• Journal of Periodontal and Implant Science
• /
• v.44 no.2
• /
• pp.50-56
• /
• 2014

Purpose: The aims of this study were to measure the distance of the intraosseous vascular anastomosis in the anterolateral wall of the maxillary sinus from different reference points, and to correlate the location of the intraosseous vascular anastomosis with the tooth position and the residual bone height of the maxilla. Methods: Computed tomography (CT) images were taken from 283 patients undergoing dental implants placement in the posterior maxilla. Three horizontal lines were drawn at the ridge crest, maxillary sinus floor, and the position of the anastomosis. A vertical second line at the center of each tooth was drawn perpendicular to the horizontal lines. The distance from the ridge crest to the maxillary sinus floor and the distance from the maxillary sinus floor to the bony canal were measured from the intersections of the horizontal and vertical lines. The residual alveolar bone height was used to categorize three groups: group 1,<4 mm; group 2, between 4 and 8 mm; and group 3, >8 mm. Results: The residual bone height values of different tooth positions were significantly different (P=0.0002). The distance from the maxillary sinus floor to the intraosseous vascular anastomosis was significantly different between groups 1 and 3 (P=0.0039). At the molar sites, a moderate negative correlation was found between the residual bone height and the distance from the maxillary sinus floor to the intraosseous anastomosis. The distances of the alveolar ridge crest and the maxillary sinus from the intraosseous vascular anastomosis were not significantly different between sexes. Conclusions: Within the limitations of this study, sites with a higher residual bone height in the molar regions were at a relatively high risk of artery damage during window osteotomy preparation; therefore, we recommend taking more precautions when using a lateral approach for sinus elevation.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.233-240
• /
• 2017

In recent years, graphics authoring tools have evolved into a variety of formats in line with the rapidly changing digital design field. However, in the field of interface design, screen shape and size depending on the user's environment, it needs more flexible and scalable authoring tools. Along with the emergence of variety of new tools, work processes are also changing. This study investigates what kinds of graphic authoring tools are currently used by designers and compared the result to the case of overseas and examined the difference in the environment of graphic authoring tool. This study looked at criteria and satisfaction of designers choosing authoring tools and how the choice depends on the type of company we are working in and the type of project we are involved in. Research shows that the choice of authoring tools depends on the type and efficiency of the project. Based on this, a reference is provided to establish the standard and working environment for designers and companies to select graphic authoring tools and propose the future direction of graphic authoring tool environments.

• Journal of the Korean Ceramic Society
• /
• v.39 no.6
• /
• pp.540-549
• /
• 2002

In this work, the hydration behaviour of portland cement pastes containing fly ash, blast-furnace slag and silica fume is investigated by Impedance Spectroscopy(IS). As fly ash or blast-furnace slag was added to portland cement, the values of R$_{t(s+1)}$ and R$_{t(s+1)}$ were decreased in the early hydration period. It showed that hydration of cement containing blending components was slower than it of the reference cement paste with the same W/C ratio. However, the cement paste containing silica fume had a large value of R$_{t(s+1)}$ and R$_{t(int)}$due to very rapid pozzolanic reactivity of silica fume in the hydration time. In OPC-fly ash system, a characteristic plateau region appeared between straight-line and semicircle. The plateau region continued to grow in range with the content of fly ash and the hydration time.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.12-17
• /
• 2005

The segment matching method shows better performance than the global and points-based methods to compare reference signature with an input signature. However, the segment-to-segment matching method has the problem of decreasing recognition rate according to the variation of partitioning points. This paper proposes a fusion model based on the segment matching and HMM to construct a more reliable authentic system. First, a segment matching classifier is designed by conventional technique to calculate matching values lot dynamic information of signatures. And also, a novel HMM classifier is constructed by using the principal component analysis to calculate matching values for static information of signatures. Finally, SVM classifier is adopted to effectively combine two independent classifiers. From the various experiments, we find that the proposed method shows better performance than the conventional segment matching method.

• The korean journal of orthodontics
• /
• v.48 no.1
• /
• pp.23-29
• /
• 2018

Objective: In accordance with the changing demographics in the United States, orthodontists working on various ethnic populations should be more conscious when using the standardized profile analyses for the African American patient. The objective of this study was to examine whether the perception of lip protrusiveness in modern African American faces has changed. For this purpose, we investigated the most favorable African American lip profile using the opinions of 10 experienced and 10 newly trained younger orthodontists. Methods: Attractiveness was converted to a number on visualized analog scales. Comparative ranks on 16 African American profiles, with focus on lip protrusiveness and thickness, were made among the groups. Mixed-effects linear regression models were fit and group differences were estimated. Results: Younger orthodontists favored a more protrusive lip profile, and the variance in their perceptions was narrower than those of older orthodontists. Measurements related to upper lip protrusion showed the strongest correlation to attractiveness (r = -0.82). The association with attractiveness decreased linearly as the protrusiveness of the upper lip increased. Steiner's E-line was the most influential reference for determining the level of attractiveness for the older orthodontists, whereas upper lip protrusion was the most influential factor for the young orthodontists. Conclusions: An adequate level of lip protrusiveness and thickness should be essential for maintaining attractive esthetics in African American patients. Yet, a new set of standards for prominent lips in this population is necessary to reflect the current trend in the concept of a beautiful face in the modern world.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.152-161
• /
• 2017

The CBTC(Communication based Train Control) system employed on 2.4GHz ISM band adopt the IEEE802.11.x standard. Therefor communication time delay, distortion and data losses will be produced. To overcome these problems, CPSK(Continuous Phase shift keying) modulated DS/SS(Direct Sequence Spread Spectrum) transmitter with 908MHz carrier frequency is proposed. Through the eye diagram and scatter diagram the performance is analysed. And the phase noise characteristic of the local oscillator is measured about 60dBc/Hz, this means that the phase noise performance is very good compared to the signal. Reference frequency suppression of the 2nd local oscillator is 50dB below compared to the signal. Through the polarities of the complementary signal equally probable, the line spectrum of the output spectrum is eliminated. The nonlinear effects which introduce the spectral spreading or spectral regeneration is reduced remarkably.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2405-2412
• /
• 2000

A cast stainless steel may experience an embrittlement when it is exposed to approximately 30$0^{\circ}C$ for long period. In the present investigation, The three classes of the thermally aged CF8M specimie n are prepared using an artificially accelerated aging method. Namely, after the specimen are held for 300, 1800 and 3600hrs. at 43$0^{\circ}C$ respectively, the specimens are quenched in water to room temperature. Load versus load line displacement curves and J-R curves are obtained using the unloading compliance method. $J_{IC}$ values are obtained following ASTM E 813-87 and ASTM E 813-81 methods. In addition to these methods, JIC values are obtained using SZW(stretch zone width) method described in JSME S 001-1981. The results of the unloading compliance method are $J_Q$=485.7 kJ/m$^2$ for virgin material, $J_{IC}$ of the degraded materials associated with 300, 1800 and 3600hrs are obtained 369.25 kJ/m$^2$, 311.02 kJ/m$^2$, 276.7 kJ/m$^2$, respectively. The results of SZW method are similar to those of the unloading compliance method. Through the elastic-plastic fracture toughness test, it is found that the value of $J_{IC}$ is decreased with increasing of the aging time. The results obtained through the investigation can provide reference data for a leak before break(LBB) of reactor coolant system of nuclear power plants.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.4
• /
• pp.1757-1762
• /
• 2014

Development of drugs from natural products has been undergoing a gradual evoluation. Many plant derived compounds have excellent therapeutic potential against various human ailments. They are important sources especially for anticancer agents. A number of promising new agents are in clinical development based on their selective molecular targets in the field of oncology. D-pinitol is a naturally occurring compound derived from soy which has significant pharmacological activitites. Therefore we selected D-pinitol in order to evaluate apoptotic potential in the MCF-7 cell line. Human breast cancer cells were treated with different concentrations of D-pinitol and cytotoxicity was measured by MTT and LDH assays. The mechanism of apoptosis was studied with reference to expression of p53, Bcl-2, Bax and NF-kB proteins. The results revealed that D-pinitol significantly inhibited the proliferation of MCF-7 cells in a concentration-dependent manner, while upregulating the expression of p53, Bax and down regulating Bcl-2 and NF-kB. Thus the results obtained in this study clearly vindicated that D-pinitol induces apotosis in MCF-7 cells through regulation of proteins of pro- and anti-apoptotic cascades.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.239-244
• /
• 2013

This paper presents a design of the CMOS LDO regulator with a UVLO protection function for a high speed PMIC. Proposed LDO regulator circuit consists of a BGR reference circuit, an error amplifier and a power transistor and so on. UVLO block between the power transistor and the power supply is added for a low input protection function. Also, UVLO block showed normal operation with turn-off voltage of 2.7V and turn-on voltage of 4 V in condition of 5 V power supply. Proposed circuit generated fixed 3.3 V from a supply of 5V. From SPICE simulation results using a $1{\mu}m$ high voltage CMOS technology, simulation results were 5.88 mV/V line regulation and 27.5 uV/mA load regulation with load current 0 mA to 200 mA.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.569-574
• /
• 2004

We stabilized the frequency and power of a CW radio-frequency-excited $CO_2$ laser on the peak of the Doppler broadened gain curve using the photoacoustic effect generated from the laser itself. The condenser microphone is installed in the radio frequency discharge chamber to detect a photoacoustic signal. The photoacoustic signal is fed to a lock-in stabilizer as a reference signal for stabilization. The frequency stability is estimated to be better then 5.4${\times}$10$^{-8}$ at the P(20) line. The stabilized output variation was reduced 9.3%, compared to 100% for a free running laser.