• 제목/요약/키워드: recycling of tire waste

검색결과 59건 처리시간 0.024초

폐타이어 재 자원화를 위한 연구 (A Study on Recycling of Waste Tire)

  • 이석일
    • 한국환경보건학회지
    • /
    • 제26권4호
    • /
    • pp.38-44
    • /
    • 2000
  • Compared to other waste, waste tire has much discharge quantity and calorie. When we use waste heat from waste tire, it can be definitely better substitute energy than coal and anthracite in high oil price age. To use as a basic data for providing low cost and highly effective heating system, following conclusion was founded. Annual waste tire production was 19,596 million in 1999, Recycling ratio was almost 55% and more than 8.78 million was stored. Waste tire has lower than 1.5% sulfur contain ratio which is resource of an pollution, So it is a waste fuel which can be combustion based on current exhaust standard value without any extra SOx exclusion materials. Waste tire has 9,256Kcal/kg calorific value and it is higher than waste rubber, waste rubber, waste energy as same as B-C oil. When primary and second air quantity was 1.6, 8.0 Nm$^3$/min, dry gas production time was 270min and total combustion time was 360 min. In the SOx, NOx, HC of air pollution material density were lower than exhaust standard value at the back of cyclone and dusty than exhaust standard value without dust collector.

  • PDF

폐타이어 분말을 이용한 혼합경량토의 압축특성 연구 (Compression Characteristics of Waste Tire Powder-Added Lightweight Soil)

  • 강효섭;김윤태
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.774-781
    • /
    • 2009
  • The purpose of this study was to research on compressibility characteristics of waste tire powder-added lightweight soil(TLS) for recycling dredged soil, bottom ash and waste tire. The TLS used in this experiment consists of dredged soil, cement, waste tire powder and bottom ash. Test specimens were prepared with various content of waste tire powder ranged from 0% to 100% at 25% intervals by the dried weight of dredged soil. Several series of one-dimensional consolidation tests were carried out. Based on the experimental results, as the waste tire powder increased, the swelling index of TLS increased. The compression index and swelling index of the TLS with bottom ash content showed lower value than without bottom ash. Then, compressibility characteristics of TLS were strongly influenced by mixing conditions of waste tire powder content and bottom ash content.

  • PDF

폐타이어/폐유의 복합 열분해에 의한 오일화 공정개발 연구 (Oil Recovery through Wasts Tire/Wasts Oil Pyrolysis)

  • 김동찬;신대현;정수현
    • 자원리싸이클링
    • /
    • 제4권4호
    • /
    • pp.12-15
    • /
    • 1995
  • In this paper, some representative waste tire pyrolysis were investigated together with the analysis of the problems associated with the commercialization of various waste tire treatment technologies. Also, R & D results on recovering the oil from the pyrolysis of waste tires, when waste oil was used as a heating medium, were summarized in this study. Experimental results show that the present pyrolysis process has both lower pyrolytic temperature and higher pyrolysis rate than usual one and that the quality of the product oil and residue obtained was relatively even with large availability.

  • PDF

폐타이어 분말과 재생PP로 제조한 열가소성 고무 플라스틱(TPV)의 물성평가 (Characterization of Thermo-Plastic Vulcanized (TPV) Composite Prepared by the Waste Tire and Plastic Powder)

  • 안주영;박종문;방대석;김봉석;오명훈
    • 자원리싸이클링
    • /
    • 제23권4호
    • /
    • pp.30-36
    • /
    • 2014
  • 자동차 산업의 발달과 함께 환경오염 문제가 심각해지면서 연간 300,000톤 이상 발생하는 폐타이어의 재활용에 대한 관심이 높아지고 있다. 본 연구에서는 폐타이어 재활용을 목적으로 40, 80, 140 mesh 크기의 폐타이어 분말을 선별한 후, 입도 분석을 통하여 크기를 확인하고 그 형상을 SEM을 통해 관찰하였다. 또한 각각의 폐타이어 분말을 Virgin PP와 혼합하고 Intermeshing Corotating Twin Screw Extruder를 이용하여 TPV를 제조하고 특성 분석을 하였다. 이 중 효과가 좋은 140 mesh의 폐타이어 분말과 Virgin PP, Waste PP, PP-g-MA 세 가지 종류의 매트릭스를 다양한 비율로 혼합하여 TPV를 제조한 후 UTM을 통한 인장강도, 연신율과 Izod impact로 충격강도 등을 측정하였고 TGA로 열안정성을 확인하였다. 또한 SEM을 통하여 폐타이어 분말의 분산정도 및 파단면을 확인하였다.

Development of Powder Utilization of Waste Rubber

  • Kim, Jin-Kuk;Lee, Sung-Hyo;Hwang, Sung-Hyuk
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.220-224
    • /
    • 2001
  • Waste tires are a significant problem with the increasing in number of automobiles. Therefore, many researches have been studied on this field. Recycling is the one of the popular method aspect to environmental and economical in the treatment methods of the waste tire, which loads that the reuse of scrap tire rubber has been a challenge in the past. However, it is not easy method to melt down and mold into new products because the in rubber is a cross-linked polymer. Most difficulty in recycling is the recycled product is not economic. Therefore, the goal of this study is to develop the high valuable products for reused waste tires. In this paper, we try to make an economic recycled technology using scrapped waste tires. This technology may applied for manufacturing the end products such as a rubber block and a ballast mat for high-speed train.

  • PDF

표면개질에 의한 폐타이어 분말의 재활용에 관한 연구(I) (A Study on Surface Modification of Waste Rubber Tire(I))

  • 김진국;황성혁;이성효;정재흠
    • 자원리싸이클링
    • /
    • 제12권2호
    • /
    • pp.28-35
    • /
    • 2003
  • 폐타이어의 처리방법으로서는 recycling이 가장 최선의 방법 중의 하나이다. 하지만 재활용의 어려움 중에는 경제성의 문제가 있다. 이러한 문제점을 해결하기 위해서는 폐타이어의 입자 크기를 줄이는 방법과 표면처리를 통하여 제품의 물성을 향상시키는 방법이 있다. 본 연구에서는 두 방법을 동시에 응용한 방법으로 폐타이어의 입자크기를 작게 하고 ultrasonic 처리를 하였다. 그 결과로 폐타이어 가황 시스템의 변화를 가져옴으로서 물성의 향상을 알 수 있었다. 이러한 기술은 재활용의 경제성을 높이는 기초기술임을 알 수 있었다.

분쇄 방식에 따른 폐타이어 고무분말의 특성 연구 (Characteristics Studies of Waste Tire Rubber Powders using the Different Grinding Methods)

  • 박종문;안주영;방대석;김봉석;오명훈
    • 자원리싸이클링
    • /
    • 제23권3호
    • /
    • pp.44-50
    • /
    • 2014
  • 본 연구에서는 기존의 cutting 분쇄방식 대신 여러 가지 문제점을 개선한 shear방식 및 2단 disk mill 방식으로 폐타이어를 미분화시켰다. 각 파쇄 또는 분쇄 단계별로 다양한 크기의 고무 칩을 얻을 수 있었다. Shear방식 및 2단 disk mill 방식은 회전 속도와 방향이 다른 두 개의 드럼형의 칼날로 이루어져 있어서 기존의 cutting 방식보다 거친 표면의 미분화 폐타이어 분말을 얻을 수 있었다. 본 연구에서는 주로 shear방식으로 미분화된 폐타이어 분말의 형상을 SEM을 통해 비교하였다. 추가적으로 적절한 크기의 폐타이어 분말이 얻어졌는지를 확인하기 위해 입도분석을 수행하였다.

폐타이어 재활용에 있어서 가공조건의 영향 (Effect of the Curing Conditions on the Recycling of the Scrap Waste Tire)

  • 조하나;김진국
    • Elastomers and Composites
    • /
    • 제31권2호
    • /
    • pp.95-103
    • /
    • 1996
  • Nowadays, recycling of waste materials is one of great attention among all industries. Especially, the waste tires become a significant problem with increasing in a number of automobiles. For recycling of the waste tires, a polyurethane binder was mixed with the scrapped rubber powders obtained from tread part of the waste tire. This study covered the effect of processing conditions;curing temperature and curing time;on the mechanical properties of the blend. We also compared the experimental results from labors-tory scale with those from scale-up.

  • PDF

폐타이어-저회가 혼합된 유동성 복합지반재료의 공학적 특성 (Engineering Properties of Flowable Composite Soil with Waste Tire and Bottom Ash)

  • 김윤태;강효섭
    • 한국해양공학회지
    • /
    • 제24권3호
    • /
    • pp.52-58
    • /
    • 2010
  • This study investigated the engineering properties of waste tire powder-bottom ash added composite soil, which was developed to recycle dredged soil, bottom ash, and waste tire powder. Test specimens were prepared using 5 different percentages of waste tire powder content(0%, 25%, 50%, 75%, and 100% by weight of the dry dredged soil), three different percentages of bottom ash content (0%, 50%, and 100% by weight of the dry dredged soil), and three different particle sizes of waste tire powder (0.1~2 mm, 0.9~5 mm, and 2~10 mm). Several series of unconfined compression tests, direct shear tests, and flow tests were conducted. The experimental results indicated that the waste tire powder content, particle size of waste tire powder, and bottom ash content influenced the strength and stress-strain behavior of the composite soil. The flow value increased with an increase in water content, but decreased with an increase in waste tire powder content.

A Statistical Analysis of Recycling Cost for Waste Home Appliances

  • Esher Hsu;Kuo, Chen-Ming
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.59-64
    • /
    • 2001
  • On July 5, 1997, environmental Protection Administration of Taiwan publicized the recycling regulation of waste home appliances that include four items, namely, television, refrigerator, washing machine, and air conditioner. It is believed that this regulation pioneers the law enforcement of waste home appliances in the world. To comply with tile policy, several contemporary waste disposal plants specialized in waste home appliances were established according to a follow-up technical specification oil the waste treatment facilities and methodology. Therefore, the traditional dismantling facilities were substituted and waste collection routes were altered as well accordingly. This study investigates the collection and recycling costs of waste home appliances in accordance with these newly established routes and facilities, respectively. Cost survey was conducted among collectors and recycling plants of waste home appliances; consequently, tire collection and recycling costs were analyzed, correspondingly. Results show that the recycling costs of waste home appliances were much higher than that of other waste items. Since the market share of recycled materials is lacking, these waste recycling plants of home appliances can only survive under the subsidy of EPA in Taiwan. Due to some arduous problems, the subsidiary system has already caused serious financial unbalance for a foundation under EPA of Taiwan, which associated with waste recycling in Taiwan.

  • PDF