• Journal of Positioning, Navigation, and Timing
• /
• 제11권2호
• /
• pp.83-89
• /
• 2022

For precise GNSS applications, the antenna phase center correction (PCC) is absolutely required. The PCC magnitude can reach the centimeter level with the antenna structure. In the present study, we first investigate the phase center offset (PCO) and phase center variation (PCO) of three different antenna models in two different reference frames, IGS08/igs08.atx and IGS14/igs14.atx. Clear L1 and L2 PCO differences were found between IGS08 and IGS14. In addition, the PCV showed characteristics that is dependent upon the signal direction (azimuth and elevation angle). The remarkable thing is that the changes of a Dorne Margolin choke-ring antenna model (AOAD/MT DOME) was very small in two reference frames. In order to analyze changes in positions according to different reference systems, GNSS data obtained from DAEJ, SUWN, and TSKB stations were processed by the precise point positioning (PPP) method. We suggest that an antenna PCO/PCV can affect the precise GNSS positioning on the order of several millimeters in two different reference frames.

• 전력전자학회논문지
• /
• 제14권2호
• /
• pp.112-119
• /
• 2009

본 논문은 홀센서를 사용하는 고속 소형 BLDCM의 속도제어를 위해 PLL 방식을 적용하였다. 제안된 방식은 기준펄스 신호와 홀센서 신호와의 위상차를 이용하는 PLL 기반의 속도제어 기법으로, 별도의 속도 계산이 요구되지 않고, 지령전류는 직접 두 신호의 위상차에 의해 결정된다. 전류 지령은 두 펄스 신호의 위상차에 따라서, 전동기의 속도를 일정하게 유지하기 위하여 변화된다. 제안된 방식은 매우 간단하지만 효과적인 속도 제어를 구현할 수 있다. 또한, 부드러운 토크를 발생하기 위하여 지령 전류는 가속 및 감속 패턴을 따라 변동하도록 설계되었다. 제안된 방식은 50W, 40,000[rpm]급의 소형 고속 BLDCM에 적용하여 실험하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.123-128
• /
• 2001

The creep constants which are used to the reference stress equations of creep damage were obtained to type 316LN stainless steel, and their determining methods were described in detail. Typical Kachanov and Rabotnov(K-R) creep damage model was modified into the damage equations with reference stress concepts, and the modified equations were applied practically to type 316LN stainless steel. In order to determine the reference stress value, a series of high-temperature tensile tests and creep tests were accomplished at $550^{\circ}C$ and $600^{\circ}C$. By using the experimental creep data, the creep constants used in reference stress equations could be obtained to type 316LN stainless steel, and a creep curve on rupture strain was predicted. The reference stress concept on creep damage can be utilized easily as a design tool to predict creep life because the process, which is quantified by the measurement of voids or micro cracks during creep, is omitted.

• 한국CDE학회논문집
• /
• 제19권4호
• /
• pp.390-401
• /
• 2014

ISO 15926 is an international standard for integration of lifecycle data for process plants including oil and gas facilities. From the viewpoint of information modeling, ISO 15926 Parts 2 provides the general data model that is designed to be used in conjunction with reference data. Reference data are standard instances that represent classes, objects, properties, and templates common to a number of users, process plants, or both. ISO 15926 Parts 4 and 7 provide the initial set of classes, objects, properties and the initial set of templates, respectively. User-defined reference data specific to companies or organizations are defined by inheriting from the initial reference data and the initial set of templates. In order to support the extension of reference data and templates, an editor that provides creation, deletion and modification functions of user-defined reference data is needed. In this study, an editor for reference data based on ISO 15926 was developed. Sample reference data were encoded in OWL (web ontology language) according to the specification of ISO 15926 Part 8. iRINGTools and dot15926Editor were benchmarked for the design of GUI (graphical user interface). Reference data search, creation, modification, and deletion functions were implemented with XML (extensible markup language) DOM (document object model), and SPARQL (SPARQL protocol and RDF query language).

• Entomological Research
• /
• 제48권5호
• /
• pp.390-399
• /
• 2018

In order to precisely assess gene expression levels, the suitable internal reference genes must be served to quantify real-time reverse transcription polymerase chain reaction (RT-qPCR) data. For armyworm, Mythimna separata, which reference genes are suitable for assessing the level of transcriptional expression of target genes have yet to be explored. In this study, eight common reference genes, including ${\beta}$-actin (${\beta}$-ACT), 18 s ribosomal (18S), 28S ribosomal (28S), glyceraldehyde-3-phosphate (GAPDH), elongation fator-alpha ($EF1{\alpha}$), TATA box binding protein (TBP), ribosomal protein L7 (RPL7), and alpha-tubulin (${\alpha}$-TUB) that in different developmental stages, tissues and insecticide treatments of M. separata were evaluated. To further explore whether these genes were suitable to serve as endogenous controls, three software-based approaches (geNorm, BestKeeper, and NormFinder), the delta Ct method, and one web-based comprehensive tool (RefFinder) were employed to analyze and rank the tested genes. The optimal number of reference genes was determined using the geNorm program, and the suitability of particular reference genes was empirically validated according to normalized HSP70, and MsepCYP321A10 gene expression data. We found that the most suitable reference genes for the different experimental conditions. For developmental stages, 28S/RPL7 were the optimal reference genes, both $RPL7/EF1{\alpha}$ were suitable for experiments of different tissues, whereas for insecticide treatments, $28S/{\alpha}-TUB$ were suitable for normalizations of expression data. In addition, $28S/{\alpha}-TUB$ were the suitable reference genes because they have the most stable expression among different developmental stages, tissues and insecticide treatments. Our work is the first report on reference gene selection in M. separata, and might serve as a precedent for future gene expression studies.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.192-201
• /
• 1997

The feedback control scheme of the pressure control system of the rear wheel steering gear which has relatively large volume and sprung load was built up in order to improve th response characteristic of the system. The control algorithm chosen was a feedback compensator joined by a feedfoward compensator and the model matching method was used in the process of control system design. The structures and properties of the reference models were inspected and the parameters of the controller were decided. The improvement of the response characteristic of the pressure control valve by means of the feedback control is affirmed. Particularly, when the order of the system model is higher than the 2nd order, the effectiveness of the feedback control on the improvement of the response characteristic of the valve is distinct. And the convenience of the model matching method is the process of control system design is confirmed as well.

• ETRI Journal
• /
• 제16권1호
• /
• pp.17-34
• /
• 1994

In this paper, we present an architecture of the constant false alarm rate (CFAR) detector called the generalized order statistics (GOS) CFAR detector, which covers various order statistics (OS) and cell-averaging (CA) CFAR detectors as special cases. For the proposed GOS CFAR detector, we obtain unified formulas for the false alarm and detection probabilities. By properly choosing coefficients of the GOS CFAR detector, one can utilize any combination of ordered samples to estimate the background noise level. Thus, if we use a reference window of size N, we can realize $(2^N-1)$ kinds of CFAR processors and obtain their performances from the unified formulas. Some examples are the CA, the OS, the censored mean level, and the trimmed mean CFAR detectors. As an application of the GOS CFAR detector to multiple target detection, we propose an algorithm called the adaptive mean level detector, which censors adaptively the interfering target returns in a reference window.

• 한국도서관정보학회지
• /
• 제25권
• /
• pp.569-593
• /
• 1996

The purpose of this study is to synthesize the theoretical systems concerning the necessity, methods, contents, and institutions of the continuing education for academic reference librarians in Korea, and to present a direction after performing a survey research to the librarians and grasping the phenomena on the basis of the system. The necessity, participation, contents, and performing institutions of continuing education were examined in detail, and the correlations among the sub-groups divided by gender, age, academic level of study, career as a librarian were analyzed. Also the direction of continuing education for reference librarians was presented on the basis of the analysis. On the basis of the analyzed contents, the following three methods for an ideal form to the continuing education of the reference librarians were presented in this thesis. 1) It is desirable that the continuing educations are performed at a professionalized institutions such as a library and information science department in a college and an education center for librarians which offers the Certificates of Advanced Study(CAS) as a librarian. 2) It is necessary to develop the various types of educational program in which a working reference librarian may take more chances to study during vacation, weekends, or in the evening time. 3) It is necessary to develop the proper educational contents that reference librarians want, and to educate the librarians in order for them to keep pace with the change of times.

• 한국재료학회지
• /
• 제16권2호
• /
• pp.129-136
• /
• 2006

In order to get basic information on the reference electrode material for the long life Al concentration sensor in zinc galvanizing melt, the workability and stability of fluorine potential cell with $CaF_2$ single crystal electrolyte were examined carefully at constant temperature for six kinds of reference materials (Zn, Sn, Cd, Bi, Pb, Al-Sn alloy + fluorides). Good workability and stability of the sensor were found in sensor with $Bi+BiF_3$ reference electrode. The Al sensor with $Bi+BiF_3$ reference electrode was assembled and was tested in Zn-Al melt with different Al concentration. The EMF was changed rapidly with the change of Al concentration and was stabilized in a short time. Thus the response of EMF was satisfactory for $CaF_2$ sensor. The correlationship between EMF from the sensor and logarithm of Al concentration has been derived from the least square regression method. E/mV=57.515log[wt% Al]+1883.3 R=0.9717 ($0.013{\leq}[wt% Al]{\leq}0.984$) The EMF from Al sensor was increased linearly against logarithm of [wt% Al]. The fluorine potential of Zn-Al melt was also calculated to be in the range of $10^{-60}{\sim}10^{-61}$ Pa for the present experiemental condition.

• 한국의류학회지
• /
• 제22권6호
• /
• pp.781-792
• /
• 1998

The purpose of this study was to investigate the factors related to the propensity for symbolic consumption and the effects of materialism, reference group, and social stratification on the symbolic consumption in clothing. Data were administered to 957 adolescence in middle, high school, and college student living in Seoul, Chonju, Sunchon, Yousu, and Kwangyang from May to June 1997. For analysis of the data, frequencies, percentage, means, standard deviation, factor analysis, 1-test, one-way anomia, duncan's multiple range test, and multiple regression analysis were employed. The results of this study can be summarized asfollows. 1) Symbolic consumption, materialism, and reference group were found to have the significant differences according to social stratification groups by objectivemethod. The higher social stratification is, the higher symbolic consumption, materialism, and reference group were. 2) symbolic consumption were proven to have the significant differences according to materiaiism and reference group. The higher materialism and the influence of referencegroup indicated, the higher symbolic consumption. 3)according to the results of the regression analysis examining the relative influences of variables affecting symbolic consumption in clothing, the relative importance of the variables are in order of : the influences of the reference group, materialism, social stratification, status inconsistency type (occupation-income), and their explanatory power totalled 40.0%.