• Computers and Concrete
• /
• 제16권2호
• /
• pp.191-207
• /
• 2015

It is generally accepted that, in the interest of safety, it is essential to provide a minimum level of flexural ductility, which will allow energy dissipation and moment redistribution as required. If one wishes to be uniformly conservative across all of the design variables, curvature ductility and moment redistribution factor should be calculated using a probabilistic method, as is the case for other design parameters in reinforced concrete mechanics. In this study, simple expressions are derived for the evaluation of curvature ductility and moment redistribution factor, based on the concept of demand and capacity rotation. Probabilistic models are then derived for both the curvature ductility and the moment redistribution factor, by means of central limit theorem and through taking advantage of the specific behaviour of moment redistribution factor as a function of curvature ductility and plastic hinge length. The Monte Carlo Simulation (MCS) method is used to check and verify the results of the proposed method. Although some minor simplifications are made in the proposed method, there is a very good agreement between the MCS and the proposed method. The proposed method could be used in any future probabilistic evaluation of curvature ductility and moment redistribution factors.

• 사회복지연구
• /
• 제41권3호
• /
• pp.185-212
• /
• 2010

본 연구는 현재 우리나라에서 대안적 소득보장제도로 제안되고 있는 기본소득(basic income) 모델들의 소득재분배효과를 비교 분석하는 것이 목적이다. 분석 자료는 한국복지패널 3차년도 자료를 활용하였으며, 소득재분배효과는 빈곤율과 5분위 소득배율 그리고 지니계수로 측정하였다. 분석결과 기본소득 모형은 현행의 소득보장 시스템에 비해 소득재분배효과가 높게 나타났다. 또한 기본소득모델은 절대적 빈곤의 문제를 완전히 해소하였다. 기본소득 모델중에서 빈곤감소효과가 큰 것은 정률과세 기본소득 모델이었으며, 소득불평등 감소효과가 큰 것은 차등과세 기본소득 모델이었다. 기본소득 모델이 현행 시스템보다 소득재분배 효과가 큰 것은 투입되는 자원의 양 때문이기도 하지만, 보편주의적인 프로그램이 소득재분배효과가 가장 크다는 '재분배의 역설론' 을 확인해주는 결과이기도 하다. 마지막으로 빈곤감소효과에서는 정률과세 기본소득 모델이 소득불평감소 효과에서는 차등과세 기본소득 모델의 성과가 양호하다는 본 연구의 결과는 기본소득 논의에서 정책목표를 어떻게 설정하느냐에 따라 모델의 설계가 달라질 필요가 있음을 보여주는 결과라 할 수 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.385-388
• /
• 2006

The purpose of this study is to offer an appropriate method of the degree of the flexural moment redistribution for continuous reinforced concrete beams. Twenty-four two-span continuous beams were selected to determine the manner and degree of moment redistribution. The concept of ductility is linked to the moment redistribution capacity and, consequently, the safety of the structure. Knowledge of the plastic rotation capacity of plastic regions of the structure is important for a plastic analysis or a linear analysis with moment redistribution. A nonlinear finite element analysis program named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology) was used to evaluate the ultimate strength and degree of moment redistribution. The nonlinear material model for the reinforced concrete is composed of models for characterizing the behavior of the concrete, in addition to a model for characterizing the reinforcing bars.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.518-523
• /
• 2001

Vortex methods were originally conceived as a tool to model the evolution of unsteady, incompressible, high Reynolds number flows of engineering interest. Recently various methods have been proposed for simulating the diffusion in vortex methods for two-dimensional incompressible flows. We test the diffusion schemes of vortex methods. In this paper we directly compare the particle strength exchange scheme with the vorticity redistribution scheme in tenus of their accuracy and computational efficiency. Comparisons between both viscous models described are presented for short-time runs of impulsively started flows past a circular cylinder for Reynolds number of 60. The particle strength exchange scheme has been shown more accurate and efficient than the vorticity redistribution scheme.

• 한국지반공학회논문집
• /
• 제18권5호
• /
• pp.99-108
• /
• 2002

본 연구에서는 탄성, 탄소성 및 실험을 통해 유도된 비선형-취성-소성 모델을 지하 심부 원형터널의 경우에 적용하여 각 모델에 따른 특성과 추정되는 응력재분배 및 응력교란 범위를 비교하였다. 현지 초기응력의 크기와 주응력차가 커질수록 파괴영 역이 파괴되지 않은 영역에 미치는 응력재분배와 교란의 영향이 증가되기 때문에, 탄소성 또는 탄성 해석의 경우보다 비선형-취성-소성 해석결과에서 응력재분배 및 교란영역, 주응력차와 변위가 더 크게 발생하였다. 따라서 현지 응력 수준과 현지 주응력차가 클 경우, 비선형-취성-소성 해석에 의해 손상영 역의 범위가 더 크게 발생할 것으로 예측되므로 손상해석의 필요성이 증대될 것으로 판단되었다.

• 한국시뮬레이션학회논문지
• /
• 제3권1호
• /
• pp.89-98
• /
• 1994

In this paper, a criteria for selecting an appropriate load redistribution algorithm is devised so that a fault-tolerance distributed system can operte at its optimal efficience. To present the guideline for selecting redistributing algorithms, simulation models of fault-tolerant system including redistribution algorithms are developed using SLAM II. The job arrival rate, service rate, failure and repair rate of nodes, and communication delay time due to load migration are used as parameters of simulation. The result of simulation shows that the job arrival rate and the failure rate of nodes are not deciding factors in affecting the relative efficiency of algorithms. Algorithm B shows relatively a consistent performance under various environments, although its performance is between those of other algorithms. If the communication delay time is longer than average job processing time, the performance of algorithm B is better than others. If the repair rate is relatively small or communication delay time is longer than service time, algorithm A leads to good performance. But in opposite environments, algorithm C is superior to other algorithms.

• 자원환경지질
• /
• 제55권2호
• /
• pp.183-195
• /
• 2022

열수 금광상은 단층대 내에서 일어나는 열수 유체의 폭발적 흐름의 증거이며, 그로 인해 만들어지는 맥의 구조 및 조직은 열수유체 재분배 기작을 반영한다. 본 리뷰 논문에서는 열수 금광상의 형성을 야기하는 지각 내 유체 순환의 기작으로서 석션 펌프와 단층 밸브 모델을 소개하고 단층역학적인 측면에서 검토한다. 석션 펌프와 단층 밸브 모델은 (1) 지구조 응력의 누적과 유체압의 증가, (2) 지진성 단층파열에 따른 지구조 응력의 해소와 유체압의 감소가 주기적으로 발생됨에 따라 단층을 통해 불균질하게 발생하는 유체의 이동 및 맥의 형성 기작이다. 두 기작들이 작동하는 지질학적 환경과 응력 조건은 서로 상이하며, 결과적으로 형성된 맥의 구조 및 조직적 특성은 서로 공통점과 차이점을 가진다. 석션 펌프와 단층 밸브 모델은 향후 한국의 열수 금광상의 구조적 성인을 정교하게 해석하고 추가적인 탐사의 효율성을 제고하는데 유용하게 활용될 수 있을 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제20권6호
• /
• pp.673-693
• /
• 2005

A general step-by-step simulation for the time-dependent analysis of segmentally-erected prestressed concrete box-girder bridges is presented. A three dimensional finite-element model for the balanced-cantilever construction of segmental bridges, including effects of the load history, material nonlinearity, creep, shrinkage, and aging of concrete and the relaxation of prestressing steel was developed using ABAQUS software. The models included three-dimensional shell elements to model the box-girder walls and Rebar elements representing the prestressing tendons. The step-by-step procedure allows simulating the construction stages, effects of time-dependent deformations of materials and changes in the structural system of the bridges. The structural responses during construction and throughout the service life were traced. A comparison of the developed computer simulation with available experimental results was conducted and good agreement was found. Deflection of the bridge deck, changes in stresses and strains and the redistribution of internal forces were calculated for different examples of bridges, built by the balanced-cantilever method, over thirty-year duration. Significant time-dependent effects on the bridge deflections and redistribution of internal forces and stresses were observed. The ultimate load carrying capacities of the bridges and the behavior before collapse were also determined. It was observed that the ultimate load carrying capacity of such bridges decreases with time as a result of time-dependent effects.

• Steel and Composite Structures
• /
• 제11권2호
• /
• pp.149-168
• /
• 2011

This paper presents a computational study of column loss scenarios for typical multi-story steel buildings with perimeter moment frames and composite steel-concrete floors. Two prototype buildings (three-story and ten-story) were represented using three-dimensional nonlinear finite element models and explicit dynamic analysis was used to simulate instantaneous loss of a first-story column. Twelve individual column loss scenarios were investigated in the three-story building and four in the ten-story building. This study provides insight into: three-dimensional load redistribution patterns; demands on the steel deck, concrete slab, connections and members; and the impact of framing configuration, building height and column loss location. In the dynamic simulations, demands were least severe for perimeter columns within a moment frame, but the structures also exhibited significant load redistribution for interior column loss scenarios that had no moment connectivity. Composite action was observed to be an important load redistribution mechanism following column loss and the concrete slab and steel deck were subjected to high localized stresses as a result of the composite action. In general, the steel buildings that were evaluated in this study demonstrated appreciable robustness.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.221-224
• /
• 2008

할선강성을 이용하여 모멘트저항골조의 모멘트재분배를 수행하는 선형해석법을 연구하였다. 제안된 방법에서는 모멘트재분배가 요구되는 부재의 소성힌지에 회전스프링을 모델링한 후, 이 스프링의 할선 강성을 조정하여 비탄성변형으로 인해 저감된 부재의 휨강성을 반영한다. 회전스프링의 할선강성을 조정하여 선형해석한 결과, 해당 부재와 전체 구조물에서 힘의 평형이 만족될 때까지 계산을 반복한다. 할선강성해석을 통해, 소성힌지의 비탄성변형에 의한 하중의 재분배가 고려될 수 있으며, 해당 소성힌지에서의 요구회전변형이 변형능력을 초과하지 않는지 비교함으로써 안전성을 평가할 수 있다. 검증을 위해, 제안된 방법은 기존의 연속보에 대한 실험연구와 비교되었으며, 기존건물의 평가에 적용되었다.