• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.4
• /
• pp.51-58
• /
• 2008

This paper presents the effect of acid treatment on the removal of metals and the brightness of pulp. The bleached kraft pulps, metal-absorbed pulps and recycled pulps((ONP, OCC, MOW, and SC) were treated with the acidic solutions. Among metals in the bleached kraft pulps, Cu, Ca and Mg were removed easily by the acid washing, whereas Fe, Al and Si were not removed. The acid washing also removed distinctly metals from the metal-absorbed pulps. The metals absorbed in pulps reduced the brightness (%, ISO). Especially, Fe was the most detrimental metal. However, the brightness which was decreased by metals was restored to the status quo by the acid washing. The level of metals in recycled pulps was gradually reduced after the first flotation and acid treatment. Hence, the degree of metal removal by the acid washing was mainly dependent upon the kinds of waste pulps and metal ions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.2
• /
• pp.86-91
• /
• 1999

A new test method has been developed for a quantitative evaluation of macro-stickies in recycled pulps. The method uses a fine slot screen to separate a sticky particles form fiber in the pulp samples. The obtained sticky particles were spread on filter paper and covered with silicon carbide powder in order to make the stickies area with sufficient contrast between stickies and background. The stickies are then counted by a scanner-based image analysis system. The validity of this evaluation method of stickies of KOCC, ONP and white ledger wastepaper recycling plants respectively. It is shown that this method can be applied for a quantitative determination of stickies content in various recycled pulp samples. With this testing method, reproducible and reliable data were obtained for the actual mill pulp samples.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.2 s.110
• /
• pp.78-86
• /
• 2005

Hwaseonji(Korean traditional paper) used for writing and painting has been made from the mulberry bast-fiber and the short-length fiber pulps, wood pulps. However, besides wood pulps, other short-length fiber pulps also can be used instead of wood pulps. Hence, this research was carried out to make the various Hwaseonjis with the different properties, using the five kinds of short-length fiber pulps respectively. The short-length fiber pulps used in this research were softwood bleached kraft pulp(SwBKP) hardwood bleached kraft pulp(HwBKP), rice-straw bleached sulfite pulp(RsBSP), bamboo bleached kraft pulp(BbBKP) and recycled pulp from vellem paper(RP). And, the mixture ratios of the mulberry bast-fiber pulp and short-length fiber pulps were 100:0, 80:20, 60:40, 40:60 and 20:80. After various Hwaseonjis were made from different mixtures mentioned above with hand-made method, physical properties and chinese ink blot property of each paper were measured. The strengthes were the highest in the Hwaseonji made from the mixture of the mulberry bast-fiber pulp and SwBKP. However, chinese ink blot property and smoothness were better when RsBSP, BbBKP or RP were mixed into the mulberry bast-fiber pulp. As a result, the various kinds of Hwaseonjis which the users can choose based on their needs were made.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.1
• /
• pp.93-101
• /
• 2015

The purpose of this study is to examine the reusability of the fluff pulp recycled from paper diaper. To do this, the physical and optical properties of each handsheet made from these fluff pulp sample as well as the properties of the fiber recycled from paper diaper were analyzed and compared with those of non-recycled diaper fluff pulp samples and conventional pulp samples. These comparisons show that the characteristics of fiber such as length, width, curl, kink of the pulp recycled from paper diaper were similar to those of non-recycled diaper fluff pulp as well as to those of commercial pulp. The fine content of recycled diaper fluff pulp was lower than that of other pulp samples, while the ash content of the former was higher than that of the latter. Furthermore, it was also found that the bulk of handsheets made from the recycled fluff pulp was higher than that of other pulp samples, while the formation of the former was worse than that of the latter. The mechanical properties of the handsheet sample made from the recycled diaper fluff pulp was higher than those of the unused diaper fluff pulp and was lower that those of commercial fluff pulp and softwood tissue pulp handsheet. But, it was higher than that of hardwood tissue pulp handsheet. The optical properties of recycled diaper fluff pulp handsheet was lower than those of each handsheet samples made from other pulps due to its low fine content.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.1
• /
• pp.21-38
• /
• 1993

In order to investigate the influence of recycling, a laboratory method simulating the papermaking process was used for assessing the effects of recycling on fiber properties. Sw-BKP, Hw-BKP and BGP were disintegrated and beaten to about 42$^{\circ}$SR-44$^{\circ}$SR by a valley beater. After beating, these pulps were dewatered by centrifuge and dried at 90$^{\circ}C$ for 72hrs. This recycling process(sequence of wetting, defiberating, dewatering and drying) was repeated seven times. Physical, mechanical and optical properties of recycled pulps were evaluated by TAPPI Standards. Morphological changes occurred through recycling process was observed by SEM. Sheet density decreased with recycling. The largest drop in density occurred during the first recycling. The porosity values decreased with recycling. Mechanical properties such as tensile, burst strength and folding endurance, decreased with recycling. However tear strength of Sw-BKP and mixtured pulp increased at the first recycling. Optical properties such as brightness, opacity and light scattering coefficient, increased with recycling. However, brightness of mixtured pulp gradually decreased with recycling. Fibrillated outer layer of the fiber was gradually removed from the surface with recycling. As a result of recycling, crinkles on the fiber surface were found to be more folded.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.2
• /
• pp.37-46
• /
• 1995

The substitution of carboxymethylated hydroxyl group in pulp revealed more hydrophilic than hydroxyl group. And then fibers were more flexible, swell more which leads to better conformation between fibers in turn this raise paper strength. In this paper, we tried to chemical modifyings of recycled fiber, OCCs(old corrugated containers). Many researchers have examined chemical modification of papermaking fiber by partial carboxymethylation(PCM) using a organic solvent processes. We made modified PCM processes adapted waters m replace of the organic solvent. Our testings for the optimum conditions on the new method, conditions as reaction time, temperature, liquor ratios were designed likely plant system. Freenesses(SR$^{\circ}$) were increased following on carboxyl content of the samples. Handsheets of untreated samples and partial carboxymethylated OCCs were made by optimum conditions on different concentrations of the reagent. As results, maximum 25% strength increasing effects were obtained by the new method.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.11 no.1
• /
• pp.33-40
• /
• 2005

This study was carried out for effective utilization of recycling resources to investigate the repulping conditions of car air filter waste paper and to evaluate the application into corrugating medium papermaking by blending these repulped pulps. Car air filter waste paper was made of virgin BKP and it was dipped into phenol resin solution. It was well disintegrated by laboratory Valley beater with 10%(basis on oven-dried pulp weight) NaOH addition and defoamer usage. The optimal temperature, beating consistency and treatment time were mainly $40^{\circ}C$, 1% and $30{\sim}40$ minutes, respectively. Handsheets were prepared with various blending ratios between air filter recycled pulp and KOCC. In the case of $10{\sim}20%$ substitution with air filter recycled pulp, physical properties reductions as compressive strength and burst strength of sheets were lower than others. These results showed more favour than the partial substitution of KOCC for corrugating medium even though some strength reduction of paper. It was also observed that the waste water of air filter recycling was not affective to environmental problems.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.4 s.112
• /
• pp.8-17
• /
• 2005

WCT (Wet compaction test) is a new fiber evaluation method developed recently by Seo and its test results can be used as a predictor for pulp quality and its paper property Bleached chemical pulps (SwBKP, HwBKP), recycled pulp (OCC), and mechanical pulp (BCTMP) were used for the furnishes to be tested by WCT We compared the WCT results to conventional fiber evaluation tests such as WRV (Water Retention Value), free ness, and fiber length in this study, and found that WCT always gave better regression coefficients in relation to pulp quality (drainage), and paper properties (density, tensile, tear, and burst strength). WCT may be used on-line in papermachine.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.8
• /
• pp.1255-1261
• /
• 2006

An alkaliphilic bacterium, Bacillus sp. strain BK, was found to produce extracellular cellulase-free xylanolytic enzymes with xylan-binding activity. Since the pellet-bound xylanase is eluted with 2% TEA from the pellet of the culture, they contain a xylan-binding region that is stronger than the xylan-binding xylanase of the extracellular enzyme. The xylanases had a different molecular weight and xylan-binding ability. The enzyme activity of xylanase in the extracellular fraction was 6 times higher than in the pellet-bound enzyme. Among the enzymes, xylanase had the highest enzyme activity. When Bacillus sp. strain BK was grown in pH 10.5 alkaline medium containing xylan as the sole carbon source, the bacterium produced xylanase, arabinofuranosidase, acetyl esterase, and $\beta$-xylosidase with specific activities of 1.23, 0.11, 0.06, and 0.04 unit per mg of protein, respectively. However, there was no cellulase activity detected in the crude enzyme preparation. The hydrolysis of agricultural residues and kraft pulps by the xylanolytic enzymes was examined at 50$^{\circ}C$ and pH 7.0. The rate of xylan hydrolysis in com hull was higher than those of sugarcane bagasse, rice straw, com cop, rice husk, and rice bran. In contrast, the rate of xylan hydrolysis in sugarcane pulp was 2.01 and 3.52 times higher than those of eucalyptus and pine pulp, respectively. In conclusion, this enzyme can be used to hydrolyze xylan in agricultural residues and kraft pulps to breach and regenerate paper from recycled environmental resources.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.5 s.118
• /
• pp.9-15
• /
• 2006

Wet compaction test (WCT) is a fiber evaluation method where wet fibers are compressed at one side of a cylinder and water drains out from the other side. The consistency of the fiber furnishes and their pressures are recorded during the test. In the previous study we found that WCT results always gave better coefficients of determination in fiber furnish drainage, and paper properties (density, tensile, tear, and burst strength) than those of WRV (water retention value). Fiber freeness and fiber length correlated well with drainage and tear strength of the furnishes, respectively; however, their correlations were very much improved by combining the WCT results. In this study, we used the WCT test for fractionated fiber furnishes to see whether improvement of the WCT is possible. We found that strength properties such as breaking length and burst index were correlated better with the fractionated long fiber furnishes. Drainage was greatly affected by the presence of short fiber furnishes. We used bleached chemical pulps (SwBKP, HwBKP), recycled pulp (OCC), and mechanical pulp (BCTMP) as fiber furnishes in this study. Fiber fractionation can be performed on-line in these days by using multifractor and WCT can be used as an on-line test in papermachine in the future.