DOI QR코드

DOI QR Code

Evaluation of Nominal Flexural Strength in RC Beams Strengthend with CFRP Plate and Failed by Intermediate Crack Debonding

중간부 부착파괴된 CFRP 판 보강 RC 보의 휨강도 평가

  • 홍성남 (성균관대학교 과학기술연구소) ;
  • 박종인 (성균관대학교 초고층.장대교량학과) ;
  • 김태완 (성균관대학교 BK21) ;
  • 박선규 (성균관대학교 사회환경시스템공학과)
  • Received : 2010.11.01
  • Accepted : 2011.06.14
  • Published : 2011.09.30

Abstract

This paper shows a study carried out on the estimation of nominal flexural strength for CFRP-plated RC beams failed by intermediate crack debonding. A strength reduction factor is proposed to consider the effect of the intermediate crack debonding for the determination of nominal flexural strength. The proposed factor is derived from experimental data and utilizes the ratio of effective stress(or strain) in the CFRP plate to its ultimate strength(or strain) which is called effective strain model. An analytical equation for the estimation of the nominal flexural strength is formulated as a function of strength reduction factor. The validity, accuracy and efficiency of the proposed factor are established by comparing the analytical results with the experimental data, and the major design codes, as well as a number of factors given by researchers. The analytical results presented in this paper indicate that the proposed factor can effectively estimate the flexural nominal strength of CFRP-plated reinforced concrete beams failed by intermediate crack debonding.

본 논문은 중간부 부착파괴된 CFRP 보강 RC 보의 휨강도 산정을 다루고 있다. CFRP 보강 RC 보의 중간부 부착파괴의 영향을 고려하기 위해 강도감소계수를 제안하였다. 제안된 계수는 CFRP의 유효응력(또는 유효변형률)과 극한응력(또는 극한변형률)비로 정의 되는 유효변률 모델을 이용하여 실험데이터로부터 유도하였다. 휨강도 산정식은 강도감소계수를 변수로 하여 함수를 구성하였다. 제안된 강도감소계수의 유효성, 정확성 및 타당성을 입증하기 위해서 각국의 설계기준 및 연구자들에 의해 제안된 계수 값과 실험값을 본 연구결과와 비교 및 검증했다. 본 논문에서 제시하는 해석 결과는 제안된 강도감소계수가 중간부 부착파괴된 CFRP 보강 RC 보의 휨강도를 매우 효율적으로 평가할 수 있음을 나타낸다.

Keywords

References

  1. 김진율, CFRP로 보강된 철근콘크리트 보의 정적 및 피로 거동, 성균관대학교 석사학위논문, 서울, 2007.
  2. 박중열, 조흥동, 한상훈, "탄소섬유판으로 보강된 철근콘크리트 보의 보강방법에 따른 휨성능 개선", 대한토목학회논문집, 제22권 4-A호, 2002, pp.895-903.
  3. 양동석, 탄소섬유 계면부착을 고려한 보강 RC 휨부재의 거동 특성, 성균관대학교 박사학위논문, 서울, 2005.
  4. 양동석, 홍성남, 박선규, "탄소섬유판으로 부착보강된 철근콘크리트 부재의 계면 부착거동", 대한토목학회논문집, 제27권 3호, 2007, pp.443-452.
  5. 이용택, 이리형, "CFS로 보강된 철근콘크리트 보의 휨내력향상효과에 관한 연구", 구조물진단학회지, 제3권 3호, 2008, pp.203-212.
  6. ACI 440.2R-02, Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures, American Concrete Institute, USA. 2002.
  7. Ahmed, O., Gemert D. V. and Vanderwalle L., "Improved model for plate end shear of CFRP strengthened RC beams", Cement & Concrete Composites, vol. 23, No. 1, 2001, pp.3-19. https://doi.org/10.1016/S0958-9465(00)00051-2
  8. Aram, M. R., Czaderski, Z. and Motavalli, M., "Debonding failure modes of flexural FRP-strengthened RC beams", Composites Part B: Engineering, vol. 39, No. 5, 2008, pp.826-841. https://doi.org/10.1016/j.compositesb.2007.10.006
  9. Colotti, V., Spadea, G. and Swamy, R. N., "Structural model to predict the failure behavior of plated reinforced concrete beams", Journal of Composites for Construction, vol. 8, No. 2, 2004, pp.104-122. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:2(104)
  10. CSA S806-02, Design and construction of building components with fibre reinforced polymers, Canadian Standards Association, Canada. 2002.
  11. Gao, B., Leung, C. K. Y. and Kim, J. K., "Prediction of concrete cover separation failure for RC beams strengthened with CFRP strips", Engineering Structures, vol. 27, No. 2, 2004, pp.177-189.
  12. Garden, H. N. and Hollaway, L. C., "An experimental study of the influence of plate end anchorage of carbon fibre composite plates used to strengthen reinforced concrete beams", Composite Structures, vol. 29, 1998, pp.175-188.
  13. Garden, H. N., Quantrill, R. J., Hollaway, L. C., Thorne, A. M. and Parke, G., "An experimental study of the anchorage length of carbon fibre composite plates used to strengthen reinforced concrete beams", Construction and Building Materials, vol. 12, 1998, pp.203-219. https://doi.org/10.1016/S0950-0618(98)00002-6
  14. Head, P. R., "Advanced composites in civil engineering - A critical overview at this high interest, low use stage of development", International Conference on Advanced Composite Materials in Bridges and Structures, Montreal, Canada, 1996, pp.3-15.
  15. Heffernan, P. J. and Erki, M. A., "Equivalent capacity and efficiency of reinforced concrete beams strengthened with carbon fibre reinforced plastic sheets", Canadian Journal of Civil Engineering, vol. 23, No. 1, 1996, pp.21-29. https://doi.org/10.1139/l96-003
  16. JCI, Technical report on continuous fiber reinforced concrete, Japan Concrete Institute, Tokyo, 1998.
  17. Lu, X. Z., Teng, J. G., Ye, L. P. and Jiang, J. J., "Intermediate crack debonding in FRP-strengthened RC beams: FE analysis and strength model", Journal of Composites for Construction, vol. 11, No. 2, 2007, pp.161-174. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:2(161)
  18. Meier, U. and Winistorfer, A., "Retrofitting of structures through external bonding of CFRP sheets", Proceedings of the Second International RILEM Symposium, Ghent, Belgium, 1995, pp.509-516.
  19. Oehlers, D. J. and Moran, J. P., "Premature failure of externally plated reinforced concrete beams", Journal of Structural Engineering, vol. 116, No. 4, 1990, pp.978-995. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:4(978)
  20. Oehlers D. J. and Seracino R., Design of FRP and steel plated RC structures: retrofitting beams and slabs for strength, stiffness and ductility, Elsevier, Oxford, 2004.
  21. Pesic, N. and Pilakoutas, K., "Concrete beams with externally bonded flexural FRP-reinforcement: analytical investigation of debonding failure", Composites Part B: Engineering, vol. 34, No. 4, 2003, pp.327-338. https://doi.org/10.1016/S1359-8368(02)00139-7
  22. Quantrill, R. J., Hollaway, L. C. and Thorne, A. M., "Predictions of the maximum plate end stresses of FRP strengthened beam: Part II", Magazine of Concrete Research, vol. 48, No. 177, 1996, pp.343-351. https://doi.org/10.1680/macr.1996.48.177.343
  23. Rahimi, H. and Hutchinson, A., "Concrete beams strengthened with externally bonded FRP plates", Journal of Composites for Construction, vol. 5, No. 1, 2001, pp.44-56. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(44)
  24. Ross, C. A., Jerome, D. M., Tedesco, J. W. and Hughes, M. L., "Strengthening of reinforced concrete beams with externally bonded composite laminates", ACI Structural Journal, vol. 96, No. 2, 1999, pp.212-220.
  25. Saadatmanesh, H. and Ebsani, M. R., "RC beams strengthened with FRP plates II: analysis and parametric study", Journal of Structural Engineering, vol. 117, No. 2, 1991, pp.3434-3455. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:11(3434)
  26. Sebastian, W. M., "Significance of midspan debonding failure in FRP-plated concrete beams", Journal of Structural Engineering, vol. 127, No. 7, 2001, pp.792-798. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:7(792)
  27. Teng, J. G., Chen, J. F., Smith, S. T. and Lam, L., FRP-strengthened RC structures, John-Willy & Sons, UK. 2002.
  28. Teng, J. G., Smith, S. T., Yao J. and Chen, J. F., "Intermediate crack-induced debonding in RC beams and slabs", Construction and Building Materials, vol. 17, 2003, pp.447-462. https://doi.org/10.1016/S0950-0618(03)00043-6
  29. Triantafillou, T. and Plevris, N., "Strengthening of RC beams with epoxy-bonded fibre-composite materials", Construction and Building Materials, vol. 25, 1992, pp.201-211.
  30. Tumialan, G., Serra, P., Nanni, A. and Belarbi, A., "Concrete cover delamination in reinforced concrete beams strengthened with carbon fiber reinforced polymer sheets", Proceedings of the Fourth International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Maryland, USA, pp.725-735.
  31. Yao, J. and Teng, J. G., "Plate end debonding in FRP-plated RC beams-I: Experiments", Engineering Structures, vol. 29, No. 10, 2007a, pp.2457-2471. https://doi.org/10.1016/j.engstruct.2006.11.022
  32. Yao, J. and Teng, J. G., "Plate end debonding in FRP-plated RC beams-II: Strength model", Engineering Structures, vol. 29, No. 10, 2007b, pp.2472-2486. https://doi.org/10.1016/j.engstruct.2006.11.023