• Korean Journal of Food Science and Technology
• /
• v.19 no.5
• /
• pp.403-408
• /
• 1987

The effects of gamma irradiation on microbiological and chemical qualities of four kinds of poultry feeds were investigated. The viable counts of total bacteria in the samples were $10^5\;to\;10^6/g$. They were reduced by 2 to 3 log cycles after 3 to 5 kGy irradiation, and were completely eliminated with irradiation of 7 kGy. Coliforms and enteric pathogens were contaminated in high levels in all samples, ranging from $1.2{\times}10^4\;to\;1.7{\times}10^5/g\;and\;4.0{\times}10\;to\;2.6{\times}10^3/g$, respectively, They were sterilized by 3 to 5 kGy irradiation. Fungi, ranging from $10^{2}\;to\;10^4/g$, mainly osmophiles were identified as Aspergillus and Penicillium. They were eliminated to a undetectable level by 5 to 10 kGy irradiation. Six kinds of species, including Aspergillus flavus, were potential mycotoxin producers. Chemical components, such as proximate compositions, and mineral contents were not affected by the gamma irradiation. However, TBA values and amino acid content seemed to be affected by gamma irradiation.

• Korean Journal of Materials Research
• /
• v.18 no.10
• /
• pp.547-551
• /
• 2008

Crack-free joining of $Si_3N_4\;and\;Al_2O_3$ using 15 layers has been achieved by a unique approach introducing Sialon polytypoids as a functionally graded materials (FGMs) bonding layer. In the past, hot press sintering of multilayered FGMs with 20 layers of thickness $500{\mu}m$ each has been fabricated successfully. In this study, the number of layers for FGM was reduced to 15 layers from 20 layers for optimization. For fabrication, model was hot pressed at 38 MPa while heating up to $1700^{\circ}$, and it was cooled at $2^{\circ}$/min to minimize residual stress during sintering. Initially, FGM with 15 layers had cracks near 90 wt.% 12H / 10 wt.% $Al_2O_3$ and 90 wt.% 12H/10 wt.% $Si_3N_4$ layers. To solve this problem, FEM (finite element method) program based on the maximum tensile stress theory was applied to design optimized FGM layers of crack free joint. The sample is 3-dimensional cylindrical shape where this has been transformed to 2-dimensional axisymmetric mode. Based on the simulation, crack-free FGM sample was obtained by designing axial, hoop and radial stresses less than tensile strength values across all the layers of FGM. Therefore, we were able to predict and prevent the damage by calculating its thermal stress using its elastic modulus and coefficient of thermal expansion. Such analyses are especially useful for FGM samples where the residual stresses are very difficult to measure experimentally.

• Journal of Korea Water Resources Association
• /
• v.45 no.8
• /
• pp.795-804
• /
• 2012

Recently, changes in rainfall intensity and patterns have been causing increasing soil loss worldwide. As a result, the water ecosystem becomes worse and crops yield are reduced with soil loss and nutrient loss with it. Many studies have been proposed to estimate runoff and soil loss to predict or decrease non-point source pollution. Although the USLE has been used for many years in estimating soil losses, the USLE cannot reflect effects on soil loss of changes in rainfall intensity and patterns. The WEPP, physically based model, is capable of predicting soil loss and runoff using various rainfall intensity. In this study, the WEPP model was simulated for sediment yield, runoff and peak runoff using data of 5, 10, 30, 60 minute term rainfall, Huff's method and design rainfall. In case of rainfall interval of 5 minutes and 60 minutes, the sediment and runoff values decreased by 24% and 19%, respectively. The peak rate runoff values decreased by 16% when rainfall interval changed from 5 minutes to 60 minutes, indicating the peak rate runoff values are affected by rainfall intensity to some degrees. As a result of simulating using Huff's method, all values (sediment yield, runoff, peak runoff) were found to be the greatest at third quartile. According to the analysis under various design rainfall conditions (2, 3, 5, 10, 20, 30, 50, 100, 200, 300 years frequency), sediment yield, runoff, and peak runoff of 906.2%, 249.4% and 183.9% were estimated using 2 year to 300 year frequency rainfall data.

• Research in Plant Disease
• /
• v.14 no.1
• /
• pp.51-56
• /
• 2008

Powdery mildew of lettuce that is a newly reported disease became a threat to organic cultivation of lettuce in Korea since the disease caused by Podosphaera fusca resulted in a half of yield loss in heavily infected fields. To improve micro-environmental conditions around lettuce, ACF (air-circulation fan) was installed on inside roof of plastic house at 6 m intervals. The ACF increased 57% of lettuce yield and reduced 71.4% of lettuce seedling death. COY (cooking oil and yolk mixture) consisted of cooking oil 0.3% and egg yolk 0.08% reduced lettuce seedling death from 89.3% to 92.9% under the greenhouse. Seven-day interval spray of COY resulted in high control values of powdery mildew of lettuce ranging from 89.6% to 96.3%, which was comparable to a fungicide, Azoxystrobin. Lettuce yield was increased about two times compared to a non-treated conventional cultivation. Qualities of lettuce such as hardness and chlorophyll content were also improved by COY and ACF combination. Effect of COY on control of the disease was improved when $CaCO_3$ or $SiO_2$ 1,000 ppm was supplemented. Results indicated that the COY made of cooking oil such as canola emulsified with yolk was highly effective on control of powdery mildew of lettuce and suitable for organic agriculture, especially when combined with ACF.

• 한국균학회소식:학술대회논문집
• /
• 2014.05a
• /
• pp.19-19
• /
• 2014

This study included the analysis of mushroom data collected from Mt. Chiak in Gangwon-do using various methods. Former studies of Korean mushrooms are limited by regional characters and there is less species diversity among the regions. This study tried to find a way for the forecast of mushroom distribution and appearance by indexes of species diversity. The indexes used in this study include the number of fungi (N), the number of species (S), similarity index (C), richness index (R1, R2), variety index (V1, V2), evenness index (E1, E2, E3, E4, E5), and dominance index (D1) to analyze variety of species diversity. Analyses of data of fungi using a multistage cluster sampling indicate that the average value of C for years was higher than the average value of C for areas. The mushrooms consisted of 208 species in 686 individuals in limited fungal collection from 2002 to 2003. One hundred thirty nine species in 393 individuals were collected in 2002, and 122 species 293 individuals were collected in 2003. The individuals collected in 2003 were smaller than 2002's individuals. Similarity, richness, and variety indexes' values of 2003 were reduced than 2002's values but dominance index of 2003 was increased than 2002's value. Generally the species diversity of the environment to evaluate the index of similarity, richness, and variety was a higher index; dominance index was lower than that of the surrounding environment, suggesting a good diversity. As a result, the occurrence of mushrooms in the surrounding environment and the various factors seem fell in 2002 compared to 2003. The majority genus of the limited fungal collection was Mycena genus in 63 individuals; the majority species was Laccaria laccata in 34 individuals. Ninety three species in 106 individuals were collected by the extended collection and the majority genus of the extended collection was Amanita genus in 17 individuals; the majority species was Amanita citrina (Schaeff.) Pers. which was found in 5 individuals. This demonstrates that periodical similarity's value was 0.159 is higher than special similarity's 0.119. This indicates that the probability of the appearance of same mushrooms in the same area in following year is higher than the probability of the appearance of same mushrooms in the surrounding area in same year. The value of coefficient of variation (CV), in which the amount of change is much or less by N is higher than the CV value by S. CV value of dominance index(D) was the highest r point among other indexes, and evenness index (E) was the lowest point among other indexes. The correlation matrix with 66 combinations between the indexes, the combinations with correlations was 46 combinations. These results revealed that indexes of R1, V2, and E1 were proper to represent species diversity of fungi based on the correlation matrix and the theory of statistical independence which means there is no or less mutual association. This research would contribute to the study about variable living creature by measuring method and in the future this would be used to figure out regulation about fungi with their correlation, values in ecosystem, develop improving new models about agricultural fungi species and numbers by investigating agricultural variable species.

• The Korean Journal of Pesticide Science
• /
• v.13 no.4
• /
• pp.315-324
• /
• 2009

For the environmental friendly management of diamondback moth, Plutella xylostella (L.), Bacillus thuringiensis subsp. kurstaki ($30{\times}10^8\;cfu/mg$) and neem oil (0.5% azadirachtin) were used as green control agencies with mixed and alternative treatments on the chinese cabbage. When Bacillus thuringiensis subsp. kurstaki was applied to 1st and 2nd larva of P. xylostella with recommended concentration, their mortalities were reached to 100% by 2 days after treatment. In case of azadirachtin, its effect of mortality was continued for 7 days, and reached to 100% mortality. $LC_{50}$ values of Bacillus thuringiensis subsp. kurstaki and azadirachtin against 1st, 2nd, 3rd and 4th larva of P. xylostella were $2.8{\times}10^4$, $3.1{\times}10^4$, $3.4{\times}10^4$ and $1.5{\times}10^5\;cfu/ml$, and 2.7, 3.9, 4.7 and 7.1 ppm, respectively. The number of laid eggs of P. xylostella was reduced to 57.5 at 25 ppm of azadirachtin compared with control treatment. The hatch ratio was not significantly different with Bacillus thuringiensis subsp. kurstaki treatment in comparison with control treatment. However, when azadirachtin was applied, their hatch ratio were reduced to 25.8 and 45.4% at 25 and 50 ppm, respectively. On the other hand, emergence rate of eggs was not different with Bacillus thuringiensis subsp. kurstaki treatment, but 45.4% was shown in azadirachtin treatment with 50 ppm in comparison with control. When the mixture with Bacillus thuringiensis subsp. kurstaki and azadirachtin was applied to adults of P. xylostella, their mortality was higher than Bacillus thuringiensis subsp. kurstaki treatment only. These results are supposed that the mixture of Bacillus thuringiensis subsp. kurstaki and azadirachtin might be used as green control agents for reducing the demage of diamondback moth in the Chinse cabbage.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.549-557
• /
• 2006

The characteristics of supercritical water oxidation have been studied to decompose the waste anionic exchange resins which were produced from a power plant. The waste resins from a power plant were mixture of anionic and cationic exchange resins. The waste anionic exchange resins had been separated from the waste resins using a solid-liquid fluidized bed. It was confirmed that the cationic exchange resins were not included in the separated anionic exchange resins by the elemental and thermogravimetric analysis. A slurry of anionic exchange resins which could be fed continuously to a supercritical water oxidation apparatus by a high pressure pump was prepared using a wet ball mill. Although the COD of liquid effluent had been reduced more than 99.9% at 25.0 MPa and $500^{\circ}C$ within 2 min, the total nitrogen content was reduced only 41%. The addition of nitric acid to the slurry could reduce the total nitrogen content in treated water. The central composite design as a statistical desist of experiments had been applied to optimize the conditions of decomposing anionic resin slurry by means of the COD and total nitrogen contents in treated waters as the key process output variables. The COD values of treated waters had been reduced sufficiently to $99.9{\sim}100%$ af the reaction conditions of $500{\sim}540^{\circ}C$, 25.0 MPa within 2 min. The effects of temperature and nitric acid concentration on COD were not significant. However, the effect of nitric acid concentration on the total nitrogen was found to be significant. The regression equation for the total nitrogen had been obtained with nitric acid concentration and the coefficient of determination($r^2$) was 95.8%.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.4
• /
• pp.11-20
• /
• 2010

This study carried out a Mock-up test to apply Low-heat Cement (CF) that is adjusted to a fineness of $3,000\;{\pm}\;200\;cm^2/g$ by substituting Coarse particle Cement (CC) and fly ash with ordinary Portland Cement (OPC), then applied it on-site. The result of the test is as follows. The Mock-up test showed that the amount of admixture in CF increased SP agent and AE agent slightly more compared to OPC, while temperature history showed that the highest temperature of CF was around $6{\sim}10^{\circ}C$ lower than that of OPC. Compressive strength in CF was low compared to that of OPC, but the strength width became narrow at the age of 28 days, which is not considered to be significant. In on-site application, slump, air content and chloride content all satisfied the target values, while the temperature history showed that the highest temperature in the center by each cast was about $34^{\circ}C$ in the first cast, $42^{\circ}C$ in the second cast, and $39^{\circ}C$ in the third cast. Compressive strength of specimen for strut management showed low value compared to standard curing, but its strength was reduced at the age of 28 days.

• Korean Journal of Environmental Biology
• /
• v.30 no.3
• /
• pp.238-244
• /
• 2012

Toxic effects of heavy metal (Pb, Cr, As) were examined by the hatching rates of fertilized eggs in the oliver flounder, Paralichthys olivaceus. Eggs were exposed to Pb, Cr, As (0, 10, 100, 500, 1,000, 2,500, 5,000 ppb) and then normal hatching rates were investigated after 48 h. The normal hatching rates in the control condition (not including heavy metal) were greater than 80%, but suddenly decreased with increasing of heavy metal concentrations. Pb, Cr and As reduced the normal hatching rates in concentration-dependent way and a significant reduction occurred at concentration grater than 100, 100, 500 ppb, respectively. The ranking of heavy metal toxicity was Cr>As>Pb, with $EC_{50}$ values of 415, 518 and 1,029 ppb, respectively. The no-observed-effect-concentration (NOEC) and lowest-observed-effect-concentration (LOEC) show each 100 bbp and 500 ppb of normal hatching rates in exposed to Pb and As. The NOEC and LOEC of normal hatching rates in Cr were 10 ppb and 100 ppb, respectively. From these results, the normal hatching rates of P. olivaceus have toxic effect at greater than the 100 ppb concentrations in Pb, As and the 10 ppb concentrations in Cr in natural ecosystems. These results suggest that biological assay using the normal hatching rates of P. olivaceus are very useful test method for the toxicity assessment of a toxic substance as heavy metal in marine ecosystems.

• Journal of the Korea Concrete Institute
• /
• v.28 no.5
• /
• pp.611-620
• /
• 2016

In the construction of nuclear power plants, only 420 MPa reinforcing bars are allowed and, therefore, so many large-diameter bars are placed, which results in steel congestion. Consequently, re-bar works are difficult and the quality of RC structures may be deteriorated. To solve the steel congestion, 550 MPa bars are necessary. Among many items for verifying structural performance of reinforced concrete with 550 MPa bars, the 43 mm hooked bars are examined in this study. All specimens failed by side-face blowout and the side cover explosively spalled at maximum loads. The bar force was initially transferred to the concrete primarily by bond along a straight portion. At the one third of maximum load, the bond reached a peak capacity and began to decline, while the hook bearing component rose rapidly. At failure, most load was resisted by the hook bearing. For confined specimens with hoops, the average value of test-to-prediction ratios by KCI code is 1.45. The modification factor of confining reinforcement which was not allowed for larger than 35 mm bars can be applied to 43 mm hooked bars. For specimens with 70 MPa concrete, the average value of test-to-prediction ratios by KCI code is 1.0 which is less than the values of the other specimens. The effects of concrete compressive strength should be reduced. An equation to predict anchorage capacity of hooked bars was developed from regression analysis including the effects of compressive strength of concrete, embedment length, side cover thickness, and transverse reinforcement index.