• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.1
• /
• pp.32-41
• /
• 2008

This paper studies a joint EOQ and EPQ model in which a stationary demand can be satisfied by recycled products as well as newly purchased products. The model assumes that a fixed quantity of the used products are collected from customers and later recovered for reuse. The recovered products are regarded as perfectly new ones. We also assume that the number of orders for newly purchasing items and the number of recovery setups in a cycle can be mutually independent integers. Under these assumptions, we develop an optimization model obtaining the economic order quantity for newly procured products, the optimal lot size for the recovery process, and the sequence of the orders and the setups, simultaneously. And then a simple solution procedure to find a local optimal control parameter set is proposed. To validate the model and the solution procedure, finally, some computational experiments are presented.

• Fibers and Polymers
• /
• v.2 no.1
• /
• pp.157-162
• /
• 2001

Dyebath used for metal complex dyeing of nylon microfiber was recycled to reduce the overall amounts of metal complex dyeing effluents. Instead of discharging the dyebath after each dyeing cycle, the residual dyebath was analyzed spectrophotometrically and reconstituted to the required concentration of dyes and auxiliaries. Dyebaths were reused eight times and the CIELAB coordinates of dyed samples were measured after each recycling. Color difference($\Delta$E*) between the sample dyed in the fresh bath and that from reused dyebath was maintained below 1.5. The levelness and fastness of dyed fabrics from recycled dyebath were not impaired either. Chromium content of each recycled dyebath was similar to that of the first residual dyebath.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.1
• /
• pp.205-213
• /
• 2008

Servicizing is defined 'not as to sell the products but as to sell the functions'. This study was done on the methods for revitalization as the object items of navigation & antenna among car parts. The direct door-to-door survey was done for 101 enterprises (direct-management stores) and percentage & t-test were done for statistics. The results can be summarized like followings. First, PR on servicizing is required. Second the optimized methods can be obtained by incorporating reuse & recycling distribution systems of servicizing with the existing recovery system Reuse distribution system can be constructed rationally because inventory control is being done correct1y with the periodic recovery. Finally, as for the analysis on the relative importance of main factors of servicizing, it shows that supports & providing the concrete frame of the government & local autonomous body are important.

• Journal of the Korea Furniture Society
• /
• v.17 no.1
• /
• pp.47-54
• /
• 2006

This study focused on designing environment-friendly furnitures by recycling useless stuffs. I designed environment-friendly furnitures by using plastic manekings, which do not decay easily. Designing environment-friendly furnitures by using maneking, we should consider the following; to make our surrounding comfortable and pleasant, to make the appearance of the streets more beautiful, and to consider our future environment. We need to use reusable and recyclable wastes much more to make environment-friendly furnitures from now on.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.228-235
• /
• 2024

Battery use is increasing worldwide to achieve carbon neutrality and improve energy efficiency, but batteries are a finite resource and their application is determined by capacity and specifications. Battery performance deteriorates as the number of uses increases. A certain level of battery performance degradation has become an issue in the field of reuse and recycling, and various studies are being conducted on reuse to solve power shortages. Waste batteries from electric vehicles are suitable for building ESS based on reusable batteries, and for stable use, technical skills are needed to accurately predict battery life and determine status information. Predicting battery life and determining status information are difficult due to non-linearity due to internal structure or chemical changes. In this paper, we manufactured a modular internal resistance measuring device and compared the measured values with Hioki equipment to minimize the error rate through a correction method. As a result of testing Hioki equipment and modular measuring instruments to ensure efficiency and safety based on reusable batteries, an accuracy of over 95% was confirmed.

• Hwankyungkyoyuk
• /
• v.11 no.2
• /
• pp.130-143
• /
• 1998

This study was conducted as a preliminary step to establish a model for the practical application of environmental education related to food wastes collected from elementary school foodservices. Methods of treatment and present recycling status of food wastes in elementary schools in Kyonggido were surveyed. The consciousness of dieticians who have been serving for elementary school foodservices was also analyzed through the survey questions concerning environmental education for the reduction and recycling of food wastes. The results derived from this survey were as follows: The major portion of food wastes from elementary school foodservices was constituted with vegetables and soup, and an average amount of food wastes per day was highest in June and July. Therefore environmental education related to reduction of wastes was needed in the first semester of school terms, and the possible reduction of food wastes achieved through the proper planning of school foodservice menu was also needed. In most cases food wastes were collected and treated by animal growing farmers or composted by machines in school. In operating composting machines microorganism inoculant was mostly used but dieticians pointed out the problem of a nasty odor, insects, and high energy consumption. This situation means it has not been operated efficiently and suggests an efficiency problem of machine composting in elementary schools because composting itself is based on the aerobic digestion and high temperature fermentation which kills insects and harmful microorganisms. Elementary school dieticians in Kyonggido were aware that food wastes cause main pollution problem, and that food wastes are valuable resources which can be recycled, and recycling of food wastes is inevitable. But more than half of the schools surveyed have not been reused food wastes in school, so a proper model for recycling and reuse of food wastes in school grounds was thought to be needed. Environmental education programs related to food wastes have not been peformed in more than half of the schools surveyed. It was concluded that the following three plans will be helpful to reduce school food wastes. First, environmental education should be enforced, second, teachers' and dieticians' intensive teaching concerning food wastes should be needed, and finally establishment of a model for recycling and reuse of food wastes in school grounds and its application to environmental education would offer a valuable field experience to school students.

• Clean Technology
• /
• v.19 no.4
• /
• pp.388-392
• /
• 2013

Iindium-tin-oxide (ITO) material was had to use in display application as transparent electrode. However it would be problems comes up, the depletion of indium, tin and energy consumption of production process. Therefore recently trend was demanded alternative ITO material and recycling/reused ITO. In this conditions, the environmental impact have to express correct value about recycling/reused ITO process. The life cycle assessment was valuable method in this process. Thus first step was carried out separating in/out put (material) sources and then, exactive data base (DB) was applied. The result of environment impact was calculated by affect categories and recycling rate was set to 34% (This value was measured in previous project). The rate (g) of ITO material was calculated by chemical equivalent. In result, environmental impact were revealed acidification potential and abiotic depletion and if do not recycle/reuse ITO, $ 476 per 1 ton waste in land.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.91-101
• /
• 2007

In this study, domestic regulatory requirement was investigated for self-disposal of concrete waste from nuclear fuel processing facility. And after self-disposal as landfill or recycling/reuse, the exposure dose was evaluated by RESRAD Ver. 6.3 and RESRAD BUILD Ver.3.3 computing code for radiological assessments of the general public. Derived clearance level by the result of assessments for the exposure dose of the general public is 0.1071Bq/g (3.5% enriched uranium) for landfill and $0.05515Bq/cm^2$ (5% enriched uranium) for recycling/reuse respectively. Also, residual radioactivity of concrete waste after decontamination was investigated in this study. The result of surface activity is $0.01Bq/cm^2\;for\;{\alpha}-emitter$ and the result of radionuclide analysis for taken concrete samples from surface of concrete waste is 0.0297Bq/g for concentration of $^{238}U$, below 2w/o for enrichment of $^{235}U$ and 0.0089Bq/g for artificial contamination of $^{238}U$ respectively. Therefore, radiological hazard of concrete waste by self-disposal as landfill and recycling/reuse is below clearance level to comply with clearance criterion provided for Notice No.2001-30 of the MOST and Korea Atomic Energy Act.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.113-125
• /
• 1984

Water supply has been mainly dependent on the construction of the dams in Korea. It is difficult, however, to continue to construct dams for many reasons, such as the decrease of construction sites, the increase of construction costs, the compensation of residents in flooded areas, and the environmental effects. Water demands have increased and are expected to continue increasing due to the concentration of people in the cities, the rise of the living standard, and rapid industrial growth. It is acutely important to find countermeasures such as development of ground water, desalination, and recycling of waste water to cope with increasing water demands. Recycling waste water includes all means of supplying non-potable water for their respective usages with proper water quality which is not the same quality as potable water. The usages of the recycled water include toilet flushing, air conditioning, car washing, yard watering, road cleaning, park sprinkling, and fire fighting, etc. Raw water for recycling is obtained from drainage water from buildings, toilets, and cooling towers, treated waste water, polluted rivers, ground water, reinfall, etc. The water quantity must be considered as well as its quality in selecting raw water for the recycling. The types of recycling may be classified roughly into closed recycle systems and open recycle systems, which can be further subdivided into individual recycle systems, regional recycle systems and large scale recycle system. The treatment methods of wastewater combine biochemical and physiochemical methods. The former includes activated sludge treatment, bio-disc treatment, and contact aeration treatment, and the latter contains sedimentation, sand filtration, activated carbon adsorption, ozone treatment, chlorination, and membrane filter. The recycling patterns in other countries were investigated and the effects of the recycling were divided into direct and indirect effects. The problems of water reuse in recycle patterns were also studied. The problems include technological, sanitary, and operational problems as well as cost and legislative ones. The duties of installation and administrative organization, structural standards for reuse of water, maintenance and financial disposal were also studied.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.1
• /
• pp.79-92
• /
• 2004

The purpose of this study is to examine the actual condition of environment conscious logistic system which is essential to make material recycling economic society. Environment conscious logistic management which meant simply recycle is tend to promote material reduction, reuse and recycling. We have made case studies about advanced environment friendly logistic system. To examine Korean companies' environment conscious logistic system, we made survey form which is consist of 82 questionnaires and 154 companies have participated for this. And we have analyzed the survey responses. As a result of this study, we propose the way of constructing environment conscious logistic system in Korea.