• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.1
• /
• pp.68-73
• /
• 2002

High temperature during sprout emergence period of potato (Solanum tuberosum L.) is a major limitation to the yield of fall-grown potato in Korea. To explore the possibility of improving the yield of fall-grown potato through recycled paper mulching, the changes of soil environment and the growth and yield of potato cv. Daeji as affected by three mulching treatments of non-mulched control, recycled paper mulching (RPM), and black polyethylene film-mulching (BPFM) were examined over two fall seasons at Suwon, Korea. The mulching materials were a recycled mulch paper with 110 g/$m^2$ and a thickness of 0.1 mm, which was manufactured from old corrugated containers for this experiment and a commercial black polyethylene film with a thickness of 0.01mm. On an average throughout the growing period, the soil temperature with RPM at the 5-cm depth was lower by 0.4-1.1$^{\circ}C$ than that of the control. The maximum temperature during daytime in RPM was lowered by approximately 1 to 5$^{\circ}C$ according to the weather condition during emergence period, the difference being great on a fine day. The soil temperature with BPFM was much higher than the control. The effect of the mulching treatments diminished as the canopy became developed. The mulching treatments were more advantageous than the control in the conservation of soil water. Moreover, RPM and BPFM efficiently suppressed the occurrence of weeds until the potato harvest. RPM improved the emergence significantly due to lower soil temperature, whereas BPFM showed much poorer emergence than the control. Growth after emergence and yield were significantly higher in RPM than in the control and BPFM. It was concluded that the significantly improved yield in RPM compared to that in the control was mainly due to the improvement of the sprout emergence and tuber growth accompanied by lower soil temperature and better conservation of soil water.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.55-62
• /
• 2005

This study was conducted to evaluate the application of a bio-composite made by the addition recycled fiber board flour as filler. Recycled fiber board (high density fiber board, HDF) flour was added to polyolefin polymer low density polyethylene (LDPE) and polypropylene (PP) for the preparation of bio-composite materials. The mechanical properties and processability of the recycled HDF flour filled LDPE and recycled HDF flour filled PP bio-composites were then measured and compared to those of wood flour (WF) and rice-husk flour (RHF) filled LDPE and PP bio-composites, respectively. The tensile and impact strengths of the recycled HDF flour filled LDPE and PP bio-composites had similar mechanical properties to those of the WF and RHF filled LDPE and PP bio-composites. To measure the processability, torques of the bio-composites were also measured. The torques of the HDF flour filled LDPE and PP bio-composites were lower than those of the WF and RHF filled polyolefin (PP and LDPE) bio-composites with a filler loading of 30 wt.%. This result showed definite processability, which was not related with the distribution of the particle size of the material added. The recycled fiber board flour filled bio-composites showed applicability as substitutes for the bio-composites currently used in the bio-composites industry.

• Steel and Composite Structures
• /
• v.45 no.1
• /
• pp.147-157
• /
• 2022

This study assessed the compressive and tensile strengths and modulus of elasticity of waste polyethylene terephthalate (PET) using the ASTM standard tests. In addition, short carbon and glass fibers were mixed with waste PET to examine the improvements in ductility and strength during compression. The bonding was examined via field-emission scanning electron microscopy. The strength degradation of the waste PET tested under UV was 40-50%. However, it had a compressive strength of 32.37 MPa (equivalent to that of concrete), tensile strength of 31.83 MPa (approximately ten times that of concrete), and a unit weight of 12-13 kN/m3 (approximately half that of concrete). A finite element analysis showed that, compared with concrete, a waste PET pile foundation can support approximately 1.3 times greater loads. Mixing reinforcing fibers with waste PET further mitigated this, thereby extending ductility. Waste PET holds excellent potential for use in foundation piles, especially while mitigating brittleness using short reinforcing fibers and avoiding UV degradation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.2
• /
• pp.95-101
• /
• 2010

For the development of higher-sizing performance of paper, a sizing agent using recycled PET was synthesised. Polyester resin was extracted from wasted PET by subcritical hydrolysis and finally modified to synthetic sizing agent by mixing water-disperse PET with triphenyl phosphite(TPP). The modified PET was considered as an internal sizing agent in different wet-end papermaking conditions. The optimum condition in sizing efficiency was obtained in initial pH of 6.5 in case of rosin+alum system, and 7.5 in case of rosin+alum+PET system, respectively, and in addition amount of PET 3%. The sizing efficiency was also closely related according to the fiber properties of wet-end slurry, such as virgin fibres from UKP and recycled fibres from KOCC. The application of modified PET was good in strength improvement of paper, specially in tensile strength.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.85-90
• /
• 2012

In this study, temperature profile of the fly ash concrete were studied in accordance with the change of heating curing method combination for the slab concrete in order to develop efficient protection method of the concrete subjected to $-20^{\circ}C$. The slab concretes with the size of $1200mm{\times}600mm{\times}200mm$ were fabricated with W/B of 50% and exposed to $-20^{\circ}C$ for 7 days. Five different combinations of heat curing methods were applied to the slab concrete specimen; two combinations of heat supplying by electrical heater and surface heat insulation material such as polyethylene film and quadrupled layer bubble sheet based on heat enclosure installment; three combinations of heating coil embedment and surface heat insulation materials such as polyethylene film, sawdust and quadrupled layer bubble sheet based on heat enclosure installment. Test results showed that by applying both heating coil and bubble sheet and heat enclosure, the concrete exposed to $-20^{\circ}C$ can be effectively protected from early-age frost damage.

• Journal of the Korean Society of Safety
• /
• v.18 no.4
• /
• pp.92-97
• /
• 2003

The purpose of this study is heavy metal absorption of recycled PET(poly ethylene terephatalate) NWF(non woven faric). The results of test are summarized as follows; Heavy metal abworption rates in Ni ions were higher then Zn and Cu ions, whereas heavy metal absorption rates by sulfonation times were not different. The heavy metal absorption times have a higher tendency from 60 min to 120 min. There were significant negative correlations among the amount used CSA(Chloro Sulfuric Acid) and the amount of absorption Zn(r = -0.33784, p < 0.05), Cu(r = -0.61177, p < 0.01) ions, whereas correlations between heavy metal absorption rates and sulfonation times were not significant. There were significant positive correlations among the amount of absorption Zn ions and the amount of absorption Ni(r = 96475, p < 0.014), Cu(r = 0.51614, p < 0.01) ions, likewise the positive correlations between the amount of absorption N ions and the amount of absorption Cu(r = 0.54766) ions were significant(p < 0.01).

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.709-712
• /
• 2008

This study evaluated a mechanical performance of recycled polyethylene terephthalate(PET) fiber reinforced concrete on chemical environment. This study applied to three types of environmental condition including alkaline, salt, $CaCl_2$ in water solution and measured a reduction of mechanical performance of recycled PET fiber reinforced concrete for 30, 60, 90 days under chemical solutions. The mechanical performance of recycled PET fiber reinforced concrete evaluated to carried out a compressive strength test. As the result of test, it was found that the mechanical performance decreased as the exposure time to alkaline environment and indicated a excellence performance under salt, $CaCl_2$ environment conditions.

• Geomechanics and Engineering
• /
• v.33 no.1
• /
• pp.11-18
• /
• 2023

This study explores a new energy partitioning approach to determine the fracture toughness of 3-D printed pristine/recycled high density polyethylene (HDPE) blends employing the essential work of fracture (EWF) concept. The traditional EWF approach conducts a uniaxial tensile test with double-edge notched tensile (DENT) specimens and measures the total energy defined by the area under a load-displacement curve until failure. The approach assumes that the entire total energy contributes to the fracture process only. This assumption is generally true for extruded polymers that fracture occurs in a material body. In contrast to the traditional extrusion manufacturing process, the current 3-D printing technique employs fused deposition modeling (FDM) that produces layer-by-layer structured specimens. This type of specimen tends to include separation energy even after the complete failure of specimens when the fracture test is conducted. The separation is not relevant to the fracture process, and the raw experimental data are likely to possess random variation or noise during fracture testing. Therefore, the current EWF approach may not be suitable for the fracture characterization of 3-D printed specimens. This paper proposed a new energy partitioning approach to exclude the irrelevant energy of the specimens caused by their intrinsic structural issues. The approach determined the energy partitioning location based on experimental data and observations. Results prove that the new approach provided more consistent results with a higher coefficient of correlation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.3
• /
• pp.309-316
• /
• 2011

Canoes are usually made from wood or FRP. However, today environment-friendly materials are preferred, and hulls made of FRP are prohibited in some countries. Polyethylene can be recycled and so is suitable for synthetic canoe construction. We used 3D Boat-Design to determine the hydrostatic properties of the canoe. Flow-structure coupled analysis was performed using ANSYS Workbench R12.1. The hull pressure and passenger weight were considered as canoe loading factors. The key parameters for the canoe are the design variables. The constraints are as follows: (1) The maximum stress must not exceed 50% of the polyethylene yield stress; and (2) the canoe weight must not exceed 50 kg. The optimal structural conditions were obtained by the response optimization process. The components of the canoe hull were manufactured from polyethylene pipes and joined by thermal fusion methods. Tests showed that the polyethylene canoe had better performance than existing canoes.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.111-120
• /
• 2010

This study evaluated strength properties of recycled asphalt concretes using warm-mix technology. Granite with maximum size of 13mm and penetration grade of 80-100 virgin binder were used for mixing in recycled mixtures. Mix design was performed using 20% and 30% RAP(coarse : fine= 6 : 4) contents. GPC, penetration, absolute viscosity and kinematic viscosity were measured for determining ratio of two warm-mix additives (Evotherm and Sasobit). Low-density polyethylene(LD) used as asphalt modifier for improving stiffness of recycled WMA mixtures in this study. Therefore, a total of 11 mixtures were prepared in this study; 8 warm-mix recycled mixtures(2 RAP contents${\times}$2 warm-mix additives${\times}$2 modifiers), 2 hot-mix recycled mixtures and 1 HMA virgin mixture(control). Deformation strength, indirect tensile strength, moisture sensitivity, permanent deformation by wheel tracking tests were measured out for evaluating fundamental properties of recycled asphalt concretes using warm-mix technology.