• Composites Research
• /
• 제13권2호
• /
• pp.51-60
• /
• 2000

본 논문에서는 두께 방향의 와인딩 각도 변화를 고려한 필라멘트 와인딩 된 압력탱크의 해석을 수행하였다. 두께방향의 와인딩 각도를 고려하기 위하여 임의의 맨드릴 표면에 대한 필라멘트 와인딩 궤적을 찾아낼 수 있는 semi-geodesic path식을 도입하였다. 필라멘트 와인딩 된 압력탱크의 유한요소 모델링을 위하여 3차원 적층고체요소를 사용하였으며, 상용프로그램ABAQUS를 이용하여 유한요소해석을 수행하였다. 해석에서는 모재 파손에 의한 강성저하를 모사하기 위하여 재료 비선형성을 고려하였으며, 이를 위하여 각 하중 증분 후에 섬유 수직방향 응력을 모재의 인장강도와 비교하는 최대응력파손이론을 도입하였고, 파손이 일어난 층에 대해서 모재 방향의 재료 상수를 1/10로 저하시켰다. 그리고, 점진적 파손해석을 수행한 결과를 문헌에 주어진 실험데이터와 비교하였다.

• 한국항공우주학회지
• /
• 제36권10호
• /
• pp.1017-1025
• /
• 2008

본 연구에서는 무인항공기의 대기속도 및 압력고도를 측정하는 공력자료시스템(ADS)을 개발하였다. ADS는 비행제어시스템에 항공기 속도와 고도를 제공함으로써 실속속도 이하에서의 비행을 막고 고도유지 비행을 가능하게 하는 시스템이다. 무인항공기의 속도와 고도를 정확하게 측정하는 것은 비행성능을 확인하고 항공기의 안전성을 보장하기 위한 중요한 부분이다. 본 논문에서 개발된 ADS는 MEMS 압력센서, 저역통과필터, 마이크로 컨트롤러 그리고 피토튜브로 구성되어 있다. 온도보정과 압력보정을 통해 ADS 데이터의 오차를 줄였으며 비행시험에서 GPS 데이터와 ADS 데이터를 비교하였다.

• 한국생활과학회지
• /
• 제21권1호
• /
• pp.141-149
• /
• 2012

This study investigates the effects of wear training on blood pressure and blood lipid profiles. For the purpose of this research, 'wear training' refers to the alternating stimulation of temperature while using specific clothing under controlled situations ($18.8{\pm}0.2^{\circ}C$, $38{\pm}3%RH$). The participants alternated between two different garments producing a $1.5^{\circ}C$ difference in the innerest microclimate temperature over a period of 4 weeks. The experiments in this study were conducted in a comfortable environment after sufficient rest. The results were as follows. The systolic blood pressure and mean arterial pressure were lower in the post test than in the pre test (p<.05). The atherogenic index (AI) was also reduced and the LDL-C/HDL-C ratio increased (p<.05) in the post test. These results demonstrated that wear training positively affected improvement in vascular stiffness.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.968-969
• /
• 2011

본 연구에서는 고고도 모사용 2차목 초음속 디퓨져의 특성을 알아보았고 작동 원리를 고찰하였다. STED의 경우 원통형 디퓨져보다 효율적으로 진공환경을 모사할 수 있는 것으로 알려져 있으므로 STED를 해석하였다. STED의 경우 디퓨져의 직경이 노즐 출구보다 크므로 노즐 배기는 디퓨져의 입구에 맞게 팽창되므로 그에 따라 배압이 감소함을 알 수 있었고 최초의 충격파가 보다 강도가 낮은 경사충격파로 바뀌면서 그에 따라 압력이 회복되어 디퓨져가 작동됨을 알 수 있었다.

• Wind and Structures
• /
• 제12권1호
• /
• pp.1-19
• /
• 2009

In this paper, the airflow around an ideal thin plate (hereafter referred to as ITP) with various ratios of central slot is simulated by using the finite-difference-method (FDM)-based Arbitrary-Lagrangian-Eulerian descriptions for the rigid oscillating body. The numerical procedure employs the second-order projection scheme to decouple the governing equations, and the multigrid algorithm with three levels to improve the computational efficiency in evaluating of the pressure equation. The present CFD method is validated through comparing the computed flutter derivatives of the ITP without slot to Theodorsen analytical solutions. Then, the unsteady aerodynamics of the ITP with and without central slot is investigated. It is found that even a smaller ratio of central slot of the ITP has notable effects on pressure distributions of the downstream section, and the pressure distributions on the downstream section will further be significantly affected by the slot ratio and the reduced wind speeds. Continuous increase of $A_2^*$ with the increase of central slot may be the key feature of the slotted ITP. Finally, flutter analyses based on the flutter derivatives of the slotted ITP are performed, and moreover, flutter instabilities of a scaled sectional model of a twin-deck bridge with various ratios of deck slot are investigated. The results confirm that the central slot is effective to improve bridge flutter stabilities, and that the flutter critical wind speeds increase with the increase of slot ratio.

• 설비공학논문집
• /
• 제10권1호
• /
• pp.66-78
• /
• 1998

Adequate ventilation with the proper amount of air to the right place is important factor to achieve a good Indoor air climate. Thus it is of prime importance that the ventilation system is working properly. This requires reliable pressure loss calculation to balance the air flow through duct systems. So a computer program for balancing CAV duct system is developed In this study. The results of CAV duct system is compared with the "Balans" code developed by Larsen from Norway. To obtain the pressure drop characteristics of damper at duct terminal, some experiments are performed using DPM(Dual Pressure Measurement) system. To adjust the resistance of damper, present study suggests that some special diffusers should be designed and damper producers should give the data of air flow vs. pressure drop to the customs when they manufacture the damper. One of the results concludes that the working time can be reduced from several minutes to several seconds per damper in the present experimental site, if the DPM system and the air volume adjusting process are used.

• 한국지열·수열에너지학회논문집
• /
• 제15권4호
• /
• pp.46-54
• /
• 2019

In this study, the performance of a shell and tube heat exchanger (STHE) and welded plate heat exchanger (WPHE) was measured experimentally. The pass numbers of the STHE was changed by 1, 2 and 4. As a result, the WPHE showed 2.1 times higher heat exchange capacity than that of the STHE. In case of pressure drop, the STHE with 1 and 2 pass number has a lower pressure drop than the WPHE, while the STHE with 4 pass presented higher pressure drop than the WPHE. The performance index considering the heat exchange capacity and pump consumption power, showed in oder of STHE_Pass1 > STHE_Pass2 > W PHE > STHE_Pass4 under the same flow rate. Therefore, when the WPHE was designed optimally under same operating condition with STHE, the maintenance fee and space can be reduced effectively by using the WPHE.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.831-838
• /
• 2004

To study on mechanical characteristics of weathered granite masses are difficult because of undisturbanced sampling and in-situ test. Generally, pressuremeter test is widely used to investigate the behavior of weathered rock masses. However, it has many problems to get a limit pressure because of cavity collapse, membrane damage, ete. This study aims to evaluate the mechanical characteristics of weathered granite masses using in-situ pressuremeter test and numerical analysis depending on the ratio of length and diameter of the membrane(L/D=5, 8, 10, 15, 20). Test results and data are shown that strength parameters are reduced exponentially varing weathering degree, and numerical analysis results are approximately coincided with the test results. And the ratio of length and diameter of the membrane arc not affected the parameters such as modulus of pressuremeter, shear modulus, etc. But limit pressure is increased decreasing membrane length based on numerical analysis. On the other hand, increasing the membrane length, yield pressure is decreased and plastic radius is increased in the case of same weathering degree.

• 한국의류산업학회지
• /
• 제6권4호
• /
• pp.485-491
• /
• 2004

The purpose of this study is to analyze the wearing fitness of middle aged women's jacket with non-Stretchable Fabric and stretchable fabric. We surveyed the size of jackets and process of pattern making with stretchable fabric in companies which produce the clothing mainly for middle aged women. Based upon the result of process of pattern making, two kind of experimental jacket with non-stretchable and stretchable fabric were made. We measured space length between body and garment using 3D scanner and analyzed the clothing pressure 7 parts of body with 3 kinds of arm raising. The result were as follows : 1. Most parts of space length except bust were higher in non-stretchable jacket than in stretchable jacket. 2. Clothing pressure showed greater value with non-stretchable fabric jacket than with stretchable fabric jacket. Clothing pressure in upper arm point areas increased as the angle of the arm raising increased. Therefore, the sleeve width and armhole depth should he considered when the amount of wearing ease were reduced in jacket with stretchable fabric.

• 한국공작기계학회논문집
• /
• 제10권2호
• /
• pp.29-37
• /
• 2001

The application of laser in pipelines was started from the base of using laser in nuclear facilities industries and power plants. Because laser can be delivered to a remote area without any difficulties, the application of laser in many industries can solve many difficulties from limitation of access in danger area and reduced the risks of workers. Therefore, we developed a new experimental technique to measure internal defects of pressure vessels with a combination of shearog-raphy and image processing technique. Conventional NDT methods have been taken relatively much time, money and manpower because of performing as the method of contact with objects to be inspected. But digital shearography is laser-based optical method which allows full-field observation of surface displacement derivatives. This method has many advantages in practical use, such as low sensitivity to environmental noise, simple optical configuration and real time mea-surement. In this paper, we find the optimum shearing magnitude with EFM and experiment and measured internal crack length of the pressure vessels at a real time and estimated the error of the results.