• 한국초전도ㆍ저온공학회논문지
• /
• 제10권3호
• /
• pp.36-42
• /
• 2008

The superconducting motor shows several advantages such as smaller size and higher efficiency against conventional motor especially utilized in ship propulsion application. However, this size reduction merit appears in large capacity more than several MW. We are going to develop a 5MW class synchronous motor with rotating High-Temperature Superconducting (HTS) coil. that is aimed to be utilized for ship propulsion so it has very low-speed, The ship propulsion motor must generate very high electromagnetic torque instead of low-speed. Therefore. the rotor (field) coils need very large magnetic flux that results in large amount of expensive HTS conductor for the field coil. In this paper a 5MW HTS motor for ship propulsion is considered to be designed with construction cost reduced via HTS field coil cost reduction because HTS conductor cost is critical factor in the construction cost of HTS motor. In order to reduce the HTS conductor amount. iron-cored rotor types are considered. so several cases with iron-core are compared one another and with an air-core case.

• 한국환경농학회지
• /
• 제28권2호
• /
• pp.165-170
• /
• 2009

환원상태가 발달된 담수상태의 토양이나 습지생태계에서 $NO_3^-$는 환원상태의 진전을 지연시키는 완충역할을 할 수 있다. 논토양에서 $NO_3^-$가 Fe의 환원과 그에 따른 P의 가용화에 미치는 영향을 조사하였다. 담수 후 10 cm 깊이 토양의 산화환원전위 변화는 $NO_3^-$를 처리한 토양과 처리하지 않은 토양에서 현저하게 달리 나타났으며, $NO_3^-$의 환원이 일어나는 동안에는 산화환원전위가 330${\sim}$360 mV 범위에서 유지되었다. 그리고 이 기간 동안 Fe의 환원은 현저히 억제되었다. $NO_3^-$를 처리한 토양 용액의 $PO_4^{3-}$ 함량은 담수 이후 0.2${\sim}$0.3 mg/L 수준 또는 그 이하로 유지되었으며, 반면 $NO_3^-$를 처리하지 않은 경우에는 담수 후 9일째부터 Fe의 환원과 함께 토양 용액의 $PO_4^{3-}$ 함량이 급격히 증가하였다. 일반적인 토양에서 무기태 P의 상당부분이 Fe 산화물에 고정된 형태 및 Fe와 결합된 형태로 존재하므로 Fe의 환원에 따라서 $PO_4^{3-}$가 함께 용출되는 것이다. 이상의 결과를 보면 토양중의 $NO_3^-$가 $Fe^{2+}$와 $PO_4^{3-}$의 용출을 조절하는 요인인 것으로 확인할 수 있다. 토양 용액중의 $NO_3^-$ 농도가 1 mg/L 이상으로 유지되는 상태에서는 토양의 산화환원전위가 330 mV 이하로 낮아지지 못하며, 따라서 Fe의 환원과 그에 따른 P의 용출 또한 현저히 억제되는 것으로 판단된다.

• 대한지역사회영양학회지
• /
• 제12권1호
• /
• pp.68-79
• /
• 2007

Iron deficiency is the most common nutritional problem that affects people of all ages in both industrialized and developing countries. Especially, college women are the target population for dietary iron deficiency. Recent study showed that the nutritional status of college women was poor because of insufficient food consumption and repeatabled weight reduction. The purpose of this study was to investigate the effects of nutrition counseling on the diet quality, nutritional status of iron and hematic parameters in college women who have self-recognized anemic symptoms. Anthropometric and dietary assessments as well as blood analysis, were carried out before and after the 8 weeks of nutrition counseling. During the experimental period, the 31 subjects were given nutrition education by a clinical dietitian. Nutrition counseling consisted of pathology of anemia, nutrition information for iron deficient anemia, diet information of balanced meals and menu choices for eating out. As a result, the frequencies of consumption of legumen and vegetables significantly increased after nutrition counseling(p<0.05). Daily intakes of protein, especially animal protein, vitamin E, niacin, heme iron, and zinc significantly increased(p<0.05). After nutrition counseling, some self-reported clinical symptoms such as 'dizziness', 'fatigue', 'short of breath', 'headache', 'sleeplessness', and 'beating heart' were significantly improved. Serum levels of transferrin(p<0.01) and total iron binding capacity levels(p<0.05) significantly increased. It could be concluded that the 8 weeks of nutrition counseling might be effective on quality of diet as well as iron status and it might also improve the some hematic parameters in college women who have self-recognized anemic symptoms.

• 자원리싸이클링
• /
• 제24권3호
• /
• pp.34-43
• /
• 2015

철강 산업에서의 원재료는 생산성, 품질, 가격경쟁력에 결정적인 역할을 하고 있다. 철강제품의 원재료를 함철부산물로 활용한다면, 함철부산물을 처리하기 위한 비용 및 환경오염문제를 해결할 뿐만 아니라 가격경쟁력을 높일 수 있다. 함철부산물들은 대부분 작읍입도를 가지고 있어서, 제강공정 내에 직접 투입하게 되면 열 유동 및 원료 비산 등의 문제가 발생하게 된다. 이러한 문제점을 해결하고 추가적인 환원을 유도하기 위해 철원에 탄재를 혼합한 뒤 단괴를 성형하여 제강공정 내에 투입하는 방법이 연구되고 있다. 본 연구에서는 함철부산물에 탄재를 혼합하여 단괴를 성형하는 방법에 대해 연구하였다. 함철부산물, 탄재, 융제, 바인더에 따른 CCBI (carbon composite briquette iron)의 성형성 및 압축강도를 확인하였다.

• Advances in materials Research
• /
• 제13권3호
• /
• pp.161-171
• /
• 2024

This study aimed to investigate the effect of physicochemical properties and mix ratios of iron ore (oxide feed): coke (reductant) on the carbothermic reductions of iron ore. Coke size was fixed at ≤63 ㎛ while iron ore size varied between 150-63 ㎛ and ≤63 ㎛ respectively. Mix ratios were changed from 100:0 (reference) to 80:20 and 60:40 while the temperature, heating rate and soaking duration in muffle furnace were fixed at 1100 ℃, 10 ℃/min and 1 hour. Particle size analyzer, XRF, CHNS and XRD analyses were used for determination of raw feed characteristics. The occurrence of phase transformations from various forms of iron oxides to iron during the carbothermal reductions were identified through XRD profiles and supported with weight loss (%). XRF analysis proved that iron ore is of high grade with 93.4% of Fe₂O₃ content. Other oxides present in minor amounts are 2% Al₂O₃ and 1.8% SiO₂ with negligible amounts of other compounds such as MnO, K₂O and CuO. Composite pellet with finer size iron particles (≤63 ㎛) and higher carbon content of 60:40 exhibited 45.13% weight lost compared to 32.30% and 3.88% respectively for 80:20 and 100:0 ratios. It is evident that reduction reactions can only occur with the presence of coke, the carbon supply. The small weight loss of 3.88% at 100:0 ratio occurs due to the removal of moisture and volatiles and oxidations of iron ore. Higher carbon supply at 60:40 leads into better heat and mass transfer and diffusivity during carbothermic reductions. Overall, finer particle size and higher carbon supply improves reactivity and gas-solid interactions resulting in increased reductions and phase transformations.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.133-134
• /
• 2005

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.268-276
• /
• 2004

As recent demands for cold rolling oil for steel, not only better lubricity, but cost reduction and improvement of work environment are increasingly required. In order to respond these demands, Nihon Parkerizing has developed rolling oils with completely new emulsification system. Comparing with conventional oils, the new system indicates better iron fine removability to maintain oil concentration, due to better iron fine dispersion, and superior mill stain resistance by spray stain test.

• 한국표면공학회지
• /
• 제8권1호
• /
• pp.1-9
• /
• 1975

The crorosion film of gilt bronz, silver and iron objects, which were excaved from Ancient Tomb of Silla Dynasty, was removed by the electrolytic reduction process. These metallic objects were mainly investigated for microstructure, designs and gilting film etc. Most iron objects might be made by hot forging process. The cold extrusion technique might be used for gold and silver objects, in addition to an amalgam method might be applied for the gilting Au film on Cu-alloy surface. For the gilting on glass surface, first, a Cu alloy was cladded on glass , next, Au-film was obtained on the Cu-ally by the amagum method.

• 청정기술
• /
• 제15권3호
• /
• pp.194-201
• /
• 2009

최근 주요 수질오염 물질로 대두되고 있는 질산성 질소의 제거를 목적으로 영가 철 나노입자에 의한 질산성 질소의 환원반응성을 평가하였다. 영가 철 나노입자의 제조방법에 따른 반응성 차이를 규명하기 위해 유기용매 상에 계면활성제를 첨가하여 나노미터 크기 수준의 수용액 분산상에서 입자를 합성하는 마이크로에멀젼 방법과, 수용액 상의 철 이온을 환원시켜 입자를 합성하는 두 가지 방법으로 영가 철 나노입자를 합성하였다. 또한 전기영동법으로 알루미늄에 침적시킨 영가 철 나노입자에 의한 질산성 질소 제거속도를 측정하고, 고정화되지 않은 나노 철 입자에 의한 반응속도와 비교하였다. 환원반응을 질산성 질소에 대한 1차 반응으로 가정하여 수용액 방법 및 마이크로에멀전 방법으로 제조된 영가 철 나노입자의 반응성을 평가한 결과, 반응속도상수는 각각 $1.40{\times}10^{-2}min^{-1}$ 와 $3.49{\times}10^{-2}min^{-1}$ 로서 비표면적에 비례하여 증가하였다. 알루미늄에 침적된 나노입자는 현탁된 나노입자의 반응과 비교하여 약 30% 감소된 반응속도를 보였으나, 과량의 질산성 질소가 존재하는 경우 나노 철의 단위 질량당 질산성 질소의 제거효율 면에서 더 우수한 특성을 보였다. 나노철 입자의 현탁액은 반응시간 30분 이내에 반응속도가 감소하는 경향을 보였으나, 알루미늄에 침적된 나노철 입자는 3시간 이상 활성을 유지하였으며, 최종 생성물로 기체 질소를 발생시키는 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.947-948
• /
• 2011

Efficiency of Multi D.O.F spherical motor is one of the important performance indicators. So Through the reduction of eddy current loss on how to improve the efficiency were studied. Stator iron core's material with high permeability and resistivity of material using the eddy current loss was reduced. However, it was the disadvantages of production and economic. For these reasons, prevent eddy current loss of the iron core of multi D.O.F spherical motor as a viable alternative to motor using rotor with double-air gap.