2005

준 마이크로파 대역용 전자파 노이즈의 흡수체로서 자성 복합 시트를 개발하였다. Fe-Si-Al 자성 분말을 attrition mill을 이용해 편상화한 후 이것을 polymer와 혼합 분산시켜 전자파의 입사 방향에 수직한 방향으로 배향된 자성 복합 시트를 제조하였다. Attrition milling 시간이 긴 편상 분말일수록 제조된 자성 복합체의 유전율은 증가하나 투자율은 다소 감소하는 경향을 보인다. 또한 오랜 시간 milling한 편상 분말일수록 임피던스 정합 주파수는 저주파 쪽으로 이동하나 정합 주파수에서의 전자파 흡수율은 감소한다. 이러한 결과들로부터 복합 자성체의 유전율과 투자율의 주파수 특성을 제어하여 1.4 GHz에서 -8.2 dB의 반사 손실 특성을 갖는 두께 1.0 mm의 노이즈 흡수 시트를 개발하였다.

• 대한전자공학회논문지SD
• /
• 제40권8호
• /
• pp.580-587
• /
• 2003

본 논문에서는 진행파형 전계흡수 변조기 (TW-EAM: traveling-wave electroabsorption modulator)의 선형성을 분석하기 위한 새로운 모델을 제시한다. TW-EAM은 소자의 길이, 마이크로파 손실 (microwave loss, ML), 그리고 임피던스 부정합에 의한 내부반사(internal reflection, IR) 등이 소자의 선형성에 영향을 미친다. 소자의 길이의 증가는 혼변조 왜곡 (intermodulation distortion, IMD)이 최소가 되는 전원전압의 크기를 감소시킨다. ML의 증가는 3차 혼변조 왜곡 (third-order IMD, IMD3)의 감소와 동시에 출력신호의 전력도 감소시킨다. IR은 입력주파수의 파장과 소자의 길이에 따라 각기 다른 IMD 특성을 나타낸다. ML 또는 IR에 의한 SFDR (spurious-free dynamic-range)의 변화는 거의 없었으며, TW-EAM의 IR을 이용하면 ML에 의한 신호 전력의 감쇄를 보상해 줄 수 있음도 알 수 있었다. 결과적으로 50 GHz 대역의 RF-광통신용 TW-EAM은 길이가 0.8 mm이고 출력단의 임피던스 부정합을 이용하면서 최소의 손실을 가지는 구조가 적당함을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.382-382
• /
• 2010

$TaO_2$ thin films as gate dielectrics have been proposed to overcome the problems of tunneling current and degradation mobility in achieving a thin equivalent oxide thickness. An extremely thin $SiO_2$ layer is used in order to separate the carrier in MOSFETchannel from the dielectric field fluctuation caused by phonons in the dielectric which decreases the carrier mobility. The electronic and optical properties influenced the device performance to a great extent. The atomic structure of amorphous and crystalline Tantalum oxide ($TaO_2$) gate dielectrics thin film on Si (100) were grown by utilizing atomic layer deposition method was examined using Ta-K edge x-ray absorption spectroscopy. By using X-ray photoelectron spectroscopy and reflection electron energy loss spectroscopy (REELS) the electronic and optical properties was obtained. In this study, the band gap (3.400.1 eV) and the optical properties of $TaO_2$ thin films were obtained from the experimental inelastic scattering cross section of reflection electron energy loss spectroscopy (REELS) spectra. EXAFS spectra show that the ordered bonding of Ta-Ta for c-$TaO_2$ which is not for c-$TaO_2$ thin film. The optical properties' e.g., index refractive (n), extinction coefficient (k) and dielectric function ($\varepsilon$) were obtained from REELS spectra by using QUEELS-$\varepsilon$(k, $\omega$)-REELS software shows good agreement with other results. The energy-dependent behaviors of reflection, absorption or transparency in $TaO_2$ thin films also have been determined from the optical properties.

• 한국해양공학회지
• /
• 제21권4호
• /
• pp.1-7
• /
• 2007

Based on the eigenfunction expansion method, the wave-absorbing performance of a square or circular pile breakwater was investigated. Flow separation resulting from sudden contraction and expansion is generated and is the main cause of significant energy loss. Therefore, evaluation of an exact energy loss coefficient is critical to enhancing the reliability of the mathematical model. To obtain the energy loss coefficient, 2-dimensional turbulent flow is analyzed using the FLUENT commercial code, and the energy loss coefficient can be obtained from the pressure difference between upstream and downstream. It was found that energy loss coefficient of circular pile is 20% that of a square pile. To validate the fitting equation for the energy loss coefficient, comparison between the analytical results and the experimental results (Kakuno and Liu, 1993) was made for square and circular piles with good agreement. The array of square piles also provides better wave-absorbing efficiency than the circular piles, and the optimal porosity value is near P=0.1.

• 한국자기학회지
• /
• 제11권1호
• /
• pp.14-20
• /
• 2001

The structure, shape, size, and magnetic properties of Ni$_{0.5}$Cu$_{0.1}$Zn$_{0.4}$Fe$_2$O$_4$ have been investigated as a function of annealing temperatures. In order to control the microwave absorbing properties of ferrite-rubber composite and the complex losses (magnetic loss and conduction loss), the effect of carbon addition was also studied. It was found that the coercive force decreased with increasing heat-treatment temperatures. Relative complex permeability and reflection loss were measured by the network analyzer. As a result, the natural resonance occurred in the low frequency tinge, and the matching frequency of the ferrite-rubber composite prepared at 130$0^{\circ}C$ was found to be lower. As heat-treatment temperatures were increased, the magnetic loss ($\mu$$_{r}$", $\mu$$_{r}$′) and the dielectric loss ($\varepsilon$$_{r}$"/$\varepsilon$$_{r}$′) were increased. It was caused that the absorption characteristics of the absorber were improved. The conduction loss and magnetic loss were expected to be occurred together because two matching frequencies were shown with carbon addition. It was confirmed that the matching frequency of the microwave absorber could be controlled by controlling heat-treatment temperatures and carbon additions.ons.tions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권9호
• /
• pp.3194-3210
• /
• 2022

Wall obstruction is the main factor leading to the non-line of sight (NLoS) error of indoor localization based on received signal strength indicator (RSSI). Modeling and correcting the path loss of the signals through the wall will improve the accuracy of RSSI localization. Based on electromagnetic wave propagation theory, the reflection and transmission process of wireless signals propagation through the wall is analyzed. The path loss of signals through wall is deduced based on power loss and RSSI definition, and the theoretical model of path loss of signals through wall is proposed. In view of electromagnetic characteristic parameters of the theoretical model usually cannot be accurately obtained, the statistical model of NLoS error caused by the signals through the wall is presented based on the log-distance path loss model to solve the parameters. Combining the statistical model and theoretical model, a hybrid model of path loss of signals through wall is proposed. Based on the empirical values of electromagnetic characteristic parameters of the concrete wall, the effect of each electromagnetic characteristic parameters on path loss is analyzed, and the theoretical model of regional path loss of signals through the wall is established. The statistical model and hybrid model of regional path loss of signals through wall are established by RSSI observation experiments, respectively. The hybrid model can solve the problem of path loss when the material of wall is unknown. The results show that the hybrid model can better express the actual trend of the regional path loss and maintain the pass loss continuity of adjacent areas. The validity of the hybrid model is verified by inverse computation of the RSSI of the extended region, and the calculated RSSI is basically consistent with the measured RSSI. The hybrid model can be used to forecast regional path loss of signals through the wall.

• 조명전기설비학회논문지
• /
• 제30권2호
• /
• pp.11-19
• /
• 2016

By incorporating a polarization-diversity loop configuration, we have demonstrated the inline switching of transmission and reflection spectra of one of two short-period fiber gratings (SPFGs) with different resonance wavelengths without reconfiguring the filter structure. The proposed filtering apparatus consists of a fiber-pigtailed polarization beam splitter, two SPFGs, and three quarter-wave plates (QWPs). The proposed filter can independently choose the transmission or reflection spectrum of each SPFG through the appropriate adjustment of the orientation angles of the QWPs within the filter without additional optical switches and couplers. The average insertion loss, band rejection ratio, and side-mode suppression ratio of the fabricated filter were measured as ~4.59, ~17.88, and ~19.67dB, respectively.

• 한국전자파학회논문지
• /
• 제24권7호
• /
• pp.722-729
• /
• 2013

본 논문에서는 밀리미터파 대역에서 저손실 전송 선로로 많이 사용되고 있는 구형 도파관의 단면 치수 변화가 전송 특성에 미치는 영향을 검토하였다. 도파관 내부의 그린 함수를 고유 모드 함수 전개법으로 구하고, 도파관 내부에 포스트를 설치한 구조의 내부 임피던스로부터 반사 계수 표현식을 도출하였으며, 도파관의 단면 치수 변화가 반사 계수에 미치는 영향을 검토하였다. 이론 해석의 타당성을 검증하기 위해 반사 계수를 측정하고, 이론치와 비교하였다.