• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.10
• /
• pp.1774-1779
• /
• 2016

This paper proposes a portable cable fault detection system with automatic fault distinction and distance measurement using time-frequency correlation and reference signal elimination method and automatic fault classification algorithm in order to have more accurate fault determination and location detection than conventional time domain refelectometry (TDR) system despite increased signal attenuation due to the long distance to cable fault location. The performance of the developed system method was validated via an experiment in the test field constructed for the standardized performance test of power cable fault location equipments. The performance evaluation showed that accuracy of the developed system is less than 1.34%. Also, an error of automatic fault type and location by detection of phase and peak value through elimination of the reference signal and normalization of correlation coefficient and automatic fault classification algorithm not occurred.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.8-13
• /
• 2001

In the turning process, the feed is usually selected by a machining operator considering workpiece, cutting tool and depth of cut. Even if this selection can avoid power saturation or tool breakage, it is usually conservative compared to the capacity of the machine tools and can reduce the productivity significantly. This paper proposes a selection method of the feed and the reference cutting force based on MRR(material removal rate), maximum spindle power and specific energy. In order to estimate and control cutting force accurately in transient and steady state, this study utilizes a synthesized cutting force estimation method and a Fuzzy controller. The experimental results present that these systems can be useful for the FMS(flexible manufacturing system) and unmanned automation system.

• The Journal of the Korean Society for Microbiology
• /
• v.22 no.1
• /
• pp.23-33
• /
• 1987

To detect lepotospiral strains which produce hemolysin and determine the optimal condition for assaying hemolysin, we screened reference strains and observed some property of hemolysin. Hemolysin activity was assayed with cell free culture liquids and erythrocyte suspension. The production of hemolysin by local strains isolated in Korea was assayed and compared with that of reference strains. The hemolysin was produced by 18 strains among 38 reference strains and 3 local strains isolated in Korea. The production of hemolysin began with growth of Leptospira cultured in EMJH medium and reached maximum at stationary phase. The optimum temperature for hemolytic activity was $37^{\circ}C$. At lower temperature the activity of hemolysin was decreased progressively. The hemolytic activity was completely inactivated after :30 minutes' exposure at $56^{\circ}C$. Hemolysis pattern was "hot-cold type" which showed increased hemolysis after cold incubation. The hemolysin was most active on sheep erythrocyte and less active on ox, goat, human and guinea pig erythrocyte with the decreasing order.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.183-187
• /
• 2007

This paper proposes Fuzzy Speed Estimator using Fuzzy Logic Controller(FLC) as a adaptive law in Model Reference Adaptive System(MRAS) in order to realize the speed-sensorless control of an induction motor. Fuzzy Speed Estimator estimates the speed of an induction motor with a rotor flux of the reference model and the adjustable model in MRAS. Fuzzy logic controller reduces the error of the rotor flux between the reference model and the adjustable model using the error and the change of error of the rotor flux as the input of FLC. The experiment is executed to verify the propriety and the effectiveness of the proposed speed estimator.

• Journal of Korean Medical classics
• /
• v.27 no.2
• /
• pp.119-135
• /
• 2014

Objectives : In order to research references on low back pain in Uihagimmun Methods : In respect of causes, symptoms and prescriptions for all kinds of low back pain, enlarging the range of references from books regarded as its references in Jiprye(集例) to books referred in Yeokdaeuihakseongssi(歷代醫學姓氏). Results : Beside of the books referred in Jiprye(集例) such as Seuideukhyobang(世醫得效方), Dangyesimbeop(丹溪心法), Okgimiui(玉機微義) and Injejikji(仁齋直指), the other reference books must be Sanghannon(傷寒論), Geumgweyoryak(金匱要略), Samingeugilbyeongbangjeungnon(三因 極一病證方論), Jebyeongwonhuron(諸病源候論), Jesaengbang(濟生方), Dongwonsihyobang(東 垣試效方), Maeginjeungchi(脈因證治), Bojebang(普濟方), Uihakjeongjeon(醫學正傳), Jeungchiyogyeol(證治要訣), Uihakgangmok(醫學綱目), Manbyeonghoechun(萬病回春), Gogeumuigam(古今醫鑑) and Susebowon(壽世保元) etc. Conclusions : Icheon(李梴), the author of Uihagimmun, referred not only to books mentioned in Jiprye but to books referred in Yeokdaeuihakseongssi. This book had important effect on making the contents of low back pain in Donguibogam(東醫寶鑑).

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.2
• /
• pp.31-35
• /
• 1985

This paper presents novel designs of a digital minimum-time controller and a digital adaptive controller using reference no del for single input-single out put linear time-invariant plants with known parameters. The proposed digital minimum-time controller which has a deadbeat response is designed to make the transfer function of this controller equal to that of reference model, and the proposed digital adaptive controller is designed by applying the adaptation method to the proposed digital minimum-time controller. The designs of these two controllers are very simple and easy, and all types of input signal with any reference models are controllable. These dffectivenesses have been demon-strated by computer simulations carried out for a third-order plant.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.421-428
• /
• 2004

Various type of welded joints of the ship structure have been examined numerically and experimentally under bending and tensional cyclic constant-amplitude loading. Cyclic loading on structures can produce failures not readily predicted by conventional static analysis. The aim of a benchmark study is achieved with a generalization of the reference stress concept. Also different methods and procedures exist for the computation of the welded structure hot-spot stress a welded joints. These are either based on the extrapolation of stresses at certain reference points on the plate surface (or edge) close to the weld toe-as known from experimental investigations- or on the linearization of stresses in the through-thickness direction. In the present paper, the different methods are reviewed and applied to four different details in order to compare the methods with each other and to illustrate the differences.

• 한국데이터정보과학회:학술대회논문집
• /
• 2005.10a
• /
• pp.71-84
• /
• 2005

The Fieller-Creasy problem involves statistical inference about the ratio of two independent normal means. It is difficult problem from either a frequentist or a likelihood perspective. As an alternatives, a Bayesian analysis with noninformative priors may provide a solution to this problem. In this paper, we extend the results of Yin and Ghosh (2001) to unbalanced sample case. We find various noninformative priors such as first and second order matching priors, reference and Jeffreys' priors. The posterior propriety under the proposed noninformative priors will be given. Using real data, we provide illustrative examples. Through simulation study, we compute the frequentist coverage probabilities for probability matching and reference priors. Some simulation results will be given.

• Speech Sciences
• /
• v.13 no.1
• /
• pp.117-128
• /
• 2006

The two-channel Generalized Sidelobe Canceller (GSC) scheme suffers from the presence of leakage signal in the reference channel. The leakage signal is caused by the dissimilar impulse responses between microphones, and different paths from speech source to microphones. Such leakage is detrimental to speech enhancement of the GSC since the desired reference signal becomes corrupted. In order to suppress the signal leakage, two matrix injection methods are proposed. In the first method, a simple gain compensation matrix is used. In the second, a projection matrix for reducing the error between the actual and the ideal primary and reference signals, is used. This paper describes the performance degradation resulting from leakage, and proposes effective methods to resolve the problem. Representative experiments were conducted to demonstrate the effectiveness of the proposed methods on recorded speech and noise in an actual automobile environment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1446-1452
• /
• 2002

In the turning process, the feed is usually selected by a machining operator considering workpiece, cutting tool and depth of cut. Even if this selection can avoid power saturation or tool breakage, it is usually conservative compared to the capacity of the machine tools and can reduce the productivity significantly. This paper proposes a selection method of the feed and the reference cutting force based on MRR(material removal rate), maximum spindle power and specific energy. In order to estimate and control cutting force accurately in transient and steady state, this study utilizes a synthesized cutting force estimation method and a Fuzzy controller. The experimental results show that these systems can be useful for the unmanned turning process.