• Progress in Superconductivity and Cryogenics
• /
• v.21 no.4
• /
• pp.44-47
• /
• 2019

This paper is a study of recovery under load process of superconducting fault current limiter (SFCL). SFCL consists of five parallel-connected high-temperature superconductor (HTS) tapes additionally stabilized by stainless tape. Previously, HTS was heated by current pulse to simulate a short circuit in a power grid. During the cooling period, the current amplitude decreased to 23% or less of HTS critical current value, which is the simulation of network re-switching. When HTS with a polymer coating is cooled, temperature gradient on thermal insulation layer occurs, that prevents a boiling crisis and improves the heat sink into liquid nitrogen. Two samples are coated with a 30 ㎛ and 50 ㎛ polylactide (PLA) layers, reference sample has no polymer coating on it. Samples with a polymer coating show 3-5 times faster cooling than the reference one.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.1
• /
• pp.45-58
• /
• 2002

In this paper, we designed the circuit of drive control for towing winch. It is composed of reference voltage circuit for driving voltage reference, low pass filter circuit for noise reduction, dead zone circuit for initial transient input, and driving circuit for drum direction/velocity control. Also it is realized a drive control circuit for towing winch drum in accordance with PWM(pulse width modulation) method to suit it's purpose of a large capacity driving system. The performance of the designed circuit is analyzed by experiments and the appliablity for driving the towing winch drum satisfactorily is evaluated through a various testing.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.5
• /
• pp.315-322
• /
• 2019

DSM (Digital Surface Model) is a digital representation of ground surface topography or terrain that is widely used for hydrology, slope analysis, and urban planning. Aerial photogrammetry and LiDAR (Light Detection And Ranging) are main technology for urban DSM generation but high-resolution satellite imagery is the only ingredient for remote inaccessible areas. Traditional automated DSM generation method is based on correlation-based methods but recent study shows that a modern pixelwise image matching method, SGM (Semi-Global Matching) can be an alternative. Therefore this study investigated the application of SGM for Kompsat satellite data of KARI (Korea Aerospace Research Institute). Firstly, the sensor modeling was carried out for precise ground-to-image computation, followed by the epipolar image resampling for efficient stereo processing. Secondly, SGM was applied using different parameterizations. The generated DSM was evaluated with a reference DSM generated by the first pulse returns of the LIDAR reference dataset.

• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1582-1590
• /
• 2019

A new method for reducing the common-mode current generated by the voltage variations in a two-inverter air conditioner system by applying a synchronized pulse-width modulation (PWM) strategy is proposed. The PWM signals of the master-mode inverter are generated based on the reference voltage, while those of the slave-mode inverter are output in the opposite direction when the master-mode inverter changes its switching state. However, the slave-mode control results in a mismatch between the reference voltage and the actual output voltage that is modified by synchronized control operation. The proposed method is capable of reducing and controlling this voltage error by performing signal selection in the vector space of the slave-mode inverter, which mitigates the distortion of the phase current. The efficacy of this method in reducing conducted emissions has been validated both theoretically and experimentally.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.346-351
• /
• 1998

In design of a digital current controller for a 3-phase (3 ) voltage-source (VS) PWM converter, its conventional model, i.e., stationary or synchronous reference frame model, is used in obtaining its discretized version. It introduces, however, inherent errors since the following practical problems are not taken into consideration: the characteristics of the space vector-based pulse-width modulation (SVPWM) and the time delays in the process of sampling and computation. In this paper, the new hybrid reference frame model of the 3 VS PWM converter is proposed considering these problems. In addition, the direct digital current controller based on this model is designed without any prediction or extrapolation algorithm to compensate the time delay. So the control algorithm is made very simple. It represents no steady-state error in input current control and has the optimized transient responses. The validity of the proposed algorithm is proved by the computer simulation and experimental results.

• The Journal of Korean Medical History
• /
• v.23 no.2
• /
• pp.43-46
• /
• 2010

Dong-Eui-Bo-Gam is a general medical literature, writing by Korea physician Xujun, who makes reference of Chinese medical literatures, Taoist literatures, historical records, Confucian literatures and so forth prior Ming Dynasty. It coveres many fields, such as medical theory, etiology, pulse theory, herb, prescription, internal medicine, surgery, gynecology, pediatrics, acupuncture, regimen, YunQi and so forth. Dong-Eui-Bo-Gam combines medical science and many others, using clustering arrangements, fully reflects Xujun's academic thoughts, and his rich clinical experiences.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.10a
• /
• pp.91-94
• /
• 1986

In this paper, a servo motor control IC for VTR is developed using standard cell library. All the cells are designed by single metal and the 3um design rule. A desinged circuit consists of circuits which generates a switching pulse and a control reference signal in VTR. The operation of VTR chip is verified by COSMOS simulator. Finally, layout is drawn by YOSELA.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.61-64
• /
• 1993

This study is aimed to analyze the influencing factor on the non-destructive testing by measuring rebound number of schmidt hammer and ultrasonic pulse velocity according to the variation of recycled aggregate kinds. And this study is to provide the reference data on application of practical use.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.986-989
• /
• 1988

The new controller which conststs of IBM-PC/AT, SBC, servo module and motor driver has been developed for KIMMBOT II robot. The servo module which controls two axes at the same time also has beendeveloped. This module inputs relative number of pulse and feedrate via multbus, after then outputs analog command voltage with reference to feedback pulses from the encoder of a motor. This system has a great flexibility. The reduction of parts gives more reliability.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.1-1
• /
• 2000

This paper presents a holography through high scatter mediums. Femtosecond light pulses are used as object light and reference light. When light passes through a high scatter medium, there are ballistic light, snake light and difussive light in transmitting light. However, ballistic and snake light are very weak, difussive light is very stronge so that they can not be imaged directly, By using femtosecond laser electronic holographic gating method to gate ballistic light and snake light and multi-holograms processing technology, high quality images can be obtained. (omitted)