• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.313-314
• /
• 2013

The study carried out the experiment with presenting as the fundamental data for developing non-cement by using red mud generated in blast furnace slag and bauxite generated in the process of manufacturing the pig iron process of manufacturing Al(OH)₃/Al₂O from as the binding material using the accelerator of NaOH. After fixing the thing and the NaOH adding the blast furnace slag and NaOH 10, 20, 30 (%) with 10, 20, 30 (%) substituted the red mud in the blast furnace slag and the experimental method carried out the experiment. And it measured the flexural strength and compressive strength and took a photograph EDS analysis and SEM. Consequently, the compressive strength was improved as the addition rate of the NaOH was high and the compressive strength according to the replacement ratio of the red mud was degraded. This is determined that film of the blast furnace slag is destroyed and it makes the hydration reaction condition and the intensity is revealed.

• 한국물환경학회지
• /
• 제26권4호
• /
• pp.664-672
• /
• 2010

This study was performed to evaluate the feasibility of industrial by-products such as converter slag, olivine, red mud and fly ash as a seed crystal of struvite crystallization for the removal of highly concentrated $NH_4-N$ and $PO_4-P$. In the kinetic experiments, more than 90% of $NH_4-N$ and $PO_4-P$ was eliminated by struvite crystallization within 30 minutes of reaction time. The pH range in meta-stable region of struvite crystallization was found to be pH 7.0~9.0 under the Mg:N:P=1:1:1 equi-molar condition with 100 mg/L of $NH_4-N$. Total removal efficiencies of $NH_4-N$ and $PO_4-P$ by both struvite precipitation and crystallization were increased with the increase of pH. Removal efficiencies of $NH_4-N$ and $PO_4-P$ were significantly enhanced by struvite crystallization using industrial by-products as a seed crystal compared with those by struvite precipitation without seed crystal. Red mud, converter slag, olivine and fly ash enhanced the removal efficiencies of $NH_4-N$ by 40.9%, 37.7%, 28.4% and 16.4%, respectively. Removal efficiencies of $PO_4-P$ for converter slag, red mud, fly ash, olivine were increased by 3.7 times, 2.6 times, 72.4% and 68.0%, respectively. Converter slag and red mud showed higher feasibility as a seed crystal than others for the removal of highly concentrated $NH_4-N$ and $PO_4-P$. In particular, converter slag might have a high capacity of phosphorus removal.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권5호
• /
• pp.31-41
• /
• 2011

The objectives of this study were to investigate the efficiencies of the stabilizers such as mono-potassium phosphate (MKP), phosphate fertilizer and red mud in treating the mine tailings contaminated with heavy metals and to characterize the changes in fractionations of the heavy metals during the stabilization. The TCLP results showed that the stabilization efficiencies of Cd, Pb and Zn increased with the increase in the stabilizer dosage and the reaction times. MKP showed the highest efficiencies for the heavy metals stabilization among the stabilizers tested. When the mine tailings were amended with MKP, the TCLP concentrations of Cd, Pb and Zn were reduced by 79~97%, 61~84%, and 89~99%, respectively. When the composite stabilizers, MKP/phosphate fertilizer or MKP/red mud, were used, the stabilization efficiencies were lower than when MKP was used as a single stabilizer. The sequential extraction results showed that carbonates fraction of Cd and Zn increased generally. Especially, when red mud was used, carbonates fraction of Cd and Zn increased 5 and 18 times, respectively. In the case of Pb, the treatment with MKP increased residual fraction by 10 times. The results showed that MKP was the most effective in stabilizing the heavy metals (Cd, Pb and Zn) to improve the efficacy of the composite binders.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.244-245
• /
• 2014

This is an experimental study on manufacturing of non-cement matrix. Materials like cement and blowing agent in foamed concrete is replaced by by-products from blast furnace slag and paper ash. Further, the experiment was performed by replacing alkali with red mud by (0, 5, 10, 15, 25, 35, 45) of weight of alkali (wt.%) in order to reduce the amount of expensive alkali acclerator. Sample Plain with density showed lowest. The compressive strength test result, showed a similar trend with density. And it showed that compressive strength of the RM-0.05 was highest.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.598-602
• /
• 2003

The general red-mud minerals consist of hematite, sodalite, anatase, quartz, gibbsite and miner impurities. This gives serious environmental damage for the ocean disposal. It mixed with chloride compound and the content of chlorine is about 2,000-3,000ppm. This paper can be suggested the chloride reduction technology that is applied basically mineral processing by physical separation. Then it can be possible to produce the totally 24wt. $\%$ useful red-mud which chloride content is less then 400ppm.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.54-55
• /
• 2013

Recently, The economic growth has increased carbon dioxide emissions. so, It is caused by social problem to environmental damage and human health due to global warming. Accordingly, The method solution is to the amount of cement and to use industrial by-product such as Blast furnace slag, Fly Ash, and Red-mud. Thus, The purpose of this study is to analyze the physical property of concrete with red-mud. So, this study carries out the basic performance test of concrete such as, air content, slump, and compressive strength. In this work test is conducted according to sequence of materials using concrete twin mixer.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.31-32
• /
• 2023

In this paper, in order to utilize recycled aggregate as an alternative to natural resources in the construction industry, the physical properties of red mud-added soil concrete according to the type of aggregate and amount of binder were reviewed. The results of using waste asphalt concrete as a natural aggregate substitute were SPS-KSCICO- It was found to satisfy the compressive strength standards for parking lots of 001-2006, and its applicability in the construction industry was judged.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.81-82
• /
• 2023

As part of a study to utilize recycled aggregates in the construction industry, this paper attempted to examine recycled aggregates from waste concrete, a construction waste, and red mud, an industrial by-product, by applying them to earthen concrete packaging materials. As a result, it was found to satisfy the compressive strength standards for parking lots of SPS-KSCICO-001-2006, and its applicability in the construction industry was judged.

• 한국건축시공학회지
• /
• 제23권6호
• /
• pp.693-702
• /
• 2023

본 연구에서는 산업부산물 레드머드를 건설산업에서의 활용 가능성에 대한 기초 데이터를 분석하기 위해 pH 10~12인 액상 레드머드(LR)를 질산으로 중화하여 pH 7~8인 액상 레드머드를 시멘트 종류에 따른 모르타르에 대체하였다. 평가항목으로 플로우, 응결시간, 압축강도를 측정하였으며 XRD, SEM 분석을 통해 화학적 특성을 분석하였다. 플로우 측정결과 시멘트 종류별 LR과 LN의 경우 Plain과 비교하여 플로우 값이 감소하였다. 응결시간 측정결과 시멘트 종류별 Plain과 비교하여 LR과 LN의 초결시간과 종결시간은 단축되었다. 압축강도 측정결과 액상 레드머드를 슬래그 시멘트에 대체하였을 경우 초기강도가 증가하며 장기강도의 경우 시멘트 종류별 모르타르의 강도 개선이 미미하였다. SEM 분석결과 시멘트 종류에 따른 Plain과 LN에서 공극이 관찰되었고 LR의 미세구조는 섬유상 조직으로 미세구조가 다르게 나타났다. XRD 분석결과 OR과 ON 비교하여 SN에서는 XRD 패턴이 유사하게 나타나고 있지만, 2θ 값 22°에서 피크가 관찰되었다. SR에서는 새로운 피크가 관찰되었다. 따라서 질산 중화 액상 레드머드보다 중화하지 않은 액상 레드머드를 슬래그 시멘트 모르타르에 대체하였을 경우 초기강도가 우수한 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.21-22
• /
• 2019

This study is designed to apply natural clay replaceable redmud as ceramic material by mixing redmud with the materials used in existing brickmaking in laboratory environment. Therefore, through this study, the redmud is recycled as a raw material for clay bricks and presented as a basic material for the use of redmud in clay bricks.