• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.153-158
• /
• 2001

The effects of polymer-cement ratio and shrinkage-reducing agent content on the durability characteristics of ultrarapid-hardening polymer-modified mortars using redispersible polymer powder are examined. As a result, the flexural and tensile strengths of the ultrarapid-hardening polymer-modified mortars using redispersible polymer powder tend to increase with increasing polymer-cement ratio, and tend to decrease with increasing shrinkage-reducing agent content. However, the compressive strength of the ultrarapid-hardening polymer-modified mortars using redispersible polymer powder decrease with increasing polymer-cement ratio and shrinkage-reducing agent content. And, water absorption and mass change of chemicals resistance of ultrarapid-hardening polymer-modified mortars using redispersible polymer powder tend to decrease with increasing polymer-cement ratio.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.65-70
• /
• 1994

The aim of this study is to develop the High Workable Concrete which has not so large slump loss with time using blast-furnace cement and High range water reducing agent. Normal portland cement and blast-furnce cement was used as binders and water-binder ratio were ranging from 34% to 50%. 5 kinds of Superplasticizer and High range water reducing agent were used. Test results show that the blast-furmace cement was much higher flowability than normal portland cement and domestic High rang water reducing and AE agent had very small slump loss than others. The compactability of High Workable Concrete was also confirmed using model wall-form.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.312-315
• /
• 2004

The effects of polymer-cement ratio, antifoamer content and shrinkage-reducing agent content on the strength of high-fluidity polymer-modified mortars using redispersible polymer powder are examined. As a result, the flexural and tensile strengths of the high-fluidity polymer-modified mortars using redispersible polymer powder tend to increase with increasing polymer-cement ratio, and tend to decrease with increasing shrinkage-reducing agent content, regardless of the antifoamer content. However, the compressive strength of the high-fluidity polymer-modified mortars using redispersible polymer powder decrease with increasing polymer-cement ratio and shrinkage-reducing agent content.

• Textile Coloration and Finishing
• /
• v.17 no.4 s.83
• /
• pp.1-6
• /
• 2005

We studied the degree of variety of indigo for the electrochemical redox reaction in addition of reducing agent and the electrokinetic parameters. The electrokinetic parameters such asthe number of electron and the exchange rate constant were obtained by cyclic voltammetry. With increasing scan rate, the reduction currents of indigo were increased and the reduction potentials were shifted to the negative direction. As the results, the reduction processes of the indigo were proceeding to totally irreversible and diffusion controlled reaction. Also, exchange rate constant ($k^0$) and diffusion coefficient ($D_0$) of indigo were decreased by increasing concentration of reducing agent. We found that the less concentration, the more easily diffused and electron transferred and the product was more stable.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.115-118
• /
• 2001

The effects of polymer-cement ratio and shrinkage-reducing agent content on the strength properties of ultrarapid-hardening polymer-modified mortars using redispersible polymer powder are examined. As a result, the flexural and tensile strengths of the ultrarapid-hardening polymer-modified mortars using redispersible polymer powder tend to increase with increasing polymer-cement ratio, and tend to decrease with increasing shrinkage-reducing agent content. However, the compressive strength of the ultrarapid-hardening polymer-modified mortars using redispersible polymer powder decrease with increasing polymer-cement ratio and shrinkage-reducing agent content.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.93-96
• /
• 2005

High temperature furnace such as Steam power plant and incinerator contribute considerable part of NOx generation and face urgent demand of De-NOx system. Reducing agents are necessary to use De-NOx system. In this study mixing caused by direct injection of reducing agent solution spray into flue gas duct was measured. Carbonated water was used as tracer and simulated agent because ammonia as a reducing agent is not proper to experiment. Mixing and evaporation must occur simultaneously and quickly enough to achieve desirable efficiency. To achieve that, the angle of attack of static mixer and the location is simulated and $CO_2$ concentration is measured.

• Journal of the Korea Concrete Institute
• /
• v.12 no.3
• /
• pp.11-19
• /
• 2000

It has been reported that few manufacturers of cement mortar for precast products use chemical and mineral admixture due to the absense of restrictions related to the application of admixture and the poor manufacturing facilities. Therefore, this paper is intended to contribute to the improvement of quality by investigating the properties of cement mortar for precast products using fly ash, blast furnace slag and AE water reducing agent. According to the test results. it was found that the cement mortar products using fly ash and AE water-reducing agent had better qualities than those of ordinary portland cement.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.925-928
• /
• 2006

The effects of polymer-binder ratio, antifoamer content and shrinkage-reducing agent content on the air content and strengths of high-fluidity polymer-modified pastes are examined. As a result, the air content of the polymer-modified pastes tends to decrease with increasing polymer-binder ratio and antifoamer content. Irrespective of the antifoamer content, the flexural and tensile strengths of the high-fluidity polymer-modified pastes tends to increase with increasing polymer-binder ratio, and tend to decrease with increasing shrinkage-reducing agent content. However, the compressive strength of the polymer-modified pastes decreases with increasing polymer-binder ratio and shrinkage-reducing agent content.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.145-146
• /
• 2017

This research aimed to analyze the fundamental properties of cement mortar accompanying the change of the solid contents of the maintenance type PC water reducing agent. As a result of the experiment, it was found that the properties of fresh mortar show a tendency to decrease as the solid contents decreases in the case of flow and air contents, and the decrease width with time is small. It was found that the compressive strength of the hardened mortar has almost no difference due to the change of the solid fraction.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.22-23
• /
• 2017

This research aimed to analyze the fundamental properties of cement mortar accompanying the change of solid contents of PC type water reducing agent. As a result of the experiment, in the case of flow to the properties of the fresh mortar, it shows a tendency to decrease as the solid content ratio decreases, and the decrease width with the passage of time is greatly reduced when 30 minutes passed since the passage of 60minutes It turned out that it was. In the case of the air contents and the compressive strength, it was found that there is almost no difference due to the change in the solid contents.