• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.1
• /
• pp.76-87
• /
• 2010

According to the new rules and regulations (New SOLAS), major safety critical systems are to be designed to be redundant, which is called 'Redundancy Design'. This paper was to quantitatively analyze the degree of influence of the redundancy design applied to major safety critical systems using IMO's FSA(formal Safety Assessment) method. For the purpose of this study, the diesel engine system, which is actually one of major safety critical systems, was dealt with FMEA, FTA and ETA technique. In addition, whether the redundancy was met or not was verified and the degree of safety, or redundancy, was represented in terms of reliability. In conclusion, the safety of propulsion systems is possibly assessed systematically by estimating the risk level in terms of frequency and fatality.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.3
• /
• pp.745-756
• /
• 2016

As infringement accidents of personal information have often occurred and estimates of damages are too large, the government introduces many certifications related with personal information management system for protecting personal information. Among them, PIMS and PIPL share many points in common, so many complaints about duplicate regulation have been suggested. This study evaluates the duplication of two certifications in order to examine redundancy between PIMS and PIPL both of which have been controversial.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.10a
• /
• pp.240-247
• /
• 1993

The precise prediction of reserved carrying capacity of bridge as a system is extremely difficult especially when the bridges are highly redundant and significantly deteriorated or damaged. This paper is intended to propose a new approach for the evaluation of reserved system carrying capacity of bridges in terms of equivalent system-strength, which may be defined as a bridge system-strength corresponding to the system reliability of the bridge. This can be derived from an inverse process based on the concept of FOSM form of system reliability index. It may be emphasized that this approach is very useful for the evaluation of the deterministic system redundancy and reserve strength which are measured in terms of either probabilistic system redundancy factor and reserve factor or deterministic system redundancy factor and reserve factor. The system reliability of bridges is formulated as a parallel-series model obtained from the FAM(Failure Mode Approach) based on the major failure mechanisms. AFOSM and IST methods are used for the reliability analysis of the proposed models. The proposed approach and method for the system redundancy and reserve safety/strength are applied to the safety assessment of actual RC and steel box-girder bridges. The results of the evaluation of reserved system safety or bridge system-strength in terms of the system redundancy and the system safety/strength are significantly different from those of element reliability-based or conventional methods.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.468-471
• /
• 2012

This paper describes a construction scheme of hot backup or triple modular redundancy control system in a ground hot-firing test facility to carry out performance assessment of propulsion system used in a space launch vehicle. It was possible for a hot backup redundancy control system with manual operated console to simulate TMR control system. A console layout of control system in control center to restrict imprudent works of operators was proposed.

• Journal of Korea Multimedia Society
• /
• v.25 no.6
• /
• pp.793-806
• /
• 2022

As the IMO introduced MASS (Maritime Autonomous Surface Ships), ISO(International Organization for Standardization) announced ISO 19847 of a maritime data sharing standard for collecting and remotely managing data of ship systems. Previous literature evaluated the risk using HAZOP for ISO 19847 and proved that risk assessment is useful through experiments. However, redundancy of ISO 19847 ship data server which is one of the risk reduction method suggested in previous literature, was designed but couldn't tested due to the limitations of the conditions. So, in this study, to prove the usefulness of the ship data server redundancy of ISO 19847 which was not tested in previous literature. It based on the design of previous literature, and the network of ship data servers was modeled using the SES/DEVS format and simulated using the DEVS# open source library.

• Structural Engineering and Mechanics
• /
• v.91 no.3
• /
• pp.279-289
• /
• 2024

The purpose of this study is to represent a useful alternative for the preliminary seismic vulnerability assessment of existing reinforced concrete buildings by introducing a statistical approach employing the binary logistic regression technique. Two different predictive statistical models, namely full and reduced models, were generated utilizing building characteristics obtained from the damage database compiled after 1999 Düzce earthquake. Among the inspected building parameters, number of stories, overhang ratio, priority index, soft story index, normalized redundancy ratio and normalized lateral stiffness index were specifically selected as the predictor variables for vulnerability classification. As a result, normalized redundancy ratio and soft story index were identified as the most significant predictors affecting seismic vulnerability in terms of life safety performance level. In conclusion, it is revealed that both models are capable of classifying the set of buildings being severely damaged or collapsed with a balanced accuracy of 73%, hence, both are able to filter out high-priority buildings for life safety performance assessment. Thus, in this study, having the same high accuracy as the full model, the reduced model using fewer predictors is proposed as a simple and viable classifier for determining life safety levels of reinforced concrete buildings in the preliminary seismic risk assessment.

• Journal of Environmental Impact Assessment
• /
• v.22 no.3
• /
• pp.265-276
• /
• 2013

This study assessed documentation status of each environmental assessment items by analyzing the 243 case of marine EIS on the Consultation System of Sea Area Utilization. Observed rate of tidal elevation, current, temperature, salinity in maine environment were below 20%. The EFDC tool is applied substantially in hydrodynamic modeling. The verification process, however, is very insufficient using the recent observed data. Also, in-situ assessment rate of pelagic organism such as phytoplankton was below 50%, and assessment for Chlorophyll a was not accomplished. Ecological index evaluation for zooplankton and benthic ecosystem were not considered in statements. Especially, the rational assessment on the fisheries resources and protected species were very limited. It was necessary that the core assessment items (checklists) were established for environmental scoping. Furthermore, suggestion of information related to development, regional coastal management plan, aquaculture farms, and facilities were enhanced. The redundancy problem of proceedings between Environmental Impact Assessment and Sea Area Utilization Assessment System was improved.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.3
• /
• pp.141-148
• /
• 2020

For the important safety system, two or more units of identical equipment or redundant components with similar function were installed to prevent abnormal failure. If the failure probability of such equipment is independent, this redundancy could increase the system safety remarkably. However, if the failure of each component is highly correlated by installing in a structure or experiencing an earthquake event, the expected redundancy effect will decrease. Therefore, the seismic correlation of the equipment should be evaluated quantitatively for the seismic probabilistic safety assessment. The correlation effect can be explained in the procedure of constructing fragility curves. In this study, several methodologies to quantify the seismic correlation in the failure probability calculation for multiple components were reviewed and two possible ways considering the realistic situation were selected. Simple examples were tested to check the applicability of these methods. The conversion method between these two methods was suggested to render the evaluation using the advantages of each method possible.

• Journal of Software Assessment and Valuation
• /
• v.15 no.1
• /
• pp.79-86
• /
• 2019

Software dimension reduction identifies the commonality of elements and extracts important feature elements. So it reduces complexity by simplify and solves multi-collinearity problems. And it reduces redundancy by performing redundancy and noise detection. In this study, we proposed defect severity-based dimension reduction model. Proposed model is applied defect severity-based NASA dataset. And it is verified the number of dimensions in the column that affect the severity of the defect. Then it is compares and analyzes the dimensions of the data before and after reduction. In this study experiment result, the number of dimensions of PC4's dataset is 2 to 3. It was possible to reduce the dimension.

• Structural Engineering and Mechanics
• /
• v.6 no.5
• /
• pp.543-554
• /
• 1998

Space truss structures may be fabricated in any of several common grid configurations. With different configurations, the truss performance varies considerably affecting both its competitiveness and suitability for specific applications. The work presented in this paper is an assessment of the most commonly adopted truss configurations and their effect on truss characteristics such as the stiffness/weight value, member stress distribution, number of joints and members, degree of redundancy and cost. The study is parametric and covers wide variations of truss aspect ratios, boundary conditions and span/depth ratios. The results of this study could be of significant value to the design of space truss structures.