• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.376-379
• /
• 2007

In recent years, the natural damage associated with flood disaster has been dramatically increased. However, there is no rational method which reflects urban characteristics to estimate the regional safety assessment for flood disaster. The purpose of this study is to develop the regional safety assesment model for urban flood. Flood risk and reduction assesment were estimated by using the linear sum of the Z score of the assessment factors and the weight value of each factor from the expert survey data. And then the regional safety assessment was estimated by subtracting reduction factor value from risk factor value. GIS tool was used to estimate the factor assesment and integrated regional safety. This study can be used to determine the priority of flood protection project, execute the flood insurance and establish the urban plans and the flood mitigate plan.

• 한국결정성장학회지
• /
• 제14권2호
• /
• pp.50-57
• /
• 2004

Mercurous Bromide ($Hg_2Br_2$) crystals hold promise for many acousto-optic and opto-electronic applications. This material is prepared in closed ampoules by the physical vapor transport (PVT) growth method. We investigate the effects of solutal convection on the crystal growth rate in a horizontal configuration for diffusive-convection conditions and purely diffusion conditions achievable in a low gravity environment. Our results show that the growth rate is decreased by a factor of one-fourth with a ten reduction of gravitational acceleration near y = 2.0 cm. For 0.1 $g_O$ the growth rate pattern exhibits relatively flat which is intimately related to diffusion-dominated processes. The growth rate nonuniformity is regardless of aspect ratio across the interfacial positions from 0 to 1.5. Also, the effect of a factor of the ten reduction in the gravitational acceleration is same to both Ar = 5 and 2. The enlargement in the molecular weight of B from 50 to 500 by a factor 4 causes a decrease in the maximum growth rate by the same factor, indicative of the effect of solutal gradients.

• Wind and Structures
• /
• 제37권2호
• /
• pp.117-131
• /
• 2023

Korea Design Standard (KDS) will be updated with two major revisions on the assessment of wind load and performance-based wind design (PBWD). Major changes on the wind load assessment are the wind load factor and basic wind speed. Wind load factor in KDS is reduced from 1.3 to 1, and mean recurrence interval (MRI) for basic wind speed increases from 100 years to 500 years considering the reduction of wind load factor. Additional modification is made including pressure coefficient, torsional moment coefficient and spectrum, and aeroelastic instability. Combined effect of the updates of KDS code on the assessment of wind load is discussed with the case study on the specified sites and building. PBWD is newly added in KDS code to consider the cases with various target performance, vortex-induced vibration, aeroelastic instability, or inelastic behavior. Proposed methods and target performance for PBWD in KDS code are introduced.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1365-1374
• /
• 2014

Thirteen analogs of tridecapeptide ${\alpha}$-factor (WHWLQLKPGQPMY) of Saccharomyces cerevisiae with C- or N-terminal Trp extension and isosteric replacement by Aib at position 8 and 11, Trp at position 13, D-Ala at position 9, and Orn and Glu at position 6 were synthesized and assayed for their biological activity. Receptor binding assay was carried out using our newly developed spectrophotometric method with detector peptide 14. C- or N-terminal extended analogs, ${\alpha}$-factor-$[Trp]_n$ (n =1-5) 1-5 and $[N-Trp]_1$-${\alpha}$-factor 6, were all less active than native ${\alpha}$-factor and gradual decreases in both activity and receptor affinity were observed with greater Trp extension. Trp-substituted analog at position 13, $[Trp^{13}]{\alpha}$-factor 7, exhibited about 2-fold reductions in both activity and receptor affinity. Aib-substituted analogs, $[Aib^8]{\alpha}$-factor 8 and $[Aib^{11}]{\alpha}$-factor 9, showed 5- to 10-fold reduction in activity as well as 3-fold reduction in receptor affinity compared to native ${\alpha}$-factor. $[Orn^6]{\alpha}$-factor 10 demonstrated strong potency with a 7.0-fold increase in halo activity as well as 1.8-fold increase in receptor affinity compared to native ${\alpha}$-factor. For two double substituted analogs, [$Glu^6,{\small{D}}-Ala^9$]${\alpha}$-factor 12 showed the slightly decreased potency in halo activity compared to analog 10, whereas [$Orn^6,{\small{D}}-Ala^9$]${\alpha}$-factor 11 exhibited 15-fold higher halo activity as well as nearly 3-fold higher receptor affinity compared to native ${\alpha}$-factor.

• 한국물환경학회지
• /
• 제30권3호
• /
• pp.351-360
• /
• 2014

The allocation of margin of safety (MOS) at a uniform rate to all areas of the unit watershed makes it very difficult to keep the load allotment stable in the area for lack of reduction measures like forest land. This study developed an equation to calculate margin of safety differentially according to the regional characteristics. The equation was formulated on the basis of the regional characteristic factors such as a load contribution factor for land use type and a site conversion factor for the unit watershed. The load contribution factor represents a contribution of loads from a particular land use. The site conversion factor was derived from the site conversion ratio of a unit watershed. Margin of safety for the non-point pollution load in the land use sector decreased by 20~25% in three river basins. The margin of safety in the unit watersheds with low site occupation ratios decreased in high rate, while in the unit watersheds with large urban area decreased in low rate. With the application of the differential margin of safety considering regional characteristics, not only the reduction of pollution loads can become lighter but also it can be easier to develop plans for Total Maximum Daily Loads (TMDLs) even where the reduction measures are not available.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권5호
• /
• pp.101-112
• /
• 2011

본 논문은 중간부 부착파괴된 CFRP 보강 RC 보의 휨강도 산정을 다루고 있다. CFRP 보강 RC 보의 중간부 부착파괴의 영향을 고려하기 위해 강도감소계수를 제안하였다. 제안된 계수는 CFRP의 유효응력(또는 유효변형률)과 극한응력(또는 극한변형률)비로 정의 되는 유효변률 모델을 이용하여 실험데이터로부터 유도하였다. 휨강도 산정식은 강도감소계수를 변수로 하여 함수를 구성하였다. 제안된 강도감소계수의 유효성, 정확성 및 타당성을 입증하기 위해서 각국의 설계기준 및 연구자들에 의해 제안된 계수 값과 실험값을 본 연구결과와 비교 및 검증했다. 본 논문에서 제시하는 해석 결과는 제안된 강도감소계수가 중간부 부착파괴된 CFRP 보강 RC 보의 휨강도를 매우 효율적으로 평가할 수 있음을 나타낸다.

• 한국지진공학회논문집
• /
• 제14권4호
• /
• pp.1-15
• /
• 2010

이 논문에서는 연약지반에 세워진 건축물의 지진해석을 위해서 기준의 지반증폭계수에 대한 기초묻힘으로 인한 저감계수를 산정하는 연구를 비선형 의사 3D 지진해석이 가능한 P3DASS 유한요소 프로그램으로 수행하였다. 지반은 30m 두께로 균질하고 탄성과 점성이 있는 등방성 연약한 지반으로 암반 위에 놓인 것으로 가정하였고, 기초는 반경이 10-70m인 등가원형 강체기초로 기초묻힘은 0, 10, 20, 30m인 경우를 고려하였다. 지진해석은 노두에서 실측한 7개 지진기록의 유효지진가속도를 0.1g로 조정한 후 연약지반 밑 암반에서 지진기록을 생성하여 수행하였다. 연구에 의하면 매우 연약한 지반에 소형기초가 깊게 묻힌 경우 외에는 지반증폭계수가 점진적으로 감소하고 기초크기에 따른 편차도 크지 않은 것으로 평가되어 기초반경 별로 구한 저감계수에 대한 평균에 표준편차를 더한 저감계수를 기초묻힘에 따른 표준저감계수로 산정하였다. 지반증폭계수에 대한 표준저감계수를 실용화와 KBC 등의 기준을 위해 지반의 평균전단파속도와 지반종류에 따라 제안하였다.

• Journal of Microbiology and Biotechnology
• /
• 제11권3호
• /
• pp.497-503
• /
• 2001

The purpose of this study was to examine the efficacy and mechanism of the cryo-precipitation, solvent/detergent (S/D) treatment, monoclonal anti-FVIIIc antibody (mAb) column chromatography, Q-Sepharose column chromatography, and lyophilization involved in the manufacture of antithemophilic factor VII(GreenMono) from human plasma, in the removal and/or inactivation of blood-borne viruses. A variety of experimental model viruses for human pathogenic viruses, including the bovine viral diarrhoea virus (BVDV), bovine herpes virus (BHV), murine encephalomyocarditis virus (EMCV), and porcine parvovirus (PPV), were all selected for this study. BHV and EMCV were effectively partitioned from a factor VII during the cryo-precipitation with a log reduction factor of 2.83 and 3.24, respectively. S/D treatment using the organic solvent, tri(n-butyl) phosphate (TNBP), and the detergent, Triton X-100, was a robust and effective step in inactivating enveloped viruses. The titers of BHV and BVDV were reduced from the initial titer of 8.85 and $7.89{log_10} {TCID_50}$, respectively, reaching undetectable levels within 1 min of the S/D treatment. The mAb chromatography was the most effective step for removing nonenveloped viruses, EMCV and PPV, with the log reduction factors of 4.86 and 3.72, respectively. Q-Sepharose chromatography showed a significant efficacy for partitioning BHV, BVDV, EMCV, and PPV with the log reduction the log reduction factors of 2.32, 2.49, 2.60, and 1.33 respectively. Lyophilization was an effective step in inactivating g nonenveloped viruses rather than enveloped viruses, where the log reduction factors of BHV, BVDV, DMCV, and PPV were 1.41, 1.79, 4.76, and 2.05, respectively. The cumulative log reduction factors of BHV, BVDV, EMCV, and PPV were ${\geqq}$11.12, ${\geqq}$7.88, 15.46, and 7.10, respectively. These results indicate that the production process for GreenMono has a sufficient virus-reducing capacity to achieve a high margin of the virus safety.

• 한국태양에너지학회 논문집
• /
• 제36권6호
• /
• pp.13-24
• /
• 2016

The government introduced a mandatory installation system of new & renewable energy for public building to meet the target of greenhouse gas reduction and also suggest a correction factor for new renewable energy to expand the installation of various new & renewable energy systems. The introduction of correction factors, however, was followed by the reduction of installation size of new & renewable energy sources. Assuming that it was caused by a correction factor for each new renewable energy source calculated by the initial costs, this study proposed a new correction factor approach based on payback periods to reflect the technology element in the calculation process of correction factors additionally. The application results of new correction factors show that it was possible to do complex calculations including the economic and technological aspects to select a new & renewable energy system and that the installation size was also enlarged.

• 한국기후변화학회지
• /
• 제5권3호
• /
• pp.219-230
• /
• 2014

In this study, greenhouse gas emission of magnesium industry was estimated and the reduction potential of the greenhouse gas emission was evaluated with reduction technologies. Default value of IPCC guideline was used to calculate the greenhouse gas emission and $SF_6$ alternatives were considered in reduction potential. Import of magnesium ingot was 22,806 ton in 2013, which will be expected to increase to 81,700 ton with 20% rate in 2020. Magnesium ingot was consumed to produce magnesium alloy in diecasting process. Recently, commercial production of crown magnesium and magensium plate began. Based on ingot consumption, $CO_2$ emission of domestic magnesium industry was estimated to 504,000 ton, which is about 0.79% of domestic industrial emissions. Reduction potential of diecasting process was estimated to 489,320 ton by changing SF6 to alternative gases such as HFC-134a, Novec-612. Emission factor of Tier 3 level should be developed to enhance the accuracy of greeenhouse gas emission of magnesium industry.