• 제목/요약/키워드: reduced-order controller

검색결과 235건 처리시간 0.027초

시소 시스템을 위한 RCGA 기반의 상태피드백 제어 (RCGA-Based State Feedback Control for Seesaw Systems)

  • 류기탁;소명옥
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2007년도 추계학술대회 및 제23회 정기총회
    • /
    • pp.307-308
    • /
    • 2007
  • 일반적으로 대부분의 실제 시스템은 복잡하고, 외란이나 불완전한 지식에 영향을 받으며, 비선형 특성을 가지고 있다. 이러한 시스템을 제어하기 위해 현대제어 이론에 기초한 제어기가 연구되고 있다. 그러나 이러한 제어이론과 제어기를 산업현장에 검증 없이 곧 바로 적용하면 시스템의 손상이 발생할 수 있으므로 모의실험을 통한 검증이 반드시 필요하다. 본 논문에서는 산업현장의 불안정과 비선형성을 대표할 수 있는 시소시스템을 모형대상으로 설정하여 RCGA기반의 상태피드백 제어기와 상태관측기를 설계하여 이들을 결합한 제어시스템을 설계한다. 다양한 초기조건과 외란에 대한 시뮬레이션을 통해 제어시스템의 유효성을 확인한다.

  • PDF

축소모델을 이용한 최적화된 Smith Predictor 제어기 설계 (Model Reduction Method and Optimized Smith Predictor Controller Design using Reduced Model)

  • 최정내;조준호;이원혁;황형수
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제52권11호
    • /
    • pp.619-625
    • /
    • 2003
  • We proposed an optimum PID controller design method of the Smith Predictor It can be applied to various processes. The real process is approximated via the second order plus time delay model (SOPTD) whose parameters are specified through a model reduction algorithm. We already proposed a new model reduction method that considered four point in the Nyquist curve to reduced the steady state error between the real process model and the reduced model using the gradient decent method and the genetic algorithms. In addition, the Smith predictor is used to compensate time delay of the real process model. In this paper, the new optimum parameter tuning algorithm for PID controller of the Smith Predictor is proposed through ITAE as performance index. The Simulation results show the validity and improvement of performance for various processes.

SECOND-ORDER SLIDING-MODE CONTROL FOR A PRESSURIZED WATER NUCLEAR REACTOR CONSIDERING THE XENON CONCENTRATION FEEDBACK

  • ANSARIFAR, GHOLAM REZA;RAFIEI, MAESAM
    • Nuclear Engineering and Technology
    • /
    • 제47권1호
    • /
    • pp.94-101
    • /
    • 2015
  • This paper presents findings on the second-order sliding-mode controller for a nuclear research reactor. Sliding-mode controllers for nuclear reactors have been used for some time, but higher-order sliding-mode controllers have the added advantage of reduced chattering. The nonlinear model of Pakistan Research Reactor-1 has been used for higherorder sliding-mode controller design and performance evaluation. The reactor core is simulated based on point kinetics equations and one delayed neutron groups. The model assumes feedback from lumped fuel and coolant temperatures. The effect of xenon concentration is also considered. The employed method is easy to implement in practical applications, and the second-order sliding-mode control exhibits the desired dynamic properties during the entire output-tracking process. Simulation results are presented to demonstrate the effectiveness of the proposed controller in terms of performance, robustness, and stability.

Minimal Order LQG/LTR 기법에 의한 모형헬리콥터의 정지비행 자세제어 (Hovering Flight Control for a Model Helicopter using the Minimal-Order LQG/LTR Technique)

  • 양준선;한권희;이자성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
    • /
    • pp.457-459
    • /
    • 1998
  • This paper presents a 3-DOF hovering flight controller for a model helicopter using the minimal order LQG/LTR technique. A model helicopter is an unstable multi-input multi-output nonlinear system strongly exposed to disturbances, so a robust multi-variable control theory should be applied to control it. The minimal order LQG/LTR technique which uses a reduced-order observer in the LTR procedure is used to design the controller. Performances for the 3-DOF hovering flight controller are evaluated through computer simulations.

  • PDF

새로운 축소 모델을 이용한 Smith-Predictor 제어기 설계 (Smith-Predictor Controller Design Using New Reduction Model)

  • 최정내;조준호;황형수
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제52권1호
    • /
    • pp.9-15
    • /
    • 2003
  • To improve the performance of PID controller of high order systems by model reduction, we proposed two model reduction methods. One, Original model with two point $({\angle}G(jw)=\;-{\pi}/2,\;-{\pi})$ in Nyquist curve used gradient base method and genetic algorithm. The other, Original model without two point$({\angle}G(jw)=\;-{\pi}/2,\;-{\pi})$in Nyquist curve used to add very small dead time. This method has annexed very small dead time on the base model for reduction, and we remove it after getting the reduced model, and , we improved Smith-predictor for a dead-time compensator using genetic algorithms. This method considered four points$({\angle}G(jw)=0,\;-\pi/2,\;-\pi,\;-3\pi/2)$ in the Nyquist curve to reduce steady state error between original and reduced model. It is shown that the proposed methods have more performance than the conventional method.

조속기 입력의 변화율을 고려한 최적주파수 제어 (LFC Considering the Changing Rate of Governor Speed)

  • 박영문;유찬수
    • 대한전기학회논문지
    • /
    • 제33권3호
    • /
    • pp.100-105
    • /
    • 1984
  • The optimal Load-Frequency Control law is presented with the performance criterion which includes the changing rate of governor speed. The authors propose two controllers. One is a dynamic controller using the method of state augmentation and the other is a constant gain controller with use of the trace function lemma by Kleinman. For a more practical realization, a reduced-order Luenberger observer is applied in order to identify unmeasurable states and power demand. The control schemees presented here are tested through the model developed by Elgerd, and the usefulness is demonstrated.

  • PDF

A controller comprising tail wing control of a hybrid autonomous underwater vehicle for use as an underwater glider

  • Joo, Moon G.
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제11권2호
    • /
    • pp.865-874
    • /
    • 2019
  • A controller for an underwater glider is presented. Considered underwater glider is a torpedo-shaped autonomous underwater vehicle installing adjustable buoyancy bag and movable battery in it. The controller is composed of an LQR controller to maintain zigzag vertical movement for gliding and two PD controllers to control elevator/rudder angles. The LQR controller controls the pumping speed into the buoyancy bag and the moving speed to locate the battery. One of the PD controller controls the elevator angle to assist the LQR controller, and the other controls the rudder angle to adjust the direction of the underwater glider. A reduced order Luenberger observer is adopted to estimates the center of gravity of the glider and the buoyancy mass that are essential but cannot be measured. Mathematical simulation using Matlab proved the validity of the proposed controller to obtain better performance than conventional LQR only controller under the influence of sea current.

비최소 위상 확률 시스템을 대상으로 한 견실한 적응 IMC 제어기 (Robust adaptive IMC controller for a class of nonminimum phase stochastic systems)

  • 최종호;김호찬
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
    • /
    • pp.139-144
    • /
    • 1993
  • In this paper, a robust reduced order adaptive controller is proposed based on Internal Model Control(IMC) structure for stochastic linear stable systems. The concept of gain margin is utilized to make the adaptive IMC controller robust. We prove the stability of the proposed adaptive IMC system for stable plants under the assumption that upper bounds for system orders are known. Simulation results show that the proposed method has good performance and stability robustness.

  • PDF

Fixed-Order $H_{\infty}$ Controller Design for Descriptor Systems

  • Zhai, Guisheng;Yoshida, Masaharu;Koyama, Naoki
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.898-902
    • /
    • 2003
  • For linear descriptor systems, we consider the $H_{INFTY}$ controller design problem via output feedback. Both static output feedback and dynamic one are discussed. First, in the case of static output feedback, we reduce our control problem to solving a bilinear matrix inequality (BMI) with respect to the controller coefficient matrix, a Lyapunov matrix and a matrix related to the descriptor matrix. Under a matching condition between the descriptor matrix and the measured output matrix (or the control input matrix), we propose setting the Lyapunov matrix in the BMI as being block diagonal appropriately so that the BMI is reduced to LMIs. For fixed-order dynamic $H_{INFTY}$ output feedback, we formulate the control problem equivalently as the one of static output feedback design, and thus the same approach can be applied.

  • PDF