• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.450-456
• /
• 2016

STDR (sequence time domain reflectometry) to detect a cable fault using a pseudo noise sequence as a reference signal, and time correlation analysis between the reference signal and reflection signal is robust to noisy environments and can detect intermittent faults including open faults and short circuits. On the other hand, if the distance of the fault location is far away or the fault type is a soft fault, attenuation of the reflected signal becomes larger; hence the correlation coefficient in the STDR becomes smaller, which makes fault detection difficult and the measurement error larger. In addition, automation of the fault location by detection of phase and peak value becomes difficult. Therefore, to improve the cable fault detection of a conventional STDR, this paper proposes the algorithm in that the peak value of the correlation coefficient of the reference signal is detected, and a peak value of the correlation coefficient of the reflected signal is then detected after removing the reference signal. The performance of the proposed method was validated experimentally in low-voltage power cables. The performance evaluation showed that the proposed method can identify whether a fault occurred more accurately and can track the fault locations better than conventional STDR despite the signal attenuation. In addition, there was no error of an automatic fault type and its location by the detection of the phase and peak value through the elimination of the reference signal and normalization of the correlation coefficient.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.2
• /
• pp.28-30
• /
• 2017

Purpose Anti-Glutamic acid decarboxylase antibody test (GAD Ab) has been used as a predictor of type 1 diabetes. GAD Ab has also been shown to be highly potent in cerebrospinal fluid (CSF) of patients with suspected diabetic peripheral neuropathy. Recently, it has been known that clinical significance of GAD Ab using CSF is useful for the neurological disorders. However, the reference value of anti-GAD Ab has been provided only for serum. In this experiment, we estimated the reference value of anti-GAD antibody for CSF in neurological patients. Materials and Methods A total of 211 neurological patients were enrolled. Serum and CSF were analyzed by radioimmunoassay (RIA) using commercial RIA anti-GAD Ab kit (RSR, London, United Kingdom). Normal saline was used as the normal CSF control because CSF is most similar to 0.9% normal saline. Results The mean value of normal CSF control was 1.97 U/mL, and two standard deviations (2SD) was 1.44 U/mL. Based on this data, the expected reference range of CSF could be estimated from 0.54 U/mL to 3.40 U/mL Conclusion The reference range of normal CSF control using normal saline obtained with Hoffmann's method. However, there will be a need to validate the CSF reference values using human normal CSF.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.1
• /
• pp.20-26
• /
• 2013

Objectives: This study was conducted to evaluate the health risk of workers exposed to butyl glycidyl ether to prevent them from developing occupational diseases. Methods: The workplaces that coat floor with epoxy were selected and the samples were collected and analyzed with NIOSH 1616 Method. We calculate workplace reference concentration using with NOAEL estimated by the study of Anderson et al. in 1978. Risk was calculated by the ratio of exposure to workplace reference concentration. Monte-Carlo simulation was performed to derivate the median, cumulative 90%, and cumulative 95% value by using Crystal Ball. Results: Butyl glycidyl ether is a skin, eye irritator and can result in central nervous system depression, allergic reaction. NOAEL was 38 ppm and workplace reference concentration was calculated as 0.73 ppm corrected with uncertainty factors. Geometric mean was 1.152 ppm and geometric standard deviation was 1.522 by the workplace environment measurement. The median, cumulative 90%, and cumulative 95% value of risk were calculated as 1.617, 1.934, and 2.092, respectively. Conclusions: Not only cumulative 90% and cumulative 95% value but also the median of risk is higher than 1.0 by the risk characterization, so it can do a lot of harm to workers. Therefore, the process of derivating workplace reference concentration and the appropriacy of the uncertainty factors should be re-examined.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.265-267
• /
• 2000

A method to compute the reactive powers of the added buses by the decoupled UPFC model for the optimal voltage profile is presented, by which the voltage magnitudes of PQ buses can get closer to the reference value(usually one p.u.). The performance index for assessing how much the voltage magnitude is closer to the reference value is defined as the squared sum of the present voltage minus the reference voltage multiplied by the weighting number associated with the relative importance of the buses. Numerical example in a 10-unit 39-bus power system with 2 UPFC's shows that the performance index can be very much reduced by operating multi UPFC's with the reactive powers for the optimal voltage profile proposed in this paper.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.259-262
• /
• 2012

In this paper, we propose a new fast algorithm for effective scene change detection. The proposed algorithm exploits Otsu threshold matching technique, which was proposed earlier. In this method, the current and the reference frames are divided into square blocks of particular size. After doing so, the pixel histogram of each block is generated. According to Otsu method, every histogram distribution is assumed to be bimodal, i.e. pixel distribution can be divided into two groups, based on within-group variance value. The pixel value that minimizes the within-group variance is said to be Otsu threshold. After Otsu threshold is found, the same procedure is performed at the reference frame. If the difference between Otsu threshold of a block in the current frame and co-located block in the reference frame is larger than predefined threshold, then a scene change between those two blocks is detected.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.470-475
• /
• 2002

Instantaneous following PWM control technique is pulsed nonlinear dynamic control method. This new control technique using analog integrator is proposed to control the duty ratio D of do-dc converter. In this control method, the duty ratio of a switch is exactly equal In or proportional to the control reference in the steady state or in a transient. Proposed control method compensates power source perturbation in one switching cycle, and the average value of the dynamic reference in one switching cycle. There is no steady state error nor dynamic error between the control reference and the average value of the switched variable. Experiments with buck converter have demonstrated the robustness of the control method and verified theoretical prediction. The control method is very general and applicable to all type PWM

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.378-381
• /
• 2002

Instantaneous following PWM control technique is pulsed nonlinear dynamic control method. This new control technique using analog integrator is proposed to control the duty ratio D of DC-DC converter. In this control method, the duty ratio of a switch is exactly equal to or proportional to the control reference in the steady state or in a transient. Proposed control method compensates power source perturbation in one switching cycle, and the average value of the dynamic reference in one switching cycle. There is no steady state error nor dynamic error between the control reference and the average value of the switched variable. Experiments with buck converter have demonstrated the robustness of the control method and verified theoretical prediction. The control method is very general and applicable to all type PWM.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.11
• /
• pp.531-535
• /
• 2000

A method to compute the reactive powers of the added buses by the decoupled UPFC model for the optimal voltage profile is presented, by which the voltage magnitudes of PQ buses can get closer to the reference value(usually one p.u.). The performance index for assessing how much the voltage magnitude is closer to the reference value is defined as the squared sum of the present voltage minus the reference voltage multiplied by the weighting number associated with the relative importance of the buses. Numerical example in a 10-unit 39-bus power system with 2 UPFC's shows that the performance index can be very much reduced by operating many UPFC's with the reactive powers for the optimal voltage profile proposed in this paper.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.103-105
• /
• 2002

Instantaneous following PWM control technique is pulsed nonlinear dynamic control method. This new control technique using analog integrator is proposed to control the duty ratio D of Cuk converter. In this control method, the duty ratio of a switch is exactly equal to or proportional to the control reference in the steady state or in a transient. Proposed control method compensates power source perturbation in one switching cycle, and the average value of the dynamic reference in one switching cycle. There is no steady state error nor dynamic error between the control reference and the average value of the switched variable. Experiments with Cuk converter have demonstrated the robustness of the control method and verified theoretical prediction. The control method is very general and applicable to all type PWM.

• Korean Journal of Clinical Laboratory Science
• /
• v.40 no.2
• /
• pp.86-93
• /
• 2008

This study was performed to investigation of the serum alpha-fetoprotein (AFP) levels in healthy adults. A total of 2,160 (male 1,415, female 745) health checkup adults were examined for AFP levels by chemiluminescence immunoassay (CLIA) method, during the period from September, 2007 to August, 2008. The mean serum AFP level was 2.168 (0.605~20.35) ng/mL, and it was 2.309 (0.605~20.35) ng/mL in male, 1.906 (0.605~10.36) ng/mL in female, respectively. 1,816 (male 1,109, female 709) healthy adults were screened for the absence of viral hepatitis and normal alanine amino transferase (ALT) levels. The mean serum AFP level of healthy adult was 2.041 (0.605~7.83) ng/mL, and it was 2.181 (0.605~7.83) ng/mL in male, 1.822 (0.605~6.55) ng/mL in female, respectively. Serum AFP increased with age group, there was a higher level in male compared to female. These results suggests that the use of reference value of AFP in healthy adults in the Jeonbuk. With the reference value now defined, it becomes possible to compare levels in different populations.