• International Journal of Reliability and Applications
• /
• 제9권1호
• /
• pp.79-93
• /
• 2008

The aim of this work is to generalize reliability equivalence techniques to apply them to a system consists of two independent and non-identical components connected in series(parallel) system, that have constant failure rates. We shall improve the system by using one component only. We start by establishing two different types of reliability equivalence factors, the survival reliability equivalence (SRE) and mean reliability equivalence (MRE) factors. Our second studies, introducing some applications for our studies in airports and our life. Also, we introduced some numerical results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.530-534
• /
• 2002

This paper show serial communication method in order to design how to interface between fault tolerant systems with redundancy. Problem has been in the method that fault tolerant system had switched of serial data with common switching device. This problem degrade reliability in itself and total system which is interfaced with that serial communication system. So Arbitration module of serial communication which is suggested in this paper can improve the reliability using voter algorithm which fault is detected passively.

• 경영과학
• /
• 제14권2호
• /
• pp.63-68
• /
• 1997

Limiting probability in the steady state of regenerative process is one of the most useful characteristics. The formula for this limiting probability in the steady state of the regenerative process is presented in this paper. Because this formula is for the general model, it can be applied to many special systems including 2-unit redundant system. An example for this formula is also presented.

• 디지털융복합연구
• /
• 제15권3호
• /
• pp.181-186
• /
• 2017

시스템 최적화는 소스코드의 변경 없이 중복된 모듈을 추출하고, 추출된 모듈의 재사용을 위하여 프로그램의 구조를 변경하는 기법이다. 구조지향 개발과 객체지향 개발은 크로스커팅 영역의 모듈화에는 효율적이나 크로스커팅 개념을 모듈화 할 수 없다. 기존 시스템에서 크로스커팅 개념을 적용하기 위해, 각 시스템 내에 분산되어 있는 시스템 최적화 대상 모듈을 크로스커팅 영역으로 추출하는 기술이 필요하다. 본 논문에서는 개발이 완료된 시스템에서 중복 모듈을 추출하기 위한 방법을 제안한다. 제안하는 방법은 소스코드 분석을 통해 데이터 의존관계와 제어 의존관계를 분석하여 중복되는 요소를 추출한다. 추출된 중복된 요소는 시스템 최적화를 위하여 프로그램 의존 관계 분석에 사용될 수 있다. 중복된 의존관계 분석 결과는 제어 흐름 그래프로 변환되며, 이를 활용하여 최소 크로스커팅 모듈을 생성할 수 있다. 의존 관계 분석을 통해 추출된 요소는 크로스커팅 영역 모듈로 설정함으로써 시스템 내 중복된 코드를 최소화 할 수 있는 시스템 최적화 방법을 제시한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.230-233
• /
• 1999

The design and implementation of thyristor water cooling control systems in considered in this pape Coolant water is pumped through the thyristor heat sinks where heat is transferred from the thyristo to the water. This water is then pumped through outdoor air-to-water heat exchangers where heat I transferred to the outside air. Since the water must be pure, it is filtered and de-ionized. Also the water temperature must be below dew-point temperature. Redundant pumps, outdoor heat exchangers, power supply system, controller monitoring system are provided for system reliability and availability.

• 한국정보시스템학회지:정보시스템연구
• /
• 제4권
• /
• pp.85-104
• /
• 1995

In a loosely-coupled distributed database server system, a server failure and/or a communication failure can be masked by a resiliency mechanism. Recognizing that a distributed transaction executes at several servers during its lifetime, we propose a resiliency mechanism which allows continuous transaction processing in distributed database server systems in the presence of a server failure. The resiliency mechanism for transaction processing is achieved by keeping redundant information using a primary/backup approach. The purpose of this paper is to analyze the performance improvement opportunities with the resiliency mechanism and to present the design of the proposed system.

• Nuclear Engineering and Technology
• /
• 제39권2호
• /
• pp.133-142
• /
• 2007

The Electric Power Research Institute (EPRI) demonstrated a method for monitoring the performance of instrument channels in Topical Report (TR) 104965, 'On-Line Monitoring of Instrument Channel Performance.' This paper presents the results of several models originally developed by EPRI to monitor three nuclear plant sensor sets: Pressurizer Level, Reactor Protection System (RPS) Loop A, and Reactor Coolant System (RCS) Loop A Steam Generator (SG) Level. The sensor sets investigated include one redundant sensor model and two non-redundant sensor models. Each model employs an Auto-Associative Kernel Regression (AAKR) model architecture to predict correct sensor behavior. Performance of each of the developed models is evaluated using four metrics: accuracy, auto-sensitivity, cross-sensitivity, and newly developed Error Uncertainty Limit Monitoring (EULM) detectability. The uncertainty estimate for each model is also calculated through two methods: analytic formulas and Monte Carlo estimation. The uncertainty estimates are verified by calculating confidence interval coverages to assure that 95% of the measured data fall within the confidence intervals. The model performance evaluation identified the Pressurizer Level model as acceptable for on-line monitoring (OLM) implementation. The other two models, RPS Loop A and RCS Loop A SG Level, highlight two common problems that occur in model development and evaluation, namely faulty data and poor signal selection

• 한국정보처리학회논문지
• /
• 제6권1호
• /
• pp.216-224
• /
• 1999

날로 더욱 복잡해지는 제어 컴퓨터의 고 신뢰성 확보를 위해 시간여분(time redundancy)의 일종인 rollback과 roll-forward 기법 등을 TMR 구종에 적절하게 혼용하는 두 가지 방법을 제안한다. Rollback과 roll-forward 기법은 약간의 추가시간만을 사용하여 재구성(reconfiguration) 없이도 일시적인 결함(fault)에 의해 발생한 TMR 고장(failure)의 회복을 위해 상호보완적으로 사용될 수 있다. 본 논문은 시스템의 고장상태확률의 유도를 통해 전체 작업의 평균실행시간이 최소가 되는 최적의 checkpoint 간격벡터를 유도한다. 수치예제를 통해 제안된 방법들이 다른 고장회복 기법을 적용했을 때와 비교하여 매우 효과적임을 보이고, 다양한 환경 하에서 여러 가지 최적의 checkpoint 간격벡터를 유도하였으며, 시뮬레이션을 통한 정량적 결과로써 그 우수성을 비교하고 검증하였다

• 한국수소및신에너지학회논문집
• /
• 제34권3호
• /
• pp.297-306
• /
• 2023

The frequency of fatal accidents that can occur at hydrogen refueling station was compared with the risk criterion for the general public suggested by the health and safety executive. If hydrogen refueling station meets the accident prevention facility standards presented in KGS Code FP216/217, it was confirmed that the risk of hydrogen refueling station was not at an unacceptable (intolerable) risk level. However, the risk of hydrogen refueling station due to small leak was analyzed as low as reasonably practicable. Therefore, methods for improving the safety instrumented function of hydrogen refueling station were reviewed. It was confirmed that the risk of hydrogen refueling station can be affected by the number of installed safety instrumentation system components, redundant architecture, mission time, proof test interval, etc. And methods for maintaining the risk of hydrogen refueling station at an acceptable risk level have been proposed.

• 전기학회논문지
• /
• 제59권8호
• /
• pp.1456-1463
• /
• 2010

The safety critical systems in nuclear power plants should be designed to have a high level of fault tolerant capability because those systems are used for protection or mitigation of the postulated accidents of nuclear reactor. Due to increasing of the system complexity of the digital based system in nuclear fields, the reliability of the digital based systems without an auto-test or a self-diagnostic feature is generally lower than those of analog system. To overcome this problem, additional redundant architectures in each redundant channel and self-diagnostic features are commonly integrated into the digital safety systems. The self diagnostic function is a key factor for increasing fault tolerant capabilities in the digital based safety system. This paper presents an availability and safety evaluation model to analyze the effect to the system's fault tolerant capabilities depending on self-diagnostic features when the loss or erroneous behaviors of self-diagnostic function are expected to occur. The analysis result of the proposed model on the several modules of a safety platform shows that the improvement effect on unavailability of each module has generally become smaller than the result of usage of conventional models and the unavailability itself has changed significantly depending on the characteristics of failures or errors of self-diagnostic function.