• 한국지열·수열에너지학회논문집
• /
• 제19권1호
• /
• pp.1-13
• /
• 2023

Many government in the world have conducted building energy performance certification program to reduce building energy consumption. In this study, a reference building and its HVAC system was modeled, and the energy load and consumption were estimated by the ECO2 program. The software is a simple building energy simulation program based on monthly calculated method. The building energy efficiency rating the the reference building was 1+ under baseline condition. The simulation results showed that the insulation performance slightly affected building energy load and consumption, but light density had a significant effect on them. The application of geothermal heat pumps gave improvement of building energy efficiency rating but it could not make it possible to get zero energy building(ZEB) certification. The ZEB 5 certification could be achieved by using photovoltaics, however getting better grade was difficult. The simulation results showed that the ZEB 4 certification, one grade higher than ZEB 5, could be attained by using more than one renewable energy source such as geothermal and solar energy in this study.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2008년도 학술논문요약집
• /
• pp.243-244
• /
• 2008

• 한국전산구조공학회논문집
• /
• 제27권5호
• /
• pp.437-450
• /
• 2014

원전의 항공기 충돌 리스크 평가에 사용되는 대표매개변수를 선정하기 위한 방법론을 개발하였다. 대상 원전은 국내의 대표적인 경수로형 원전 중 하나로 선정하여 3차원 유한요소 해석 모델을 구축하였다. 콘크리트 재료모델에는 소성손상모델이 적용되었으며, 강재는 다중선형곡선거동을 가지는 것으로 모델링하였다. 운동에너지, 전체 충격량, 최대 충격량, 최대 하중등 4종의 대표매개변수 후보군을 선정하였다. 각각의 매개변수 후보군은 모두 충돌 속도와 질량의 함수로 표현되므로, 충돌속도 50~200m/s, 항공유량 30~90%의 범위에 대하여 매개변수값을 도출하고 충돌 해석을 수행하여, 충돌 시의 구조 응답과의 상관관계를 분석하였다. 모든 해석에서 항공기의 기종은 보잉767 기종으로 선정하였다. 충돌해석에는 Riera의 하중-시간 이력 함수를 이용한 해석기법을 적용하였다. 매개변수와 충돌 시 응답의 상관관계 적합성은 결정계수값을 이용하여 분석하였다. 4 종의 대표매개변수 후보군 중 최대 하중값이 가장 직관적일 뿐만 아니라 본 연구에서의 해석 케이스에서는 응답과의 상관성도 가장 뛰어난 것으로 나타남에 따라, 항공기충돌 리스크 평가를 위하여 가장 적합한 매개변수라 할 수 있을 것으로 판단되었다.

• 방사성폐기물학회지
• /
• 제13권3호
• /
• pp.201-209
• /
• 2015

우리나라에서는 현재 23기의 원자력발전소를 운영 중에 있으며, 이들 원자력발전소로부터 발생하는 사용후핵연료를 처분대상으로 기준 심지층 처분시스템을 개발한 바 있다. 현재 이 기준 심지층 처분시스템은 초기농축도 4.5wt%, 방출연소도 55 GWd/MtU의 40 년 냉각된 사용후핵연료를 기준으로 하고 있다. 본 논문에서는 처분효율 및 경제성 향상 방안의 일환으로서 사용후핵연료의 종류 및 연소도 특성 등 발생특성을 검토하였다. 그리고 기준 사용후핵연료에 비하여 길이가 짧고 연소도가 비교적 낮은 사용후핵연료에 대한 처분용기 개념을 도출하고 열해석을 수행하여 처분시스템 개념을 제시하였다. 또한, 이 처분시스템 개념과 기준 사용후핵연료 처분시스템 개념을 처분밀도, 처분면적 등의 처분효율 및 구리와 벤토나이트 소요량 등 경제성 관점에서 비교 분석한 결과 약 20% 이상 향상을 보이는 것을 확인하였다. 본 분석결과는 사용후핵연료 관리정책 수립 및 실제 처분시스템 설계에 활용될 수 있을 것으로 사료된다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제26권3호
• /
• pp.37-49
• /
• 2021

There is domestic Soil Contamination Warning Standard (SCWS) as remediation standard concentration of contaminated soils. No risk should be observed at soil concentration less than SCWS. Therefore, SCWS was evaluated to confirm the risk assessment. Background Concentration of Soil (BGC) and target remediation concentration were also assessed. The results show that Excess Cancer Risk (ECR) of SCWS was the highest in the groundwater intake pathway (Adult: 6.27E-04, Child: 2.81E-04). Total Cancer Risk (TCR) was 7.76E-04 and 4.30E-04 for adult and child, exceeding reference value (10^-6). Hazard Quotient (Non-Carcinogenic Risk, HQ) was the highest in the indoor air inhalation pathway (Adult: 3.64E+03, Child: 8.74E+02). Hazard Index (Total Non-Carcinogenic Risk, HI) exceeded reference value 1. ECR of the BGC was the highest in the groundwater intake pathway (Adult: 1.71E-04, Child: 7.67E-05). TCR was 2.12E-04 for adults and 1.17E-04 for children, exceeding the reference value (10^-6). HQ was the highest in groundwater intake pathway (Adult: 4.10E-01, Child: 1.84E-01). HI was lower than reference value 1 (Adult: 4.78E-01, Child: 2.50E-01). The heavy metal affecting ECR was Arsenic (As). The remediation-concentration of As was 7.14 mg/kg which is higher than BGC (6.83 mg/kg). TCR of As should be less than reference value (10^-6), but it was higher for all of SCWS, BGC and target remediation concentration. Therefore, it is suggested that risk assessment factors should be re-evaluated to fit domestic environmental settings and SCWS should be induced to satisfy the risk assessment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.14-20
• /
• 1997

Due to several advantages of Pulse Width Modulated(PWM) Converter, such as unity power factor with low-harmonics and energy regeneration, PWM converter has been widely used in industrial application. In every application of energy conversion equipment, the design and implementation must be carried out considering performance and cost. High quality with low cost is the best choice for energy conversion equipment. High dc link voltage can reduce inverter and motor side losses and system dimension compare to low dc link voltage. Analog controller can make PWM converter cheaper without considerable degradation of the performance than digital controller. This paper shows the simplified analog controller-for 600V dc link voltage using stationary reference frame control and the simulation results.

• 한국태양에너지학회 논문집
• /
• 제21권4호
• /
• pp.13-20
• /
• 2001

The purpose of this study is to analyze the effect of Super-insulation for self-sufficient house. The process of the study is presented in the following. 1) selection reference model for simulation and verification of reference model with computer simulation program(DOE2.1E and ESP-r 9.0). 2) analysis of effect according to insulation-thickness, installed insulation position, kinds of windows, rate of infiltration, Finally, the results of this study will be to provide the most reasonable method concerned with self-sufficient house.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.182-190
• /
• 2004

An unique extraction chromatographic column (TOA: Tri-n-octylamine on Teflon powder) with a two-stage sample loading was prepared to separate Np and Pu from the environmental matrix. Np and Pu were efficiently retained in 4 M $HNO_3$ medium on the column and easily eluted with 0.02 M oxalic acid in 0.16 M HNO$_3$at $95^{\circ}C$. The separated solutions were free from most of the matrix elements and were aspirated into the ICP-MS directly. The decontamination factor for 238U is more than 104. The instrumental detection limit for 237Np was 0.46 pg mL-l ($1.2{\times}10_{-5}$Bq mL-l), and for 239Pu was 0.48 pg mL-l ($1.1{\times}10_{-3}$ Bq mL-l). The feasibility for the determination of both elements was proved by analysing IAEA-135 reference samples, the measured values agreed with the recommended reference value.

• Journal of Radiation Protection and Research
• /
• 제29권1호
• /
• pp.49-55
• /
• 2004

This paper presents the mechanical and thermal stress analysis of a disposal canister to provide basic information for dimensioning the canister and configuration of the canister components. The structural stress analysis is carried out using a finite element analysis code, NISA, and focused on the structural strength of the canister against the expected external pressures due to the swelling of the bentonite buffer and the hydrostatic head, and the thermal load build up in the container.

• Coupled systems mechanics
• /
• 제6권3호
• /
• pp.369-376
• /
• 2017

Intermolecular interaction energies and conformer geometries of the hydrogen bonded acrylamide dimers have been studied by using the second-order Møller-Plesset (MP2) perturbation theory and the density functional theory (DFT) with 17 density functionals. Dunning's correlation consistent basis sets (up to aug-cc-pVTZ) have been used to study the basis set effects. The DFT calculated interaction energies are compared to the reference energy data calculated by the MP2 method and the coupled cluster method at the complete basis set (CCSD(T)/CBS) limit in order to determine the relative performance of the studied density functionals. Overall, dispersion-energy-corrected density functionals outperform uncorrected ones. The ${\omega}B97XD$ density functional is particularly effective in terms of both accuracy and computational cost in estimating the reference energy values using small basis sets and is highly recommended for similar calculations for larger systems.