• 대한화학회지
• /
• 제29권2호
• /
• pp.137-143
• /
• 1985

액체막형 구리이온 선택성 전극의 제작과 전위차적정에의 응용을 연구하였다. 액체 이온교환막은 수용액속의 Cu(II)을 1-(2-pyridylazo)-2-naphthol/nitrobenzene 용액 속으로 추출하여 만들었다. 액체 이온교환막 위에 HAc-NaAc 용액으로 완충된 $1.00 {\times} 10^{-3}M\;Cu(NO_3)_2$ 용액을 채우고 Ag/AgCl 내부 기준전극을 담그었다. 이 이온선택성 전극은 $1.00 {\times} 10^{-6}$ ~ $1.00 {\times} 10^{-3}$M Cu(II) 농도 범위에서 nerstian response를 보여주었다. 가장 적절한 이온교환체의 농도는 $1.00 {\times} 10^{-4}$M이었다. 여러가지 금속이온에 대한 이온선택성 전극의 선택계수를 측정하였다. EDTA를 적정제로 하여 Cu(II)에 대한 전위차적정에 응용하였다.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2003년도 연료전지심포지움 2003논문집
• /
• pp.75-78
• /
• 2003

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.909-912
• /
• 2000

We synthesized polypyrrole (PPy) nanotubules by oxidative polymerization of the pyrrole monomer within the pores of a polycarbonate template. The electrochemical behavior was investigated using cyclic voltammetry. The redox potential was about -0.5 V vs. Ag/AgCl reference electrode, while the potential was about 0 V for PPy film. It is considered as the backbone grows according to the pore wall. Therefore, it is possible to be arranged regularly. That leads to improvement in the electron hopping. By electrochemical doping of glucose oxidase (GOx) on PPy nanotubules, an enzyme electrode has been fabricated. The kinetic parameter of biochemical reaction with glucose was evaluated. The formal Michaelis constant and maximum current calculated by computer were about 11.4 mmol $dm^3$ and 170.85 A respectively. Obviously, an affinity for the substrate and current response of the PPy nanotubules enzyme electrode are rather good, comparing with that of PPy film.

• 한국재료학회지
• /
• 제28권6호
• /
• pp.330-336
• /
• 2018

In this study, a membrane electrode assembly(MEA) composed of three electrodes(anode, cathode, and reference electrode) is designed to investigate the effects of methanol concentration on the overpotentials of anode and cathode in direct methanol fuel cells(DMFCs). Using the three-electrode cell, in-situ analyses of the overpotentials are carried out during direct methanol fuel cell operation. It is demonstrated that the three-electrode cell can work effectively in transient state operating condition as well as in steady-state condition, and the anode and cathode exhibit different overpotential curves depending on the concentration of methanol used as fuel. Therefore, from the real-time separation of the anode and cathode overpotentials, it is possible to more clearly prove the methanol crossover effect, and it is expected that in-situ analysis using the three-electrode cell will provide an opportunity to obtain more diverse results in the area of fuel cell research.

• Korean Chemical Engineering Research
• /
• 제54권6호
• /
• pp.817-821
• /
• 2016

Levodopa or L-3,4-dihydroxyphenylalanine (L-DOPA) is the direct precursor of the neurotransmitter dopamine. L-DOPA is a well-known neuroprotective agent for the treatment of Parkinson's disease symptoms. L-DOPA was synthesized using the enzyme, tyrosinase, as a biocatalyst for the conversion of L-tyrosine to L-DOPA and an electrochemical method for reducing L-DOPAquinone, the product resulting from enzymatic synthesis, to L-DOPA. In this study, three electrode systems were used: A glassy carbon electrode (GCE) as working electrode, a platinum, and a Ag/AgCl electrode as auxiliary and reference electrodes, respectively. GCE has been modified using electropolymerization of pyrrole to facilitate the electron transfer process and immobilize tyrosinase. Optimum conditions for the electropolymerization modified electrode were a temperature of $30^{\circ}C$ and a pH of 7 producing L-DOPA concentration 0.315 mM. After 40 days, the relative activity of an enzyme for electropolymerization remained 38.6%, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.721-724
• /
• 2009

In this paper, we proposed fence electrode structures. The experimental structures change cross-bar length as 145, 105, 65 and $30{\mu}m$ to improve the electro-optical characteristics. The proposed structures improve the addressing time and luminous efficacy compared with the T145 structure which has the cross-bar length of $145{\mu}m$ as the reference. Especially, in the case of the T30 structure with cross-bar length of $30{\mu}m$, it gains lower power consumption by 34%, and higher luminous efficacy by 20% than those of the reference structure.

• 전기화학회지
• /
• 제4권3호
• /
• pp.125-131
• /
• 2001

용융탄산염 연료전지의 장기 운전시 각 전극별 분극의 변화를 Au, $CO_2/O_2$ 기준전극이 부착된 단위전지를 이용하여 성공적으로 해석하였다. 서로 다른 구성요소로 조합된 네 가지 단위 전지를 운전하며 각 전극의 분극을 해석한 결과, 이미 알려진 바와 같이 공기극의 분극 크기가 연료극의 경우보다 큰 것을 실험적으로 측정할 수 있었다. 고온 부식 방지를 위해 cell frame의 wet seal부분에 Al코팅을 한 전지는 6,000시간까지 성능을 유지하여 부식이 전지 성능 저하에 큰 역할을 하고 있음을 알 수 있었다. 한편, $LiCoO_2$가 코팅된 안정화 공기극은 일반적으로 사용되는 NiO 공기극보다 lithiation에 필요한 시간이 길어 운전 초기에 공기극 분극이 크고 성능이 낮았으나 지속적인 운전으로 공기극이 충분히 lithiation되면서 공기극의 분극이 작아지고 성능도 점차 증가하였다. $Li_2CO_3/Na_2CO_3$ 전해질을 사용한 전지는 운전 중 성능이 하락과 상승을 반복하는 진동현상을 보였는데 이는 연료극보다는 공기극의 영향으로 해석되었다. 대부분의 단위전지들이 급격한 성능 하락을 보였을 경우의 공기극 분극은 급격히 증가하였으며 이로써 용융탄산염 연료전지의 수명 향상을 위해서는 공기극의 개선이 필수적이라는 것을 알 수 있었다.

• 전자공학회논문지D
• /
• 제35D권4호
• /
• pp.78-83
• /
• 1998

A small size cartrideg for FET type electrolyte sensor is designed and faricated with much simplified process by using micromachining tenchiques such as silicon etching andglass bonding. Size of the whole cartideg is 2.4cm*2.5cm, and the dead volume of a micro flow-channel in the cartrideg is only 8.5.mu.l. The photosensitive polymer(THB 30) is used to define a micropool and to encapsulate the sensor surface for standardizationof electrolyte sensors. To miniaturize micro flow-channel conventional reference electrode(Ag/AgCl) a differential amplification is introduced using REFET and quasi reference electrode. Refet was fabricated using photosensitive polymer(OMR 83). The fabricated cartridge with built-in pH-ISFET showed good operational characteristics such as linearity and high sensitivity (55.4mV/pH) in a wide pH range(pH2-pH12).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.356-359
• /
• 1988

An FET type urea sensing device has been developed using the ISFET and platinum reference electrode and by employing the differential amplification. The performance characteristics of the fabricated sensor show a good linearity in the urea concentration range of $5{\times}10^{-5}$ to $10^{-3}$g/ml and a stable response.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.43-46
• /
• 2002

We have investgated the photoisomerization using light irradiation 8A5H-phospholipid( L-$\alpha$-dimyristoylphosphatidylcholine[DMPC], L-$\alpha$-dilauroylphosphatidylcholine[DLPC]mixture LB film accumulated by monolayer on an ITO. We determined electrochemical measurement by using cyclic voltammetry with a three-electrode system, An Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode measured in $NaClO_{4}$ solution at a variable concentration and variable number layers LB film. The scan rate was 100mV/s.