• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.195-199
• /
• 2008

We present an approach to detect real plane for line base recognition and pose estimation Given 3D line segments, we set up reference plane for each line pair and measure the normal distance from the end point to the reference plane. And then, normal distances are measured between remains of line endpoints and reference plane to decide whether these lines are coplanar with respect to the reference plane. After we conduct this coplanarity test, we initiate visibility test using z-buffer value to prune out ambiguous planes from reference planes. We applied this algorithm to real images, and the results are found useful for evidence fusion and probabilistic verification to assist the line based recognition as well as 3D pose estimation.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.1
• /
• pp.70-76
• /
• 2006

The objective of this paper is to propose a reference model of a fire detection and monitoring system using MS/TP protocol. The reference model is designed to satisfy the requirements of response time and flexibility. The reference model is operated on the basis of BACnet, a standard communication protocol for building automation systems. Validity of the reference model was examined using a simulation model. This study also evaluated the performance of the BACnet-based fire detection and monitoring system in terms of network-induced delay. Simulation results show that the reference model satisfies the requirements of the fire detection and monitoring system.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.43-48
• /
• 2021

Most existing studies on the wide-area differential global positioning system (WADGPS) used standard positioning service (SPS) receivers in their observation reference stations which provide the central control station global positioning system (GPS) measurements to generate augmentation data. In the present study, it is considered to apply a precise positioning service (PPS) receiver to an observation reference station which is located in the threatened jamming area. Therefore, the reference station network consists of a PPS receiver based observation reference station and SPS receiver based observation reference stations. In this case, to maintain correction performance P1C1 differential code bias (DCB) should be compensated. In this paper, P1C1 DCB estimation algorithm was applied to the PPS/WADGPS system and performance test results using measurements in the Korean Peninsula were presented.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.242-242
• /
• 2022

As the aging population increases and interest in well-being increases, the importance of developing special crops increases. Natural medicine based on the special crops has been mainly used as an adjunct therapy for many diseases and symptoms based on culture, traditional medicine, and experience. In particular, it is attracting attention as a new resource to develop new drugs such as Artemisinin, a treatment for malaria. In order to efficiently use crops, it is essential to establish omics data such as genomes, transcriptomes, and metabolites of special-purpose crops. However, many special-purpose crops have large, heterogeneous and polyploid genomes that require high cost and long time to reference genome sequencing. Therefore, we built an inexpensive, fast, but very usefill reference transcriptome as the first step. We constructed high-quality reference transcriptom sets of Codonopsis lanceolata and Ixeridium dentatum with PacBio data. Our team will continue to construct reference transcriptoms of more special-purpose crops, and the data will be released by the National Agricultural Biotechnology Information Center (NABIC) in order to be widely used in agricultural as well as medical R&D.

• Journal of the Korean Society for Library and Information Science
• /
• v.46 no.1
• /
• pp.119-139
• /
• 2012

Due to the inferior condition of local library reference service, an air of indifference about users, and the increase in Internet resources, cooperative reference service in domestic libraries tend to be stagnant. The increase in Internet resources was reconsidered, aside from traditional library reference service, based on question and answer service. It shed new light on the importance of indirect service, which is focused on reliable knowledge base construction. This study analyzed cooperative reference service, which is managed by the Japanese Diet library that pursued indirect service contrary to ours. Based on that, it suggested a new takeoff possibility for Korean cooperative reference service.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.7
• /
• pp.1200-1209
• /
• 2003

In this paper, a unified methodology based on the local stress concept to estimate residual strength of locally thinned pipes. An underlying idea of the proposed methodology is that the local stress in the minimum section for locally thinned pipe is related to the reference stress, popularly used in creep problems. Then the problem remains how to define the reference stress, that is the reference load. Extensive three-dimensional finite element (FE) analyses were performed to simulate full-scale pipe tests conducted for various shapes of wall thinned area under internal pressure and bending moment. Based on these FE results, the reference load is proposed, which is independent of materials. A natural outcome of this method is the maximum load capacity. By comparing with existing test results, it is shown that the reference stress is related to the fracture stress, which in turn can be posed as the fracture criterion of locally thinned pipes. The proposed method is powerful as it can be easily generalised to more complex problems, such as pipe bends and tee-joints.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.2
• /
• pp.112-119
• /
• 2009

This paper presents a PLL(Phase Lock Loop) approach for effective speed and torque control of high speed miniature BLDCM(Brushless DC Motor) using hall sensor. The proposed speed control method based on PLL uses only a phase shift between reference pulse signal according to speed reference and actual pulse signal from hall sensor. It doesn't use any speed calculation, and calculates a direct current reference from phase shift. The current reference is changed to reduce the phase shift between reference and actual pulse. So the actual speed can keep the reference speed. The proposed control scheme is very simple but effective speed control is possible. In order to obtain a smooth torque production, the reference current is changed using acceleration and deceleration slope. The proposed control scheme is verified by experimental results of the 50W, 40,000[rpm] high speed miniature BLDCM.

• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.2
• /
• pp.152-163
• /
• 2005

The focus of enterprise collaboration of supply chain management, has changed from integrating and exchanging business information to integrating and managing business processes between business partners. However, the collaboration is difficult due to the inherent complexity such as diverse business processes and dynamic business environments. To settle these problems, a reference model based enterprise architecture framework for the collaboration of supply chains is proposed in this paper. The supply chain collaboration framework is composed of three reference models capturing the different views of supply chain collaboration: supply process reference model, service component reference model, and technology and standard reference model. As the framework adapts the OMG's metadata architecture, the processes in the supply chain can be extended and integrated with other value chains, such as design chains, when it is necessary. Using the proposed framework, business managers can rapidly integrate and manage their business processes with their suppliers and customers.

• Journal of The Korean Association For Science Education
• /
• v.33 no.3
• /
• pp.664-678
• /
• 2013

This study aims to investigate gifted students' explanations for daily celestial motion from the Earth-based and heliocentric frames of reference. Eleven sixth-grade elementary school students were chosen for this study and data was collected through a questionnaire and an in-depth interview. The collected data was analyzed into celestial objects which are the Sun, the moon and the stars and analyzed based on the Earth-based and heliocentric perspectives again. As a result of the research, most gifted students were able to connect the Earth-based and heliocentric frames of reference with the Sun's daily apparent motion. However, they understood the daily apparent motion of the moon and the stars far less frequently compared to the Sun's motion and could not explain the Earth's rotation clearly. The result of the interview showed that the lack of understanding about the daily celestial motion was caused by inaccurate understanding of the Earth's rotation such as using memorized knowledge learned in school and guessing the answer.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.3
• /
• pp.677-687
• /
• 2004

We consider the comparison of two one-parameter exponential distributions with the complete data as well as the type II censored data. We adapt Bayesian test procedure for nested hypothesis based on the Bayesian reference criterion. Specifically we derive the expression for the Bayesian reference criterion to solve our problem. Also we provide numerical examples using simulated data sets to illustrate our results.