• Resources Recycling
• /
• v.4 no.1
• /
• pp.31-37
• /
• 1995

This study was to investigate the effects oi agitation speed, pulp concentration, ion concentration ill the slurry solution, printed area of the waste newspaper, immerwng time and the temperature on the defiberation process for the waste newspaper. The defikration efficiency at 50% is twice that of 16%. The efficiency is improved as two times according to elevate the agtation speed as two times in the range of 200-2WO r.p.m.. Defiberation with NaOH 1X10-'M solution has higher efficiency than that of NaOH 1 x 1 0 - M solution as 3 times at the conditions of 16%, 1200 r.p.m, and 1% pulp concentration The temperature of immersing salut~on aifects on the efficiency more than immersing time does. Increasing the printed area of newspaper decreases the velocity of defiberation. The alkaline solution is effective to defiberate and the defiberation efficiency at the same dosage of alkalinity is in the order a1 NaOH) KOH) Na,SiO, ) Na,CO, ) Ca(OH)2.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.4
• /
• pp.96-102
• /
• 2002

The purpose of this study was estimate the optimal phosphorus and calcium levels of Korean native cow manure on the growth and cast production of earthworm(Eisenia foetida). Phosphorus and calcium levels supplemented to cow manure were 0%(without earthworm), 2% and 4%, and 0.01%, 0.02%, 0.04% and 0.06% of the cow manure by weight, respectively. The maximum fresh weight and increasing rate of earthworm were obtained with 2% phosphorus level, but there was not significant differences between calcium levels. The ratios of available phosphorus to calcium contents of cast were 1.04-1.20:1 with 2%, and 1.28-1.37:1 with 4% phosphorus levels. Conversion rate of organic matter to earthworm tissue were 0.35-0.41% with 2%, and 0.25-0.40% with 4% phosphorus levels.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.4
• /
• pp.103-111
• /
• 2002

The purpose of this study is to investigate influence of NaCl precisely in recycling process of food waste and in places where food waste compost is used, because NaCl with food waste has caused concerns of adverse effects in the process of food waste recycling and in plates where final products is used. The influence of NaCl in composting was measured through temperature, concentration of carbon dioxide ($CO_2$) and pH. NaCl didn't cause bad effects until 1%(wet base) of NaCl concentration for composting, showed adverse effects gradually at 2% and 3% and affected composting deeply at 6%. The influence of NaCl in composting was insignificant until 3% of NaCl concentration but decomposing efficiency of organic compounds was interfered with more than 3%. NaCl concentration has to be maintained less than 1%(wet base) to minimize adverse effects of NaCl in composting however NaCl concentration with food waste used in real composting facilities is so lower than 1 %(wet base) that the bad influence in food waste composting is slight. Compost(final product) was collected from real food waste recycling facilities in A city, S city, K-Gu and S-Gu and controlled NaCl concentration artificially such as 0.5%, 0.8%, 1.2%, 1.6%, 2.0%, 2.5% and 3.0% to investigate influence of NaCl on growth of plants. In results of plant test and pot experiment, according to quality of compost sampled, the influence of NaCl is insufficient until 3% and bad effects appeared clearly more than 3%. The bad effects showed less than 3% because compost sampled was not stabilized fully.

• Resources Recycling
• /
• v.7 no.1
• /
• pp.27-33
• /
• 1998

A study on thc recovcry oi nickel from waste pickling solutions removed li-ee nil~ica cid and hydmflnoric acid is carried out with pulsed column extractor for thc industrial application. The ~esults show that thc Iron and chromium arc efteclively elunmatcd from the waste solution by precipitalion as the form of hydraxidc with thc adjustment of pH with CaCO;, whlle the nickel is not prcc~pitatcd. Thc cxlraction eficicncy ol nickel with column cxtraclor generally improves 8s the pulse velosity (product of amplmde and frequency) incrcascs, optimum pcrfarmancc typically occuring slightly below an amplihldefrecluency product which results in flooding the column because of excessive emulsiIicalian And the nickel loaded in the organic is erfeclively conce~~trtratebdy ZM H2S0,, ~ I It he stlipping stage. The solubility of NiSO, in the H,SO, solution dccreaaes w~th thc higher H,SO, concentralion and appears to be 55 grL in the 2M HSO* solulian.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.2
• /
• pp.127-134
• /
• 2017

Bottom ash (BA) has different macro- and micronutrients such as B, Mo, Fe, Ca, and Mg, providing useful resources for plant growth and soil quality. The objective of this study was to evaluate the applicability of artificial top-soil treated with BA in park area as a vegetation base material, especially for turfgrass growth. Collected BA was mixed with peat moss and clay at the ratio of 70:10:20 (w/w). In order to evaluate the park quality and turfgrass growth in park area, the artificial soil was applied with BA along with the control or without BA. Result showed that exchangeable K and P were increased by $11.4mg\;kg^{-1}$ and $163mg\;kg^{-1}$, respectively, compared to the control soil when the artificial soil was treated with BA. Microbial population and enzyme activity (Acid-phosphatase, APA) in artificial soil having BA also increased as 2 times and 10%, respectively, compared to the control soil. Comparing turfgrass growth and yield between general soil and artificial soil, about 2 times higher plant yield (fresh weight) was observed as artificial soil was applied comparing to general soil. Furthermore, nutrient concentration in turfgrass was averaged as 0.440% for $P_2O_5$, 0.456% for CaO, 1.198% for $K_2O$ and 0.188% for MgO that all values are higher than general soil (0.323% for $P_2O_5$, 0.416% for CaO, 0.610% for $K_2O$ and 0.173% for MgO). Application of BA can be useful for vegetation base material in park site.

• Resources Recycling
• /
• v.2 no.2
• /
• pp.1-8
• /
• 1993

This study was carried out in order to define the effective collectors and the opitimum conditions for the removal of iron ion in waste water by flotation method. The results obtained in this study are summarized as follows. Fe(II) and Fe(III) were removed effectively at pH7 and 6 respectively by using sodium lauryl sulfate, an anionic collector. The anionic collector, aeropromotor 845, removed both Fe(II) and Fe(III) effectively in pH ranges of from 5 to 9. The cationic collector, trimetyl dodecyl ammonium chloride, removed both Fe(II) and Fe(III) effectively in pH ranges from 10 to 11 and from 4 to 10, respectively. Therefore, Fe(II) and Fe(III) could be effectively removed by forming the iron hydroxide precipitates by simple pH adjustment of the solutions above precipitation point of ferrous and ferric ion by flotation method. Then, the effective pH regulator and collector were NaOH and $Na_2CO_3$,aeropromotor 845 and trimetyl dodecyl ammonium chloride, respectively.

• Resources Recycling
• /
• v.7 no.4
• /
• pp.22-26
• /
• 1998

The purpose of this experimenL is to investigate the magnetic anisotropy and microwave absorbing properties in M-type Bat territe (${BaFe}_{12-2X}{A}_{X}{Me}_{X}{O}_{19}$), where $Fe_{3+}$ is substituted by $Ti_{4+}$ in A site and $Co_{2+}$ in Me site. The saturation magnetization (Ms) is linearly decreased with the substitution rate(x) and the coerciviLy (He) is rapidly decreased in accordance with the reduction in t the magnetocrystalline anisotropy For the specimen with x=0.8 and thickness of 2 mm, the reflection loss calculated from the n material constants is less than -10 dB (90% absorption) in the frequency range of 10~16 GHz. The absorption loss is pre이.ctcd t to be more than 20 dElern in the frequency range of 12-16 GHz. The results demonstrate that the Ti-Co substituted M-type Ba-ferrite can be effectively used as a microwave absorber at high frequency range.

• Resources Recycling
• /
• v.9 no.5
• /
• pp.16-21
• /
• 2000

Generation of abnormally large grains in the microstructure of small grains has been investigated on some ferrites. Some fractions of large grains were observed in the microstructue of sintered ZnFe$_2$O$_4$, Mn-ZnFe$_2$O$_4$, Fe$_3$O$_4$(in $N_2$) and MnFe$_2$O$_4$(in air). On the other hand, the large grains were not observed in $NiFe_2$$O_4$ and $CoFe_2$$O_4$, independent of calcining and sintering conditions. The large grains seem to be generated in such ferrites that are easy to very their compositions or valencies at high temperatures. as the sintering proceeded, the number of large grains was increasing to from a continuous structure consisting of large grains, while the size of large grains did not increase remarkably. In addition, the growth of small grains was also very slow during the generation of the large grains. The large grains appeared be suddenly generated after some induction periods. Avrami equation could be applied to the relation between net volume of large grains and sintering time. Thus, the grain boundaries may be strongly stabilized when the large grains are generated. The large grain is generated y the local activation of the stabilized rain boundaries, which is caused by the variation of composition or valencies during sintering. It is concluded that the essence of the abnormal gain growth is not the generation of abnormally large grains, but the abnormal stabilization and the local activation of he grain boundaries.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.2
• /
• pp.71-76
• /
• 2000

The biological carbon dioxide fixation using microalgae has been known as an effective carbon dioxide reduction technology. With many environmental factors influencing microalgal productivity, the desirable cultivation factors were investigated using a green alga, Euglena gracilis. It has the high protein and vitamin E to be used as fodder. In batch culture with a photobioreactor, initial pH, temperature, carbon dioxide concentration and light intensity in the optimum cultivation condition were 3.5, $27^{\circ}C$,5-10% and $520{\mu}mol/m^2/s$, respectively. After that, the optimum hydraulic retention time (HRT for the continuous cultivation was 4 days at carbon dioxide concentration of 10%. In this condition, the final dry cell weight was 1.2g/l.

• Resources Recycling
• /
• v.17 no.1
• /
• pp.51-58
• /
• 2008

Artificial mattes were prepared with adding pyrite or chalcopyrite as sulfur sources with Cu-Ni-Co-Fe alloy. The major phases identified by X-ray diffraction pattern were $(FeSi)_9S_8$, $CuFeS_2$, FeS, $Co_4S_3$, $Ni_3S_2$ and $Cu_2S$ for both mattes, and the matte prepared by adding chalcopyrite showed the higher peak of $Cu_2S$ due to high content of copper. Under optimum conditions, more than 95% copper, 90% nickel and 90% cobalt were extracted into leaching solution and sulfur concentration in the mattes did not much affect the leaching efficiency of the metals. The increase of the amount of pyrite or chalcopyrite added decreased pH in leaching solution and increased the concentration of iron ion dissolved in the leaching solution and the amount of residue.