• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.2
• /
• pp.161-166
• /
• 2020

In accordance with the amendment of the Industrial Safety and Health Act of 2007, Korea completely prohibited the import, distribution and manufacture of asbestos like Europe and Japan. Accordingly, the current problem of asbestos is the safe maintenance and disposal of asbestos construction material, the disposal of asbestos, and the final disposal of asbestos building materials. If the asbestos building material is made harmless, it may be classified as general waste or as recyclable waste. Therefore, this study evaluated the physical and chemical characterization of detoxified asbestos powder and the applicability of secondary products. In this study, it was found that applying the appropriate temperature and pressure for catalysis during asbestos desalination through low temperature chemical treatment was the most important factor.

• Journal of Energy Engineering
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2017

This study was carried out to physicochemical properties and free CaO contents of coal ash in domestic circulating fludized bed combustion power plant using ethylene glycol method. Results of physicochemical properties, there are many differences in CaO contents for the region position in CFBC plant. The reason, It is considered to be reflected that regulation of exhaust concentration for oxides of sulfur and other operation characteristics of region position in CFBC plant. Free CaO contents are 1.96 ~ 10.78% of fly ash and 0.07~4.24 % of bottom ash, fly ash is higher than in the bottom ash. besides CaO contents of raw materials, particle distribution have a lot of influence Free CaO contents.

• Smart Structures and Systems
• /
• v.24 no.4
• /
• pp.541-552
• /
• 2019

Construction development and greenhouse gas emissions have globally required a strategic management to take some steps to stain and maintain the environment. Nowadays, recycled aggregates, in particular ceramic waste, have been widely used in concrete structures due to the economic and environmentally friendly solution, requiring the knowledge of recycled concrete. Also, one of the materials used as a substitute for concrete cement is wollastonite mineral to decrease carbon dioxide (CO2) from the cement production process by reducing the concrete consumption in concrete. The purpose of this study is to investigate the effect of wollastonite on the mechanical properties and durability of conventional composite concrete, containing recycled aggregates such as compressive strength, tensile strength (Brazilian test), and durability to acidic environment. On the other hand, in order to determine the strength and durability of the concrete, 5 mixing designs including different wollastonite values and recovered aggregates including constant values have been compared to the water - cement ratio (w/c) constant in all designs. The experimental results have shown that design 5 (containing 40% wollastonite) shows only 6.1% decrease in compressive strength and 4.9% decrease in tensile strength compared to the control plane. Consequently, the use of wollastonite powder to the manufacturing of conventional structural concrete containing recycled ceramic aggregates, in addition to improving some of the properties of concrete are environmentally friendly solutions, providing natural recycling of materials.

• Journal of Convergence for Information Technology
• /
• v.11 no.10
• /
• pp.171-181
• /
• 2021

This study tried to derive improvement measures by identifying the perceptions of industrial college instructors and learners in the technology convergence sector, where various technologies are combined, as distance education at colleges are prolonged due to COVID-19 and difficulties for instructors and learners continue. To this end, an online survey was conducted on automobile professors and students at the end of the second semester of 2020. As a result of the survey analysis, it was found that professors and students had similar perceptions about the advantages of online classes, such as freedom of time and space, repeatable learning, and recycling. In terms of difficulties, it was found that students felt a decrease in learning immersion due to a lack of sense of presence, and both professors and students felt the difficulty of interaction relatively large. This study is meaningful in that it prepares suggestions and basic data on college policy support for online education at industrial colleges during and after COVID-19.

• Journal of Adhesion and Interface
• /
• v.22 no.3
• /
• pp.106-110
• /
• 2021

Recently, research using waste among eco-friendly materials has been attracting attention. In this study, we investigated the physical properties of blends in which high density polyethylene (HDPE) was filled with waste gypsum (CaSO₄) generated during fertilizer manufacturing. Composites were prepared by adding the gypsum content 0~20 wt% using a twin screw extruder. The mechanical, rheological, and thermal properties of the composites were evaluated. It was found that the tensile strength of the composites was less than 4.1% compared to that of unfilled HDPE, so there is no significant deterioration in physical properties. The thermal stability of the composites was improved as the gypsum content increased and the gypsum content had little effect on the viscosities of the composites.

• Journal of Climate Change Research
• /
• v.2 no.3
• /
• pp.143-159
• /
• 2011

Projects applying the CDM methodology AM0035 of the $SF_6$ Emission Reductions in Electrical Grids should provide direct monitoring of all the key parameters that are related to estimation of baseline and project emissions including detailed explanations of key operating conditions and procedures, and an explanation addressing uncertainty as the result of EB meeting 41. Through this study, recovery ratio during maintenance, purity of $SF_6$ before and after disposal, replacing, loss rate of $SF_6$ before and after reclamation, leakage emission from electricity consumption and fossil fuel combustion, considered conservatively the key parameter of various monitoring. Consequently, confirmed the reduction in the amount of reduction due to the baseline emission decrease, project emission increase.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.4
• /
• pp.289-296
• /
• 2020

BACKGROUND: There is a need for a revolutionary method to overcome the problem of biochar, which has relatively low adsorption capacity for existing anion pollutants, along with collectively recycling fallen leaves, a kind of forest by-product. Therefore, the objective of this study was to prepare iron-decorated biochar derived from fallen leaves (Fe-FLB), and to evaluate their adsorption properties to Congo red (CR) as anionic dye. METHODS AND RESULTS: The adsorption properties of CR by fallen leaves biochar (FLB) and Fe-FLB were performed under various conditions such as initial CR concentration, reaction time, pH and dosage with isotherm and kinetic models. In this study, Fe-FLB prepared through iron impregnation and pyrolysis of fallen leaves contained 56.9% carbon and 6.3% iron. Congo red adsorption by FLB and Fe-FLB was well described by Langmuir model and pseudo second order model and the maximum adsorption capacities of FLB and Fe-FLB were 1.1 mg/g and 25.6 mg/g, respectively. In particular, it was found that the adsorption of CR was occurred by chemical adsorption process by the outer boundary layer of Fe-FLB. CONCLUSION: Overall, the production of Fe-FLB using fallen leaves and using it as an anion adsorbent is considered to be a way to overcome the problem of biochar with relatively low anion adsorption in addition to the reduction effect of waste.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.6
• /
• pp.708-718
• /
• 2010

This study was conducted to examine the effects of a healthy dietary life and purchase of environmental-friendly food materials according to a mother's lifestyles of health and sustainability (LOHAS) attitudes. The subjects consisted of 295 mothers. The findings are summarized as follows. The mother's LOHAS attitude index averaged 3.39 points out of 5 points. High LOHAS attitude items were "I participate actively in separating the trash collection" (4.16 points), and "I recycle dresses that I do not wear by taking them to the recycling center" (4.08 points). In contrast, LOHAS attitude items for "I do community service activity on the weekend" (2.57 points), and "I try to serve in the local community" (2.63 points) scored very low. A high LOHAS behavior index occurred for mothers who were "resource saving", whereas "social welfare" scored low. Mother's intention to purchase environmental-friendly food materials averaged 3.61 points. Mother's health dietary life attitude score averaged 3.52 points. When age, monthly income, and the environmental-friendly food materials purchase ratio of the mother was high, the health dietary life performance was high. The LOHAS attitude index of mothers had an impact on the purchase intention of environmental-friendly food materials in resource saving and environmental-friendly oriented propensity groups. The LOHAS attitude index of mothers impacted healthy dietary life in environmental-friendly, family and health oriented propensity groups.

• Journal of Fashion Business
• /
• v.28 no.2
• /
• pp.125-138
• /
• 2024

The purpose of this study is to develop and implement a step-by-step upcycling fashion education program that can be utilized within the local community. This program aims to provide basic data by analyzing the current state of community-based upcycling projects and upcycling center programs. To achieve this, the study first examined the meaning and value of upcycling in fashion through literature research and explored upcycling projects and programs in connection with local communities. Subsequently, an upcycling fashion education program platform was developed and applied using the design thinking process. The program involved students from nine high schools in Gwangju Metropolitan City. Depending on the school's circumstances, the time and difficulty level of the upcycling education program were adjusted accordingly. A unique eco-bag making kit, using jeans developed in this study, was employed. Following the completion of the program, a satisfaction survey was conducted among 167 participating students from the high school community class. The findings indicated that the majority of students experienced an increased appreciation, attraction, and interest in upcycling products. They also demonstrated an understanding of the environmental impact of upcycling products and the distinction between upcycling and recycling. It is believed that the educational program developed in this study can promote ethical fashion and foster a sense of value-based consumption. This program can be customized and flexibly adapted to different educational levels and institutional characteristics, making it accessible to a wide range of learners.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2828-2834
• /
• 2024

This research intends to recycle bone and incorporate it into concrete for radiation shielding application using Phy-X/PSD software. Cement, sand and granite were mixed in proportion of 0.5 kg:1 kg:1 kg to obtain sample A. Other concretes composing of cement, sand, granite and bone ash was in proportion 0.45 kg:1 kg:1 kg:0.05 kg, 0.1 kg:1 kg:1 kg:0.4 kg and 0.35 kg:1 kg:1 kg:0.15 kg to obtain samples B, C and D respectively. 0.5 water-to-cement (W/C) ratio was adopted throughout the mixes because the control mix contain the normal water quantity for normal hydration of cement. Replacing the bone ash for the cement in the fabricated concretes enhances their densities where the fabricated concretes' density decreased from 2.33 g/cm³ to 2.22 g/cm³ by raising the reinforcing bones fly ash concentration from 0 to 0.15 kg. Additionally, increasing the bones fly ash concentration within the fabricated concretes increases their linear attenuation coefficient (LAC) where the fabricated concretes' μ values at 0.662 MeV reach 0.181 cm^-1, 0.178 cm^-1, 0.174 cm^-1, and 0.171 cm^-1, respectively for concretes A, B, C, and D. The use of other local materials is recommended, as it improves waste management being the major aim of the sustainable development goal.