• The Journal of Engineering Geology
• /
• v.12 no.4
• /
• pp.471-484
• /
• 2002

Alluviums in the Keum River watershed cover an areal extent of $3,029{\;}\textrm{km}^2$ and contain about 8.1 billion tons of groundwater. However, the waters are severely polluted by nitrate, possibly due to the application of nitrogen fertilizer (>250 N kg/ha) on agricultural land. This paper aims to elucidate the pollution status and behaviors of nitrate in alluvial groundwaters in the Keum River watershed area, based on regional hydrogeochemical study. Most of the collected samples (n = 186) are polluted by nitrate (average = 42.2 mg/L, maximum = 295 mg/L). About 29% of the samples have the nitrate concentrations exceeding Korean Drinking Water Standard (44 mg/L $NO_3$). The distribution of nitrate concentrations in the study area is largely dependant on geochemical environments of alluvial aquifers. In particular, the decrease of redox potential of alluvial groundwaters showed a good correlation with the decreases of nitrate, iron, and manganese concentrations. Thus, the change of redox state in alluvial aquifers, likely reflecting their sedimentary environments, controls both the behavior and fate of nitrogen compounds and their natural attenuation (denitrification) in aquifers. A carbon-rich, silty layer within alluvium strata forms a reducing condition and possesses a buffering capacity on nitrate pollution.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.8
• /
• pp.77-83
• /
• 2002

This research aimed at from the establishment of theory on micro electrochemical machining mechanism to the implementation of a practical fabrication system of micro parts. In detail, the mechanism of micro-ECM was investigated with potentiodynamic method and the optimal condition for micro-ECM was selected by voltage-current-time curve with potentiostatic method. From the experimental result, the micro part which has extremely fine surface could be fabricated by use of micro-ECM with point electrode method.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.1
• /
• pp.15-21
• /
• 2000

The catalytic hydroxylation of several cycloalkanes in dichloromethane have been investigated using In(Ⅲ)-, Tl(Ⅲ)-porphyrin complexes as a catalyst and NaClO, $NaClO_{2}$, $H_{2}O_{2}$ as a terminal oxidant. Porphyrins were TPP and ($F_{20}$)TPP (TPP = tetraphenylporphyrin) and substrates were cyclopentane, cyclohexane, cycloheptane and cyclooctane. The substrate conversion yield was discussed according to the substituent effect and hinderance effect of metalloporphyrin and the radius effect of non-redox metal ion. The conversion yield of cycloalkane followed the order of $ C_{5} $ < $ C_{6}$ < $ C_{7}$ = $ C_{8}$. In this experimental condition $NaClO_2$ was rather efficient terminal oxidant than NaClO and $H_{2}O_{2}$.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.453-454
• /
• 2004

Hydrogeochemical and isotopic characteristics were investigated for groundwater of Tertiary basin in southeastern part of Korea where deep drilling is in progress for geothermal investigation. According to geology, aquifer was distinguished as alluvial, tertiary sedimentary bedrock (bedrock groundwater), and fractured volcanic rock (deep groundwater). Groundwater of each aquifer is distinctively separated in Eh-pH conditions and concentrations of Cl, F, B and HCO$_3$. Deep groundwater has very low level 3H and 14C whereas alluvial groundwater has those of recent precipitation level. However one of deep groundwater show mixed characteristics in terms of hydrochemistry which indicates effect of pumping. Deep groundwater have temperature of 38 to 43$^{\circ}C$ whereas bedrock and alluvial groundwater have temperature less than 2$0^{\circ}C$. Fractured basement rock aquifer has different hydrogeologicalsetting from bedrock and alluvial aquifer considering hydrogeochemical and isotopic characteristics, and temperature.

• Journal of Hydrogen and New Energy
• /
• v.4 no.2
• /
• pp.5-15
• /
• 1993

Hydrogen production in visible light with the following semiconductor systems, $CdS-WO_3$, $CdS-TiO_2$, have been investigated in the presence of redox catalyst (Pt, $RuO_2$). MeOH, EtOH, isopropanol, sulfide/sulfite mixture, lactic acid were used as sacrifical reagents. The optimal condition for $H_2$ evolution was found to be in qgueous lactic acid media for $CdS-WO_3/RuO_2$. The photochemical efficiency for this system was 1.05 % and the $H_2$ evolution rate was 26.5ml/min. at $6.07{\times}10^{-5}$ einstein/sec photon rate

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.1
• /
• pp.92-100
• /
• 2000

The model gas reaction tests were carried out to investigate the purification characteristics of methane on the exclusive catalyst for NGV. The experiment was conducted with the factors which affect the conversion efficiency of methane, such as Redox ratio, coexistence components of CO, MO, $H_2$O, precious metals and additives. The catalyst loaded with larger amount of pd and with additive La showed lower light-off temperature. In the presence of CO and NO, the conversion efficiency of methane was varied according to the kind of additive loaded. The conversion efficiency of methane was dropped for the catalyst loaded with La under lean air-fuel ratio, while it increased for the one loaded with Ti+Zr for the same condition. It was shown that the water vapor inhibited methane from oxidation by its poisoning on the surface of catalyst.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1323-1328
• /
• 1998

The electrical conductivities of the yttria (8mol%) stabilizedzirconia-ceria solid solutions were measured as a function of oxygen partial between 80$0^{\circ}C$ and 100$0^{\circ}C$ using 4-probe d.c. method Under pure oxygen atmosphere the oxygen ionic conductivity of CeO2-ZrO2 decreased with the concentration of CeO2 Under reducing condition electronic conduction due to the redox equilibrium of Ce ion was observed. Total ionic and electronic conductivities fitted by a defect model enabled to determine the electronic transference number(tei) which increased with the concentration of CeO2 and with the degree of reduction.

• Nuclear Engineering and Technology
• /
• v.32 no.6
• /
• pp.531-536
• /
• 2000

The extraction of precious metals from aqueous solutions is performed by using a photoredox reaction with a Q-switched Nd:YAG laser. The metallic silver was efficiently precipitated and extracted from the silver nitrate solution by laser photolysis. An optimum reaction condition for silver extraction was determined by adjusting various experimental factors such as type of reducing agent, type of acids and reaction time. The composition of the reaction product was analyzed and it was identified as metallic silver, not other molecular types. The photoreaction of chromium(III) chloride in an acidic aqueous solution was also investigated. The 355 nm laser light was better suited for the reaction of silver nitrate as well as chromium(III) chloride in an acidic solution compared to the 532 nm light.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2016-2018
• /
• 2005

Dye-sensitized solar cell (DSC) consist of oxidation semiconduction electrode, electrolyte and counter electrode. Among these, Pt as counter electrode of DSC plays a role in helping redox reaction of iodine ions in electrolyte, also, transferring electrons into electrolyte. In this case, it is expected that characteristics of Pt electrodes strongly depend on fabrication process and its surface condition. In this study, electrochemical behavior of the electro-plated Pt electrode was compared with that of the sputtered Pt electrode, using cyclic-voltammetry and impedance spectroscopy (PARSTATE 2273, by AMETEK). Surface morphology of Pt electrode was investigated by AFM (XE-100, by PSIA). As a result, it was considered that electrochemical properties of sputtered Pt electrode is superior to that of electro-plated Pt electrode.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.2
• /
• pp.212-217
• /
• 1998

The electrochemistry and valence tautomerism of CoⅢ(N-N)(SQ)(Cat), [N-N=N,N,N',N'-tetramethylethylenediamine (TMEDA); SQ=3,5- or 3,6-di-tert-butyl-semiquinone, Cat=3,5- or 3,6-di-tert-butyl-catechol], have been investigated by spectroscopic, electrochemical, spectroelectrochemical methods in nonaqueous solvents under anaerobic condition. The transition temperature between tautomers is dependent upon the donation effect of substituted quinone ligand and solvent. It increases with the increase of donation effect of solvent and quinone ligand. CoⅢ(TMEDA)(SQ)(Cat) is reduced to [CoⅡ(TMEDA)(SQ)(Cat)]-, and then reduces to [CoⅡ(TMEDA)(Cat)2]2-. CoⅢ(TMEDA)(SQ)(Cat) is oxidized to [CoⅢ(TMEDA)(SQ)2]+, but the stability of the oxidized form in DMF is dependent upon the solution temperature. With the increase of solution temperatrue the oxidized form may be converted to [CoⅡ(TMEDA)(SQ)(BQ)]+ by intramolecular electron transfer from SQ ligand to CoⅢ.