• Journal of Microbiology
• /
• v.45 no.6
• /
• pp.485-491
• /
• 2007

The effects of biological pretreatment on the Japanese red pine Pinus densiflora, was evaluated after exposure to three white rot fungi Ceriporia lacerata, Stereum hirsutum, and Polyporus brumalis. Change in chemical composition, structural modification, and their susceptibility to enzymatic saccharification in the degraded wood were analyzed. Of the three white rot fungi tested, S. hirsutum selectively degraded the lignin of this sortwood rather than the holocellulose component. After eight weeks of pretreatment with S. hirsutum, total weight loss was 10.7%, while lignin loss was the highest at 14.52% among the tested samples. However, holocellulose loss was lower at 7.81 % compared to those of C. lacerata and P. brumalis. Extracelluar enzymes from S. hirsutum showed higher activity of ligninase and lower activity of cellulase than those from other white rot fungi. Thus, total weight loss and changes in chemical composition of the Japanese red pine was well correlated with the enzyme activities related with lignin- and cellulose degradation in these fungi. Based on the data obtained from analysis of physical characterization of degraded wood by X-ray Diffractometry (XRD) and pore size distribution, S. hirsutum was considered as an effective potential fungus for biological pretreatment. In particular, the increase of available pore size of over 120 nm in pretreated wood powder with S. hirsutum made enzymes accessible for further enzymatic saccharification. When Japanese red pine chips treated with S. hirsutum were enzymatically saccharified using commercial enzymes (Cellulclast 1.5 L and Novozyme 188), sugar yield was greatly increased (21.01 %) compared to non-pre treated control samples, indicating that white rot fungus S. hirsutum provides an effective process in increasing sugar yield from woody biomass.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.325-329
• /
• 2016

Extracting natural dyes have been widely studied since the needs of eco-friendly and non-toxic natural dyes increased. In this paper, the natural dyes were extracted from sappan wood, gardenia, and mugwort containing brazilein, crocin, and chlorophyll process. After the extraction with variables of pH of solvent and reaction time, the chromaticity of extracted natural dyes was analyzed using quantitative values from brightness and color coordinate (L, a, b) based on the target colors of red, yellow and green. For the case of brazilein and crocin, the cadmium red and cadmium yellow, respectively were extracted. In the case of sappan wood and gardenia, the red pigment under pH 12 (${\Delta}$ = 18.2) and the yellow pigment at pH 9 (${\Delta}$ = 18.4) were extracted respectively. However, the color of extracted chlorophyll from mugwort was different from the target chrome green.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.784-791
• /
• 2015

Polyethylene glycol (PEG) impregnation prevents a red pine disk from cross-sectional checking during drying. Percentage of PEG Retention (PPR) was measured by the experimental methods of aceton extraction and moisture conditioning in a saturated salt solution and the effect of acetylation on PEG impregnated wood was investigated. PPRs of the kiln-dried specimens were much higher than those of the air-dried by at least four times and within the kiln-dried specimens those of the sapwood were higher that those of the heartwood by two times. These results were confirmed by the moisture conditioning experiment. Acetylation increased the weights of the kiln-dried specimens much less than those of the air-dried. It was revealed that acetic anhydride solution eluted PEG-1000 in the specimens. It is concluded that kiln-drying is more effective than air-drying for the increase of PPR and that acetylation eliminates the difference between the kiln- and air-dried specimens.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.3
• /
• pp.265-276
• /
• 2019

In our previous study, the LeNet3 model successfully classified images from the transverse surfaces of five Korean softwood species (cedar, cypress, Korean pine, Korean red pine, and larch). However, a practical limitation exists in our system stemming from the nature of the training images obtained from the transverse plane of the wood species. In real-world applications, it is necessary to utilize images from the longitudinal surfaces of lumber. Thus, we improved our model by training it with images from the longitudinal and transverse surfaces of lumber. Because the longitudinal surface has complex but less distinguishable features than the transverse surface, the classification performance of the LeNet3 model decreases when we include images from the longitudinal surfaces of the five Korean softwood species. To remedy this situation, we adopt ensemble methods that can enhance the classification performance. Herein, we investigated the use of ensemble models from the LeNet and MiniVGGNet models to automatically classify the transverse and longitudinal surfaces of the five Korean softwoods. Experimentally, the best classification performance was achieved via an ensemble model comprising the LeNet2, LeNet3, and MiniVGGNet4 models trained using input images of $128{\times}128{\times}3pixels$ via the averaging method. The ensemble model showed an F1 score greater than 0.98. The classification performance for the longitudinal surfaces of Korean pine and Korean red pine was significantly improved by the ensemble model compared to individual convolutional neural network models such as LeNet3.

• Korean Architects
• /
• s.536
• /
• pp.70-75
• /
• 2013

• Journal of the Korean Wood Science and Technology
• /
• v.4 no.1
• /
• pp.48-53
• /
• 1976

This Study was carried out to investigate the course of air-drying and drying defects of red pine (Pinus densiflora S. et Z.) and Italian poplar (Populus eurameriana I-476) boards 1,2 and 3cm thick in the flat pile. The results are as follows. 1. Air-drying curves for red pine and Italian poplar boards were same as figure 1 and 2. These moisture contents were lower in July and August during seasoning periods. 2. Air drying time of red pine board required to dry 15 percent moisture content in one week for 1 cm board, five weeks for 2 cm board and six weeks for 3cm board respectively. In case of Italian poplar boards, in one week for 1 cm board, four weeks for 2 cm and five weeks for 3 cm board. The thickness of board influenced the time for air drying. 3. Drying defects such as checking, warping and staining happened badly in pine than in Italian poplar boards. Especially, checking was severe in thicker board and warping in thinner board.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.120-126
• /
• 2015

In this study, we used various dyes from natural pigments such as tumeric, goldthread, indigo, pagoda tree flower, sappanwood, and safflower to make the Hanji wallpaper with super eight colors of yellow, orange, green, turquoise, violet, red, blue, and magenta. As a result of measuring the lightfastness, magenta dyed with sappanwood showed the worst effect, but blue dyed with only indigo showed the best effect. In terms of the spot test by water, red wallpaper dyed with safflower showed the clear spot, but blue, turquoise, and green dyed with indigo resulted in a little spot. The orange, violet, and magenta dyed with goldthread and sappanwood showed antibacterial activity, and the turquoise, green, and blue also has a little antibacterial activity. However, yellow and red didn't show the some result as expected. In the experiment for efficiency of formaldehyde removal, all Hanji wallpapers dyed with natural pigments showed the significant removal effect of formaldehyde, especially turquoise and red were the highest.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.2
• /
• pp.30-36
• /
• 2006

Wood fuel must be dried before combustion to minimize the energy loss. Sawdust of Japanese red pine was dried in a batch type fluidized-bed to investigate the drying characteristics of sawdust as a raw material for bio-fuel. The minimum fluidization air velocity was increased as particle size was increased. It took about 21 minutes and 8 minutes to dry 0.08 m-deep bed of particles with average particle size of 1.3 mm from 100% to 10% moisture content at air temperature of $20^{\circ}C$ and $50^{\circ}C$, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.2
• /
• pp.3-7
• /
• 1990

The chemical Composition of Chinese red pine (Pinus massoniana) submerged in the Yellow Sea for more than 700 years has been examined. When compared to the recent wood, the marked chemical changes in the waterlogged wood is the higher amount of lignin with lesser amount of holocellulose and abnormally high ash content. In the heavily degraded samples, the degradation of cellulose is more severe than that of hemicellulose. However, hemicellulose is much more attacked than the cellulose at the initial stage of deterioration in the sea water. Chemical analysis suggests that the cellulolytic marine microorganisms, whether they are fungi or bacteria. can be regarded as the primary agents for the destruction of the archaeological woods submerged in the sea water.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.93-99
• /
• 1996

In order to investigate the extent of fixation of new water-borne preservatives in blocks of pinus densiflora sapwoods the streaming potential through the column with preservative treated wood was measured at various conditions. The rates of leachability of ingredients in the treated wood were estimated by the measurement of electric conductivity of the solution with the leached components. The solution was also analyzed by Atomic absorption spectrophotometer (AA). As a results, the experimental data indicated that the fixation of CCB, CCFZ and ACQ in wood were relatively unstable. The fixation rates of CCB, CCFZ were improved by increasing heat and drying time. The amounts of the leached ingredients were apparently higher in CCB and CCFZ than in CCA, while the rate of leaching of ACQ was not changed at various drying temperature.