• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.425-432
• /
• 2021

본 논문은 생활계 복합재질 폐플라스틱을 재활용한 물질재활용 제품의 물성을 향상시키기 위한 방안으로서 단일 재질 폐플라스틱인 r-LDPE(Recycled Low Density Polyethylene, r-LDPE) 사용량을 변화시켜 물질재활용 제품의 물성을 평가·분석하였다. 그 결과 r-LDPE 사용량이 증가할수록 생활계 복합재질 폐플라스틱 물질재활용 제품의 인장강도, 연신율은 증가하는 경향을 나타내었지만 회분은 감소하는 경향을 나타내었다. 생활계 복합재질 폐플라스틱 재생원료에 r-LDPE 사용량을 5% 이상 혼입 사용할 경우 생활계 복합재질 폐플라스틱의 물질재활용 제품인 인삼재배시설용 지주대의 품질기준인 GR M 3093-2021을 안정적으로 만족시키는 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권5호
• /
• pp.135-143
• /
• 2007

본 논문은 장기 지속하중을 경험한 순환골재 콘크리트 보의 휨 거동특성 평가를 위하여 수행된 실험결과를 다룬 내용으로 이를 위하여 천연골재를 사용한 시험체, 순환굵은골재로 100% 대체된 시험체와 순환잔골재로 50% 대체된 시험체 등 총 3개의 보가 계획 및 제작되었다. 1년간 재하된 지속하중을 경험한 이후 파괴시까지 다시 재하된 철근콘크리트 보의 단기 휨거동에서 초기 강성 및 최대내력은 골재의 종류에 관계없이 유사하게 나타났으나 최대내력시의 강성이 순환골재를 사용한 경우 천연골재에 비해 28 및 23% 작게 나타났고 인장철근 및 압축측 콘크리트의 변형률도 순환골재를 사용한 시험체가 천연골재를 사용한 시험체보다 다소 크게 나타났다. 그러나 순환골재를 사용한 철근콘크리트 보에 대한 실험값을 ACI규준 의한 계산값과 비교한 결과 크게 나타났으며 전반적으로 천연골재를 사용한 철근콘크리트 보와 대등한 휨 성능을 보였다.

• 펄프종이기술
• /
• 제33권4호
• /
• pp.7-14
• /
• 2001

Recycled fibers usually give slow drainage in the paper forming process, which limits the application of more refining to the recycled fibers for improving paper strength and formation. To use recycled fibers more effectively, especially OCC, developing very efficient handling technique of short fibers and fines is inevitable. We tried to make hard flocs of fractionated short fibers and fines, which were the main cause of slow drainage, by adding excessive amount of retention aid selectively on them. This technique was proved to increase drainage considerably, but to decrease strength properties, compared to the conventional technique of adding the same amount of polymers to the whole furnish in the lab test. The bonding capability of short fibers and fines in Korean OCC was very poor. Various chemical treatment on the short fibers and fines of the Korean OCC did not improve their bonding and optical properties. One of the reasons of no improvement in their properties was their high amount of ashes.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.231-244
• /
• 2020

As a way of finding value-added materials from waste medium density fiberboard (MDF), this study characterized cellulose nanocrystals (CNCs) isolated by ammonium persulfate (APS) oxidation using recycled MDF fibers. Chemical composition of the recycled MDF fibers was done to quantify α-cellulose, hemicellulose, lignin, nitrogen, ash and extractives. The APS oxidation was performed at 60 ℃ for 16 h, followed by ultrasonication, which resulted in a CNC yield of 11%. Transmission electron microscope images showed that rod-like CNCs had an average length and diameter of 167±47 nm and 8.24±2.28 nm, respectively, which gave an aspect ratio of about 20. The conductometric titration of aqueous CNCs suspension resulted in a carboxyl content of 0.24 mmol/g and the degree of oxidation was 0.04. Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy clearly showed the presence of carboxyl group on the CNCs prepared by the APS oxidation. The change of pH of the aqueous CNC suspension from 4 to 7 converted the carboxyl group to sodium carboxylate group. These results showed that the APS oxidation was facile and CNCs had a one-step preparation method, and thus suggested an optimization of the oxidation condition in future.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.489-494
• /
• 1998

This paper describes the possibility to reuse concrete waste produced by demolition of reinforced concrete structures as aggregate for concrete from the viewpoint of strength. Concrete rubble obtained from the demolished buildings at Taejon were crushing machine to reuse as coarse aggregate. The strength properties, such as compressive strength, splitting tensile strength, bending strength and shear strength, of recycled and normal concrete were examined and compared experimentally when water cement ratio was varied. From the results of this study, it was thought that in case of non-washed aggregate concrete, strength properties of recycled coarse aggregate is similar to that of normal concrete, In W/C 55%~45%, stress-strain curve of recycled concrete shows more stable than that of normal concrete, while in W/C 35%, it shows brittle behavior.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.57-58
• /
• 2009

기존연구 결과에 의하면 순환굵은골재 콘크리트를 사용한 경우와 순환잔골재 콘크리트를 사용했을 경우 모두에서 구조부재의 내력저하는 나타나지 않고 천연골재와 동등한 성능을 나타내었다. 이러한 연구결과를 바탕으로 순환굵은골재와 순환잔골재를 혼합 사용한 실물부재 콘크리트보에서 역학적 성능평가를 목적으로 하고 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.33-34
• /
• 2009

본 연구는 순환굵은골재와 잔골재의 치환율을 변수로 하여 5개의 실물모형 기둥 실험체를 제작하여 축하중하에서 실험을 진행하였으며 KCI2007에서 규정하고 있는 압축 응력값을 만족하는 것으로 나타나 KCI 규준식은 순환골재를 사용한 철근콘크리트 기둥 설계에서 적용 가능한 것으로 판단된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.101-103
• /
• 2011

Various desired performances of concrete cannot be always obtained by current conventional mix proportion methods for recycled aggregate concrete (RAC). This paper suggests a new design method of mix proportion for RAC to reduce the number of trial mixes using genetic algorithm (GA) which has been an optimization technique to solve the multi-object problem. In mix design method by GA, several fitness functions for the required properties of concrete, i.e., slump, strength, price, and carbonation speed coefficient were considered based on conventional data or fitness function. As a result, various optimum mix proportions for RAC that meet required performances were obtained and the risk evaluation was also conducted for selected mixtures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.399-400
• /
• 2010

본 연구에서는 순환재료를 사용한 그린 변형 경화형 시멘트 복합체의 압축, 휨 및 직접 인장거동 특성에 대하여 평가한다. 순환재료로 재생 PET 섬유, 플라이애쉬 및 폐콘크리트로부터 생산된 순환잔골재 등이 사용되었다. 실험결과, 5개의 덤벨형 인장 시험편의 직접 인장강도는 4.76MPa, 휨 및 압축강도는 7.40MPa 및 38MPa로 각각 평가되었다.

• Composites Research
• /
• 제31권5호
• /
• pp.202-208
• /
• 2018

In this paper, mechanical and hygroscopic properties of teak sawdust and recycled polypropylene (RPP) composites are evaluated and compared with virgin polypropylene (VPP) matrix based composites. Verities of composites are prepared by variation in the plastic types, wood plastic ratio and the addition of coupling agent in the formulations. Mixing of wood sawdust and polypropylene is done by a twin screw extruder, and then sheets of wood plastic composites (WPCs) are produced by using the compression molding method. The results show that recycled matrix composites exhibit better tensile, flexural strength with low impact strength than virgin matrix based composites. Recycled composites show low water absorption and thickness of swelling than virgin matrix based composites. The results confirm that wood content in the polymer matrix affects the performance of composites while presence maleated polypropylene (MAPP) improves the properties of the composites significantly. Developed RPP matrix composites are as useful as VPP matrix composites and have the potential to replace the wood and plastics products without any adverse effect of the plastics on the environment.