• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.273-278
• /
• 2002

The characteristics of tip vortex within a blade tip region were examined experimentally in various flow coefficients by the way of changing tip clearance and blade stagger angle in an axial Low Speed Research Compressor(LSRC). The objective was to identify the unsteady pressure distribution in the blade passage by ensemble average technique acquired from high-frequency response pressure transducers and the tip vortex by root mean square value(RMS value). Data were reduced statistically using phase-lock technique for detailed pressure distributions.

• Structural Engineering and Mechanics
• /
• 제45권6호
• /
• pp.853-865
• /
• 2013

Inflatable panels made of modern and new textile materials can be inflated at high pressure to have a high mechanical strength. This paper is based on the finite element method as a general solution to determine the characteristics of deformed inflatable panels at high pressure in various end and loading conditions. Proposed method is based on the construction of weak form of formulation and application of Reduced Integration Element method (RIE) to solve the numerical problem of shear locking. The numerical results are validated as an outcome of comparison with other published results.

• 한국안전학회지
• /
• 제8권4호
• /
• pp.16-20
• /
• 1993

The combined effect of increased pressure/temperature and the reduced material thicknesses act to increase the stress on the radiator componets. The design life of the radiator is influenced by the cyclic stresses and corrosion, which act to weaken the materials, radiator mechanical failure occurs when a tube or solder Joint ruptures, causing coolant loss or insufficient heat rejection. Therefore, in this study, through strain measurement of the tubes in copper/brass radiator, the strain distribution of the tubes in radiator as function of temperature and pressure is obtained.

• 한국식품영양학회지
• /
• 제26권1호
• /
• pp.60-65
• /
• 2013

압력별(760, 560, 360, 160 mmHg)에 따른 감자튀김의 품질변화를 호화도, 수분 지방 함량 변화, Texture 측정, 관능평가를 통해 알아보았다. 압력별(760, 560, 360, 160 mmHg)에 따라 감자튀김의 호화도는 각각 60.0, 60.0, 60.0 및 58.0%로 유의적인 차이가 없었다. 수분 함량은 네 압력 조건에서 모두 감소하는 반면, 지방 함량은 약 2.5배 이상 증가하는 경향을 나타내었다. 조직감에서는 경도(Hardness)가 5.5 N으로 160 mmHg가 가장 좋았으며, 상압인 760 mmHg가 3.3 N으로 가장 낮은 값을 나타내었다. 점착성(adhesiveness)과 탄력성(springiness)에서는 네 압력 모두 유사한 값을 나타내었지만, 부서짐성(fracturability)에서는 160 mmHg가 3.64값으로 다른 압력과 비교해 큰 차이로 높은 값을 나타내었다. 관능검사 결과에서는 색(갈색도), 맛, 바삭한 정도의 조직감에서 160 mmHg가 가장 높은 값을 나타내었으며, 전체적인 기호도는 압력이 낮을수록 높은 값을 나타내었다. 이상에서 살펴본 것과 같이 감압 상태로 감자를 튀김 조리하였을 때, 튀김의 호화 정도나 수분 지방 함량에 있어서는 일반 상압 조건 하의 튀김과 유사하면서 관능적인 측면에서 기호도가 높기 때문에 제품으로 적용할 가능성이 있다고 사료된다. 이를 위해서는 영양적인 성분 변화에 대한 연구도 더 진행되어야 하고, 경제적인 측면도 고려되어야 할 것이다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권4호
• /
• pp.338-353
• /
• 2016

Information on the surge behaviors and stall stagnation boundaries for a nine-stage axial flow compressor are summarized on the basis of analytical data in comparison with those for a single-stage one, with attention to the pressure ratio effect. The general trends of the surge loop behaviors of the pressure-mass flow are similar for both compressors including the fact that the subharmonic surges tend to appear very near the stall stagnation boundaries. With respect to the nine-stage compressor, however, the mild loops in the subharmonic surges tend to be very small in size relative to the deep loops, and at the same time, insufficient surge recovery phenomenon, which is a kind of subharmonic surge, appears also far from the stagnation boundary for relatively short delivery flow-paths. The latter is found to be a rear-stage surge caused by unstalling and re-stalling of the rear stages with the front-stages kept in stall in the stalled condition of the whole compressor, which situation is caused by stage-wise mismatching in the bottom pressure levels of the in-stall multi-stage compressor. The fundamental information on the stall stagnation boundaries is given by a group of normalized geometrical parameters including relative delivery flow-path length, relative suction flow-path length, and sectional area-pressure ratio, and by another group of normalized frequency parameters including relative surge frequencies, modified reduced resonance frequencies, and modified reduced surge frequencies. Respective groups of the normalized parameters show very similar tendency of behaviors for the nine-stage compressor and the single-stage compressor. The modified reduced resonance frequency could be the more reasonable parameter suggesting the flow-induced oscillation nature of the surge phenomena. It could give the stall stagnation boundary in a more unified manner than the Greitzer's B parameter.

• 대한화장품학회지
• /
• 제44권4호
• /
• pp.381-388
• /
• 2018

저온 감압 조건에서 얻어진 천년초 추출액의 여러 특성을 살펴보고, 이 추출액을 보습제로 활용한 에센스 화장품을 제조하였다. 천년초 추출액은 다른 보습제인 글리세린, 히알루론산 1% 용액에 비해 표면장력(25 mN/m)과 접촉각($8^{\circ}$)이 매우 낮은 값으로 나타났다. 또한 점도도 낮고 끈적임이 거의 없는 특성을 보였다. 천년초 저온감압 추출액은 별도의 계면활성제 첨가 없이도 물에 적은 양의 오일을 유화시킬 수 있었다. 다른 보습제와 달리, 화장품 에센스에서 천년초 추출액의 함량이 높을수록 제형의 끈적임과 점도는 감소하는 결과가 나타났다. 이러한 결과들로부터 천년초 저온 감압 추출액이 수분감과 함께 끈적임이 적은 사용감을 부여하는 천연 보습제로 활용이 가능함을 알 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제26권4호
• /
• pp.193-197
• /
• 2005

Shunt valves used to treat patients with hydrocephalus were tested to investigate influence of intracranial pressure pulsation on their flow control characteristics. Five commercial shunt valves were tested in the flow loop that simulates pulsed flow under pressure pulsation. As 20cc/hr of flow rate was adjusted at a constant pressure, application of $40mmH_2O$ of pressure pulse increased the flow rate by $67.9\%.$ As a 90cm length catheter was connected to the valve outlet, increase in the flow rate was substantially reduced to $17.5\%.$ As the flow rate was adjusted to 40cc/hr at a constant pressure, increase in the flow rate was $51.1\%$ with the same pressure pulsation of $40mmH_2O$. The results indicated that pressure-flow control characteristics of shunt valves implanted above human brain ventricle is quite different from those obtained by syringe pump test at constant pressures right after manufacture. The influence of pressure pulsation was observed to be more significant at low flow rate and the flexibility of the outlet silicone catheter was estimated to significantly reduce flow increase due to pressure pulsation.

• 한국전기전자재료학회논문지
• /
• 제32권2호
• /
• pp.93-99
• /
• 2019

A pressure sensor is a device that converts an applied physical pressure into an electrical signal. Such sensors have a range of applications depending on the pressure level, from low to high pressure. Sensors that use physical pressure, when compared to those operating under air pressure, are not widely applied as they are inefficient. To solve this problem, graphene oxide, which exhibits good mechanical and electrical characteristics, was used to increase the efficiency of these pressure sensors. Graphene oxide has properties that control the movement of charges within the dielectric. Exploiting these properties, we evaluated the change in electrical characteristics when pressure was applied according to the ratio and thickness of the oxidation graph added to the pressure sensor.

• 한국수소및신에너지학회논문집
• /
• 제34권5호
• /
• pp.497-504
• /
• 2023

This study analyzes pressure distribution and pressure drop in the receptacle used in charging system of hydrogen fuel cell vehicles. The objective is to minimize receptacle-induced pressure drop by redesigning internal flow channels. Through numerical simulations, three receptacle variants are compared with a baseline case. Results show reduced pressure drop in the filter section. However, the check valve section exhibits higher pressure drop, requiring further improvement. By increasing throat diameter, pressure drop is decreased by 28% between inlet and outlet of the receptacle. This study shows the relationship between dynamic pressure and pressure drop, providing a guideline for receptacle performance optimization. The redesigned receptacle offers potential for enhancing hydrogen charging efficiency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1717-1719
• /
• 1999

The chief advantage of polymer arrester. from design of pressure relief, anti-contamination, electrical failure was reduced by outdoor polymer housing. In the first for development of pressure relief design for polymer arrester, fault current and surge were studied through experiments of electrical. Designed the FRP inner tube and unit modules for pressure relief housing. Tested the performance of unit modules for pressure relief of polymer arrester, and the result was successful. The pressure relief of polymer arrester depend on design pattern of diamond shape and ellipse. Study on the pressure relief of FRP inner tube for outdoor polymer arrester. Designed and manufactured FRP inner tube of polymer arrester. Tested the fault current of polymer arrester per 10 kA, 10 cycle.