• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.633-637
• /
• 2001

Local anesthesia procedure in pediatric dentistry using needle-tipped syringes is stressful and painful for the child patients The Syrijet Mark II (Mizzy Inc. USA) is a jet injection instrument, which uses high pressure to propel fluids into soft tissue without the use of a hollow neeldle, so it seems to be able to reduce the injection phobia of the child patients. The authors compared the Syrijet with the conventional syringe by assessing the pain level after local anesthetic procedures using CAS(color analogue scale) which was developed from VAS(visual analogue scale). The result showed that the pain was reduced by the use of syrijet. The advantages of syrijet were no use of neeldes, the reuse of the anesthetic cartridge, and the safety to nerves and vessels. The disadvantages were the large size, the high price, and the need of skill to use.

• Korean Journal of Materials Research
• /
• v.18 no.4
• /
• pp.169-174
• /
• 2008

The structural and electrical properties of amorphous $BaSm_2Ti_4O_{12}$ (BSmT) films on a $TiN/SiO_2/Si$ substrate deposited using a RF magnetron sputtering method were investigated. The deposition of BSmT films was carried out at $300^{\circ}C$ in a mixed oxygen and argon ($O_2$ : Ar = 1 : 4) atmosphere with a total pressure of 8.0 mTorr. In particular, a 45 nm-thick amorphous BSmT film exhibited a high capacitance density and low dissipation factor of $7.60\;fF/{\mu}m2$ and 1.3%, respectively, with a dielectric constant of 38 at 100 kHz. Its capacitance showed very little change, even in GHz ranges from 1.0 GHz to 6.0 GHz. The quality factor of the BSmT film was as high as 67 at 6 GHz. The leakage current density of the BSmT film was also very low, at approximately $5.11\;nA/cm^2$ at 2 V; its conduction mechanism was explained by the the Poole-Frenkel emission. The quadratic voltage coefficient of capacitance of the BSmT film was approximately $698\;ppm/V^2$, which is higher than the required value (<$100\;ppm/V^2$) for RF application. This could be reduced by improving the process condition. The temperature coefficient of capacitance of the film was low at nearly $296\;ppm/^{\circ}C$ at 100 kHz. Therefore, amorphous BSmT grown on a TiN substrate is a viable candidate material for a metal-insulator-metal capacitor.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.723-729
• /
• 2005

Volatile compounds of dropwort (Oenanthe javanica DC), crown daisy (Chrysanthemum coronarium L. var. spatiosum), and sesame (Sesamum indicum L.) were isolated by steam distillation under reduced pressure (DRP) and liquid-liquid continuous extraction (LLE). Aroma extracts of the plants were identified by gas chromatography (GC) and gas chromatography/mass spectrometry (GC/MS) and their antioxidant activities were evaluated in two different assays. The aroma extracts isolated from dropwort, crown daisy, and sesame inhibited the oxidation of hexanal by 25%, 95%, and 99%, respectively, for one month at the $500{\mu}g/mL$ level. They inhibited malonaldehyde formation from cod liver oil by 48%, 54%, and 29%, respectively, at the $500{\mu}g/mL$ level. Their antioxidant activities were comparable to those of the natural antioxidant, ${\alpha}-tocopherol$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.733-739
• /
• 2009

Recently it is being increased rapidly to install magnetic marker and RFID tag on the underground utility lines before backfilling to ensure effective it's management. However, due to changes an attitude and damages of sensors. By pressure and vibration during soil compacting, detecting rate is significantly reduced as well as it allows to use only one line of various pipes since it has an unique frequency. Also it is required too long time to reach to target point with an non-accurate navigational GPS receiver and hard to update existing data base with a manual input of new data in the field. To improve these problems, the researcher developed the field management system that apply with ball typed self-levelling marker which is free from the changes of attitude for sensors during compaction as well as has various radio frequency applicable to many kind of pipes and ensure fast positioning to target point using an incorporated system with PDA based DGPS receiver which allows loading a field GIS software and RFID detector. Further, it provides with viewing all of RFID data on the DGPS receiver screen directly and also input new data to existing data base in the field automatically.

• Membrane Journal
• /
• v.21 no.4
• /
• pp.360-366
• /
• 2011

The effect of cross-flow velocity and transmembrane pressure (TMP) on membrane fouling was observed from pilot-scale operation of thermophilic anaerobic membrane bioreactor (AnMBR) treating food waste leachate. It was found that fouling rate was reduced significantly as cross-flow velocity increased at constant TMP mode of operation while this effectiveness was more pronounced at lower TMP. Higher TMP resulted in less permeable fouling layer possibly due to compressibility of foulant material on membrane surface. Particle sizes of membrane concentrate ranged from 10 to $100{\mu}m$, implying that shear-induced diffusion enhance back transport of these particle sizes away from the membrane effectively. From the continuous operation of AnMBR, it was confirmed that shear rate played an important role in the reduction of membrane fouling. Membrane autopsy works at the end of operation of AnMBR showed clearly that both organic and inorganic fouling were significant on membrane surface. Surface shear by cross-flow velocity was expected to be less effective to remove irreversible fouling which can be mainly caused by the adsorption of organic colloidal materials into membrane pores.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.261-267
• /
• 2009

Polyimide which is the glassy polymer has high chemical resistance, thermal stability and high mechanical property. In this study, the polyimide hollow fiber membranes were prepared by the dry-jet wet phase inversion in order to investigate the permeation porperties of the $H_2S$ and $CH_4$. The morphology of prepared hollow fiber membranes and their permeation behaviors of $H_2S$ and $CH_4$ before and after silicon coating were evaluated. The permeance of $H_2S$ and $H_2S/CH_4$ selectivity increased due to plasticization with increasing the feed pressure. The permeance of KSM03b and selectivity of KSM03d were highest among the three type membranes used this experiments. The permeance decreased but the $H_2S/CH_4$ selectivity increased with increasing the air gap. The permeance reduced after silicon coating. However, the selectivity increased and the selectivity of KSM03d was 275 at 7 atm.

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.961-968
• /
• 1998

In order to investigate the effects of substrate bias voltage on the formation of$ZnS-SiO_2$ protective film in phase change optical disk by R.F. magnetron sputtering method, thin dielectric film was formed on Si wafer and Corning glass by using ZnS(80mol%)-$SiO_2$(20mol%)t arget under argon gas. In this study, the Taguchi experimental method was applied in order to obtain optimum conditions with reduced number of experiments and to control numerous variables effectively. At the same time this method can assure the reproducibility of experiments. Optimum conditions for film formation obtained by above method were target RF power of 200 W. substrate RF power of 20 W, Ar pressure of 5 mTorr. sputtering time of 20 min.. respectively. The phase of specimen was determined by using XRD and TEM. The compositional analysis of specimen was performed by XPS test. In order to measure the thermal resistivity of deposited specimen, annealing test was carried out at $300^{\circ}C$ and $600^{\circ}C$. For the account of void fraction in thin film, the Bruggeman EMA(Effective Medium Approximation) method was applied using the optical data obtained by Spectroscopic Ellipsometry. According to the results of this work, the existence of strong interaction between bias voltage and sputtering time was confirmed for refractive index value. According to XRD and TEM analysis of specimen, the film structure formed in bias voltage resulted in more refined structures than that formed without bias voltage. But excess bias voltage resulted in grain growth in thin film. It was confirmed that the application of optimum bias voltage increased film density by reduction of void fraction of about 3.7%.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09c
• /
• pp.72-77
• /
• 2010

The Incheon Bridge, which was opened to the traffic in October 2009, is an 18.4 km long sea-crossing bridge connecting the Incheon International Airport with the expressway networks around the Seoul metropolitan area by way of Songdo District of Incheon City. This bridge is an integration of several special featured bridges and the major part of the bridge consists of cable-stayed spans. This marine cable-stayed bridge has a main span of 800 m wide to cross the vessel navigation channel in and out of the Incheon Port. In waterways where ship collision is anticipated, bridges shall be designed to resist ship impact forces, and/or, adequately protected by ship impact protection (SIP) systems. For the Incheon Bridge, large diameter circular dolphins as SIP were made at 44 locations of the both side of the main span around the piers of the cable-stayed bridge span. This world's largest dolphin-type SIP system protects the bridge against the collision with 100,000 DWT tanker navigating the channel with speed of 10 knots. Diameter of the dolphin is up to 25 m. Vessel collision risk was assessed by probability based analysis with AASHTO Method-II. The annual frequency of bridge collapse through the risk analysis for 71,370 cases of the impact scenario was less than $0.5{\times}10^{-4}$ and satisfies design requirements. The dolphin is the circular sheet pile structure filled with crushed rock and closed at the top with a robust concrete cap. The structural design was performed with numerical analyses of which constitutional model was verified by the physical model experiment using the geo-centrifugal testing equipment. 3D non-linear finite element models were used to analyze the structural response and energy-dissipating capability of dolphins which were deeply embedded in the seabed. The dolphin structure secures external stability and internal stability for ordinary loads such as wave and current pressure. Considering failure mechanism, stability assessment was performed for the strength limit state and service limit state of the dolphins. The friction angle of the crushed stone as a filling material was reduced to $38^{\circ}$ considering the possibility of contracting behavior as the impact.

• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1350-1356
• /
• 1998

An attempt was made to investigate the effects of additives (3%) such as egg white, soybean protein, corn starch and Read Amity-N (green bean starch 85%+psyllium husk 10%) on the thermal properties and gel structures of mackerel surimi and to examine the quality of surimi by using differential scanning calorimetry (DSC), rheometry and scanning electron microscopy (SEM). The thermal transition temperatures of mackerel surimi protein were 40, 52, 67 and $79^{\circ}C$ after those temperatures were changed to 37, 46, 57 and $76^{\circ}C$ after adding salt (3% NaCl). Addition of Read Amity-N and corn starch to surimi showed new peak at the temperature of $90^{\circ}C\;and\;92^{\circ}C$, respectively. The enhancing effects of gel strengths of mackerel surimi cooked gels prepared from adding four kinds of additives, respectively, were egg white > soybean protein > Read Amity-N > corn starch in order. Scanning electron microscopy showed a difference in fine structures between the cooked gels which were prepared with and without additives. Dispersion profiles of protein were more thick in cooked gel prepared with additive than in cooked gel prepared without additive.

• The Korean Journal of Pharmacology
• /
• v.20 no.2
• /
• pp.59-71
• /
• 1984

To explore the regulatory roles of CNS on the renal function, clonidine, a specific presynaptic ${\alpha}-adrenoceptor$ agonist, was administered into a lateral ventricle of the brain (icv) and the changes of renal function were studies in urethane-anesthetized rabbits. $5{\mu}g/kg$ icv elicited no significant changes in renal function. However, $15{\mu}g/kg$ induced marked natriuresis and kaliuresis for 20 min. Neither RPF nor GFR changed significantly. The fractional sodium reabsorption was significantly reduced, indicating that the renal action was of the tubular origin. Changes of systemic blood pressure were not contributory to the renal action. Yohimbine, a specific antagonist for presynaptic ${\alpha}-adrenoceptor$, when given icv in doses of $100{\mu}g/kg$ 20 min prior to clonidine, completely abolished the renal action of icv clonidine. Yohimbine icv did not produce any significant changes in renal function. Intravenous clonidine, $15{\mu}g/kg$, elicited antidiuresis and decrement of renal function immediately after administration, followed by a slight tendency toward natriuresis, but no natriuresis corresponding to those seen after the icv clonidine were observed, indicating that in the renal action of icv clonidine no direct action is involved. These observations indicate that the central sympathetic tone plays a role in the regulation of renal function in the rabbit.