• Imaging Science in Dentistry
• /
• 제49권2호
• /
• pp.159-169
• /
• 2019

Purpose: Cone-beam computed tomography (CBCT) is widely used for 3-dimensional assessments of cranio-maxillo-facial relationships, especially in patients undergoing orthognathic surgery. We have introduced, for reference in CBCT cephalometry, an anatomical mid-sagittal plane (MSP) identified by the nasion, the midpoint between the posterior clinoid processes of the sella turcica, and the basion. The MSP is an updated version of the median plane previously used at our institution for 2D posterior-anterior cephalometry. This study was conducted to test the accuracy of the CBCT measures compared to those obtained using standard posterior-anterior cephalometry. Materials and Methods: Two operators measured the inter-zygomatic distance on 15 CBCT scans using the MSP as a reference plane, and the CBCT measurements were compared with measurements made on patients' posterior-anterior cephalograms. The statistical analysis evaluated the absolute and percentage differences between the 3D and 2D measurements. Results: As demonstrated by the absolute mean difference (roughly 1 mm) and the percentage difference (less than 3%), the MSP showed good accuracy on CBCT compared to the 2D plane, especially for measurements of the left side. However, the CBCT measurements showed a high standard deviation, indicating major variability and low precision. Conclusion: The anatomical MSP can be used as a reliable reference plane for transverse measurements in 3D cephalometry in cases of symmetrical or asymmetrical malocclusion. In patients who suffer from distortions of the skull base, the identification of landmarks might be difficult and the MSP could be unreliable. Becoming familiar with the relevant software could reduce errors and improve reliability.

• 한국해양공학회지
• /
• 제22권4호
• /
• pp.106-113
• /
• 2008

This paper presents an underwater navigation system based on range measurements from a known reference station fixed on the sea bottom or floated at surface with a buoy, for which the system is extended to 3-dimensional coordinates. We formulated a state equation in polar coordinates and constituted an extended Kalman filter for discrete-time implementation of the navigation algorithm. The autonomous underwater vehicle, lSiMl, cruising with a constant speed can estimate its trajectory using just range measurements and additional depth, heading and pitch sensors. Simulation studies were performed to evaluate the underwater navigation of the maneuvering AUV with range measurements. We modulated the sample rate of range measurements to evaluate the effect of the update rate, and changed the initial position error of the AUV to check the robustness to estimation errors. Simulation results illustrates that the extended navigation system provides convergence of the state estimates. The navigation system was conditionally stable when it had initial position errors.

• 복식문화연구
• /
• 제16권2호
• /
• pp.278-292
• /
• 2008

The purpose of this study is to propose apparel sizing system for each body shape of early adolescent boys. The subjects of this study were 549 boys in the capital area. Their body shapes were classified based on 47 anthropometric measurements, 43 photographic measurements and 10 indexed measurements. The apparel sizing system was proposed for each body shape. For data analysis were performed descriptive statistics, correlation analysis and crosstabulation using SPSS Ver. 12. The control dimensions to propose apparel sizing system were stature and waist circumference for the lower garments. Intervals between sizes were 5cm for stature and irregular for waist circumference. For each type, $5{\sim}8$ sizes were proposed for lower garments. Reference measurements suggested fur lower garments were 7 items. This study is meaningful in that it proposed apparel sizing system for each type of body shape. The results of this study are expected to contribute to planning sizes according to the type of body shape and improving the fitness of ready-made clothes in apparel and school uniform manufacturers.

• 대한수학회지
• /
• 제58권1호
• /
• pp.1-28
• /
• 2021

We study a continuous data assimilation algorithm for the three-dimensional simplified Bardina model utilizing measurements of only two components of the velocity field. Under suitable conditions on the relaxation (nudging) parameter and the spatial mesh resolution, we obtain an asymptotic in time estimate of the difference between the approximating solution and the unknown reference solution corresponding to the measurements, in an appropriate norm, which shows exponential convergence up to zero.

• 복식문화연구
• /
• 제13권5호
• /
• pp.671-685
• /
• 2005

The purpose of this study was to develop a new size range and size interval for early adolescent girls. For this purpose, a total of 529 girls aged between 10 and 14 were measured and data were collected from 42 anthropometric measurements and 41 photographic measurements per a person. SAS 8.1 was used in data analysis including means, standard deviations, and frequency analysis. The stature was divided at 5cm intervals as in KS into 9 sizes from the lowest 130cm to the highest 171cm. If waist circumference were divided at the same intervals, the sizes cannot reflect the body growth of adolescent girls at these ages. Thus this study set intervals between sizes irregularly based on the mean of waist circumference by the type of body shape. Based on the results, this study proposed: for Type A - 6 sizes (140A-58, 145A-54, 145A-62, 150A-58, 150A-62, 155A-62); for Type X- 9 sizes (150X-59, 155X-63, 155X-66, 160X-59, 160X-63, 160X-66, 165X-59, 165X-63, 165X-66): and for Type H - 7 sizes (145H-68, 150H-68, 150H-70, 155H-68, 155H-73, 160H-68, 160H-73). For the sizes selected for each type, reference measurements were decided - centering on items necessary for manufacturing clothes. Reference measurements suggested for lower garments 8 items including waist circumference, hip circumference, slacks length and crotch length. The suggested sizes are distributed in a wider range, so they are considered to be helpful for students to find clothes fitting their bodies.

• Journal of Radiation Protection and Research
• /
• 제21권4호
• /
• pp.255-262
• /
• 1996

이 논문은 최근 한국원자력연구소(KAERI)와 미국 패시픽노스웨스트 국립연구소(일명, 바텔연구소, PNNL)이 개인선량계의 성능검사를 위한 미국 ANSI N13.11 기준에 근거하여 KAERI 방사선 측정/교정실험실에서 수행한 KAERI 기준 광자 및 베타 방사선장의 국제 상호비교 측정결과를 설명하고 있다. 두 기관이 각각 자국의 일차 표준에 소급성을 갖는 방사선 검출기와 방사선 측정장치를 사용하여 자유공기중에서 광자의 조사선량(율), 공기커마(율)와 베타선의 절대 흡수선량(율)을 측정한 결과, 광자선장에 대해서는 ${\pm}2.0%$을 베타선장에 대해서는${\pm}1.0%$의 오차범위 내에서 잘 일치하였다. 따라서 KAERI의 기준 광자 및 베타 방사선장은 국제표준에 잘 만족되고 있음이 입증되었으며 장차 방사선 도시메트리 연구개발의 국가 기술기반으로 활용될 수 있음이 확인되었다

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1723-1729
• /
• 2021

Energy and directional distribution of neutrons at the Beloyarsk NPP workplaces is a subject of this study. Measurements of H^*(10) rate and neutron energy distribution were taken at 8 workplaces, which can be divided into three categories: work with spent or fresh nuclear fuel, work with radionuclide neutron sources, work at the rooms adjusted to reactors. The Hp(10) measurements were performed only at 6 out of 8 locations, due to the fact that long term placing of an effective neutron moderator in fresh nuclear fuel storage facility is forbidden. As a result of the research energy and direction distribution of the neutron fields at 8 locations of the Beloyarsk NPP workplaces was obtained. To estimate the accuracy of the H^*(10) rate and Hp (10) measurements the reference values of dose equivalents were calculated using energy and directional distribution. To take into account the difference between the reference values and the measured results site-specific correction factors were calculated.

• 대한원격탐사학회지
• /
• 제19권1호
• /
• pp.1-9
• /
• 2003

MODIS LAI product has been one of key variable for analyzing the quantitative aspects of terrestrial ecology at global scale. This study was designed to validate MODIS global LAI product for regional application. To examine the quality of MODIS LAI data, we developed a reference LAI surface that was derived by relating the ground LAI measurements to Landsat ETM+ reflectance. The study area, the Kwangneung Experiment Forest in Korea, covers mixed deciduous and coniferous species of temperate forest. Ground measurements of LAI were conducted at 30 sample plots by using a photo-optical instrument during the growing season of 2002. Ground measured LAI data were then related to the ETM+ reflectance to produce a continuous map of LAI surface over the study area. From the comparison between the MODIS LAI and the reference LAI, it was found that the MODIS LAI values were slightly higher at the forestland. Considering the limitations of producing the reference LAI surface and the uncertainty of the input variable for the MODIS LAI algorithm, such small discrepancy mal not be significant.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(4)
• /
• pp.34-39
• /
• 1996

A series of measurements was peformed between KAERI and PNNL, U.S.A at KAERI secondary calibration laboratory to intercompare and verify the KAERI reference photon radiation fields by using air equivalent plastic walled ionization chambers, Different ionization chambers of two laboratories were used to determine the air kerma rate, free-in-air, at reference positions in the KAERI photon radiation fields, As the results, the agreement in the cross measurements between two laboratories was found to be within less than ${\pm}$ 3 %. This degree of consistency was considered to be encouraging, because each laboratory maintains independently its calibration traceablity with its national primary standard

• Corrosion Science and Technology
• /
• 제16권5호
• /
• pp.227-234
• /
• 2017

Reference electrodes are generally implemented for the purpose of monitoring the cathodic protection potentials of buried or immersed metallic structures. In the market, many types of reference electrodes are available for this purpose, such as saturated calomel, silver/silver chloride and copper/copper sulfate. These electrodes contain a porous ceramic junction plate situated in the cylindrical body bottom to permit ionic flux between the internal electrolyte (of the reference electrode) and the external electrolyte. In this work, the copper/copper sulfate reference electrode was modified by replacing the porous ceramic junction plate for a metallic platinum wire. The main purpose of this modification was to avoid the ion copper transport from coming from the inner reference electrode solution into the surrounding electrolyte, and to mitigate the copper plating on the coupon surfaces. Lab tests were performed in order to compare the performance of the two mentioned reference electrodes. We verified that the experimental errors associated with the measurements conducted with developed reference electrode would be negligible, as the platinum surface area exposed to the surrounding electrolyte and/or to the reference electrolyte are maintained as small as possible.