• 제목/요약/키워드: reference burst

검색결과 43건 처리시간 0.017초

사출성능 개선을 위한 사출용 가스발생기 연구 (Research on the Ejection Gas Generator to Improve Ejecting Performance)

  • 오석진;장승교;차홍석
    • 한국항공우주학회지
    • /
    • 제41권5호
    • /
    • pp.383-390
    • /
    • 2013
  • 유도탄의 사출성능 중 탄에 충격으로 작용하는 최대가속도의 감소는 유도탄의 비정상작동 방지와 내부 부품들의 크기 및 비용 감소 측면에서 매우 중요하다. 본 연구에서는 사출용 가스발생기의 작동에 의해 탄에 가해지는 최대가속도가 사출초기에 발생됨을 착안하여 사출초기에 영향을 미치는 설계인자를 조사하였다. 가스발생기 설계인자로 점화기 및 노즐마개를 선정하고, 설계인자 변경을 통해 가스발생기에 의해 발생되는 최대가속도를 실험적으로 조사하였다. 최종적으로 최대가속도 감소효과를 정량적으로 비교하기 위해 가스발생기 지상연소시험을 실시하였다. 그 결과 설계인자의 최적값들이 적용된 개선모델의 경우 기준모델에 비해 최대가속도를 약 68% 줄일 수 있음을 확인하였다.

Edge Computing-based Differential Positioning Method for BeiDou Navigation Satellite System

  • Wang, Lina;Li, Linlin;Qiu, Rui
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제13권1호
    • /
    • pp.69-85
    • /
    • 2019
  • BeiDou navigation satellite system (BDS) is one of the four main types of global navigation satellite systems. The current system has been widely used by the military and by the aerospace, transportation, and marine fields, among others. However, challenges still remain in the BeiDou system, which requires rapid responses for delay-sensitive devices. A differential positioning algorithm called the data center-based differential positioning (DCDP) method is widely used to avoid the influence of errors. In this method, the positioning information of multiple base stations is uploaded to the data center, and the positioning errors are calculated uniformly by the data center based on the minimum variance or a weighted average algorithm. However, the DCDP method has high delay and overload risk. To solve these problems, this paper introduces edge computing to relieve pressure on the data center. Instead of transmitting the positioning information to the data center, a novel method called edge computing-based differential positioning (ECDP) chooses the nearest reference station to perform edge computing and transmits the difference value to the mobile receiver directly. Simulation results and experiments demonstrate that the performance of the ECDP outperforms that of the DCDP method. The delay of the ECDP method is about 500ms less than that of the DCDP method. Moreover, in the range of allowable burst error, the median of the positioning accuracy of the ECDP method is 0.7923m while that of the DCDP method is 0.8028m.

KT의 Ntopia가입자 망 트래픽 분석 및 모델링 (Analysis and Modeling of Traffic at Ntopia Subscriber Network of Korea Telecom)

  • 주성돈;이채우
    • 대한전자공학회논문지TC
    • /
    • 제41권5호
    • /
    • pp.37-45
    • /
    • 2004
  • 인터넷이 발전하면서 이전에 존재하던 응용프로그램과는 다른 새로운 응용프로그램들이 등장하고 있으며, 이에 따라 트래픽의 특징 또한 변하고 있다. 그 결과 새로운 응용프로그램이 네트워크 성능에 미치는 영향도 변하고 있다. 현재 널리 사용되고 있는 P2P(Peer to Peer) 응용프로그램이 발생시키는 트래픽은 기존의 웹(HTTP)이나 FTP(File Transfer Protocol) 응용프로그램의 트래픽과 다른 통계적 특징을 보여주고 있다. 본 논문은 P2P 트래픽의 특징을 분석하기 위해 KT(Korea Telecom)의 가입자망 트래픽을 측정하였다. 측정된 트래픽을 플로우별로 분석을 하고, P2P 트래픽의 자기 유사성을 측정하고 웹 트래픽과 비교하였다. 분석 결과 P2P 트래픽은 기존의 웹 트래픽과 비교해 매우 버스트(burst)하였으며, P2P 응용프로그램들이 업스트림 트래픽과 다운스트림 트래픽을 대칭적으로 만들고 있었다. 네트워크에서 발생되는 패킷 손실과 지연 등 QoS 관련 파라미터를 예측하기 위해, 본 논문에서는 잘 알려진 자기 유사 트래픽 모델을 이용하여 P2P 트래픽을 모델링하고 트래픽 모델의 정확성을 검증하기위해 SSQ(Single Server Queue)를 이용하여 손실확률과 평균 지연시간을 비교하였다 시뮬레이션 결과 자기 유사 트래픽 모델은 P2P 트래픽의 성능을 잘 예측할 수 있었으며, 네트워크를 설계하거나 성능을 측정할 때 입력 트래픽으로서 이 트래픽 모델들을 사용할 수 있다.