• Archives of Metallurgy and Materials
• /
• 제66권4호
• /
• pp.987-990
• /
• 2021

As the amount of high-capacity secondary battery waste gradually increased, waste secondary batteries for industry (high-speed train & HEV) were recycled and materialization studies were carried out. The precipitation experiment was carried out with various conditions in the synthesis of LiNi_0.6Co_0.2Mn_0.2O₂ material using a Taylor reactor. The raw material used in this study was a leaching solution generated from waste nickel-based batteries. The nickel-cobalt-manganese (NCM) precursor was prepared by the Taylor reaction process. Material analysis indicated that spherical powder was formed, and the particle size of the precursor was decreased as the reaction speed was increased during the preparation of the NCM. The spherical NCM powder having a particle size of 10 ㎛ was synthesized using reaction conditions, stirring speed of 1000 rpm for 24 hours. The NCM precursor prepared by the Taylor reaction was synthesized as a cathode material for the LIB, and then a coin-cell was manufactured to perform the capacity evaluation.

• 콘크리트학회논문집
• /
• 제17권3호
• /
• pp.335-342
• /
• 2005

천연 건설자원이 고갈되어감에 따라, 심각한 환경오염을 일으키고 있는 각종 산업폐기물의 재활용을 통해 새로운 건설소재를 개발하기 위하여, 폐플라스틱과 폐 콘크리트를 재활용한 폴리머콘크리트의 역학적 특성을 분석하였다. 본 연구에서는 폐 PET를 재생한 불포화 폴리에스테르 수지를 재생골재와 결합시켜, 재생골재 및 수지변화량에 따른 역학적 특성과 내화학성 실험을 실시하였으며 실험결과, 재생수지 및 골재를 사용한 폴리머콘크리트(RPC)의 강도는 수지의 함량이 증가함에 따라 차츰 증가하는 추세를 보였다. 하지만 어느 수지량의 한계점 (대략 $13{\~}17\%$)에선 더 이상의 강도증가는 나타내지 않고 있음을 확인할 수 있었다 또한 재생골재 함량이 증가할수록 강도와 탄성계수는 감소하였으나 수지량 $17\%$에서는 이러한 현상이 나타나지 않았다. 선형대수회귀 분석을 통해 수지량 $9\%$일 때의 압축강도와 휨, 할렬 인장강도의 상관관계를 확인한 결과 높은 신뢰도를 보임을 알 수 있었다. 하지만 수지량이 증가함에 따라 뚜렷한 상관관계가 나타나지 않는 경향을 나타내었다. 재생골재를 사용한 폴리머콘크리트의 내화학성에 따른 중량변화와 강도실험은 비교적 산과 염에 강한 특성을 나타내었다. 그리고 염산 $30\%$의 수용액에선 알칼리수용액 $40\%$ 보다는 강한 저항성을 나타내었음을 압축강도 및 중량변화를 통해 확인할 수 있었다.

• 한국의상디자인학회지
• /
• 제20권2호
• /
• pp.47-62
• /
• 2018

This study examined recycled fashion design utilizing natural images for application to recent trends. This study is significant in that it presents the possibility of the development of recycled women's wear design by reflecting the characteristics and expressions of natural images and using denim material, which is the most common clothing material for everyday life. The results of this study are summarized as follows. First, five types of women's clothing was produced, pursuing a natural design with a soft and feminine silhouette. Second, the colors used were blue and white, which could represent nature. Third, as for materials, this study used clothing that was to be thrown away: four pairs of denim pants and two denim dresses. This study chose denim cloth, with its great value for reuse, because of the characteristics of the strong and durable fiber, because everyone has more than one article of clothing made from denim and because it can be easily sourced. Fourth, for textile motifs, this study expressed a peaceful natural scenery with tropical animals and plants. In addition, this study further emphasized natural images using transfer media printing. This study has significance in that it presented the possibility of recycled fashion design and expanded the range of utilization using transfer media printing, a dyeing treatment to reduce the environmental burden.

• 한국지반환경공학회 논문집
• /
• 제7권5호
• /
• pp.21-29
• /
• 2006

경량성토공법은 성토체 자중을 감소시켜 지반의 침하를 감소시키는 공법으로 작업의 편리성 등의 이유로 적용사례가 증가하고 있다. 이와 관련하여 스티로폼은 연약지반상에 경량성토재로서 활용할 수 있는 것으로 알려져 있다. 경량성토재로서 스티로폼의 사용은 응력증가를 최소화 할 수 있으며, 안정재 사용을 통하여 지지력 증대와 침하감소효과를 얻을 수 있다. 이에 본 연구에서는 연약점성토층 상부에 경량성토재를 포설하고 모형 지지력 실험과 유한요소해석을 실시하였으며, 그 결과를 바탕으로 경량성토재로서의 지지력 특성을 평가하였다. 실험결과 일반적인 성토재 보다 폐스티로폼을 이용한 성토재가 더욱 우수한 특성을 발휘하는 것으로 나타났다.

• 한국농공학회논문집
• /
• 제54권5호
• /
• pp.103-111
• /
• 2012

In this study, the full-scale laboratory model test on utilization of recycled aggregates and crushed stone as vertical drains to use an alternative material of sand in soft ground is performed. The settlement and pore water pressure were measured to evaluate the discharge capacity and filed application, and the results were compared and analyzed through the finite element method. The measured and estimated settlement in all vertical drain materials decreases gradually with the load increase. The measured settlement 6.55~8.63 mm, and the estimated by the Hyperbolic model was 7.45~7.92 mm. So the model used for the analysis can be applied to the settlement estimation of the actual field. The variations of pore water pressure with time showed constantly regardless of the load in all vertical drainage materials. The pore water pressure was similarity to that of sand after rapid drawdown. Therefore, it was applicable to the field because discharge capacity was enough to be an alternative material to the sand which had been being used as the vertical drains.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.227-236
• /
• 2018

As consciousness of safety becomes an important social issue, the demand for protective clothing is increasing. Conventional flame-retardant cotton working wear has low durability, and working wear with m-aramid fibers are stiff, heavy, less permeable, and expensive. In this study, recycled m-aramid and cotton have been blended to produce woven fabric of different compositions to enhance high performance and comfort to solve aforementioned problems. The fabrics were analyzed according to constituents and various structural factors. Mechanical properties were measured using KES-FB system. The measured thermal properties are TGA, $Q_{max}$, TPP and RPP. Fabric with polyurethane yarn covered by m-aramid/cotton spun yarn is observed to have good wearability. The fabric of open end spun yarn showed more stiffness than that of ring spun yarn. The sample with the high count of yarn has more smooth surface. In addition, high m-aramid content fabric is considered to have relatively high stiffness when using as clothing. In TGA the fabric with higher m-aramid content showed more stable decomposition behavior. The fabric having rough surface showed lower heat transfer properties in $Q_{max}$. The influence of the fabric thickness was important in convection and radiant heat test.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.167-168
• /
• 2022

Recently, starting with the permanent suspension of Gori 1 in Korea, the importance of the disposal of concrete structures in nuclear power plants has emerged, and environmental and safety are required to be proved accordingly. Safe radioactive waste disposal technology that immobilizes harmful radioactive elements, which are by-products of nuclear power, inside a solid matrix and recycling measures are needed to secure an efficient waste disposal space. This study was conducted to confirm whether recycled cement generated in the process of radioactive concrete treatment can be used as a solidifying material for radioactive waste treatment. In order to simulate the concrete exposed to radiation, aqueous solutions of Di-water, CsCl 1M, and CoCl₂ 1M were used as blending water at W/B 0.5. Tricalcium phosphate and Prussian blue were substituted with 5 wt.% based on the weight of recycled cement as a binder to improve solidification performance, and their hydration characteristic was analyzed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.73-74
• /
• 2023

In this paper, the characteristics of soil concrete were examined using industrial waste red mud and construction waste circulating aggregate, and if unit cement of 250 kg/m³, it can be used as a soil packaging material by meeting the compressive strength standards for parking lots of SPS-KSCICO-001-2006:2020.

• 대한환경공학회지
• /
• 제27권5호
• /
• pp.486-490
• /
• 2005

본 연구에서는 일반(천연)모래를 대체하여 폐콘크리트 재생잔골재(이하 재생모래)를 하수관거 모래기초용 재료로 활용하였을 경우 재생모래의 지반적 거동(침하)에 대한 다양한 적용성 평가를 실시하였다. 이를 위해 상대적 재료 특성 차이에 따른 침하량 전산모사(FLAC 사용)를 실시하였으며 실내 재하 실험을 통한 즉시침하 평가, 우수에 의해 예상되는 재료특성 변화를 살펴본 후 실규모급 현장 적용성 평가를 실시하였다. 그 결과 FLAC으로 예측된 재생모래기초의 침하량은 $5.0{\times}10^{-6}\;m$ 미만이었으며, 실내 침하실험에서는 침하가 발생되지 않았다. 또한 용출에 인한 재료특성(흡수율 등) 변화 역시 미미하였다. 마지막으로 실규모급 현장 시공의 침하 모니터링 결과, 원지반의 압밀침하로 예상되는 5 mm의 침하만이 발생하였다. 이를 통해서 재생모래의 하수관 모래기초 적용성은 충분한 타당성을 가지는 것으로 판단된다.

• Composites Research
• /
• 제35권4호
• /
• pp.242-247
• /
• 2022

본 연구는 기존의 폐CFRP를 재활용하여 얻은 재생 탄소섬유를 다시 CFRP 제조에 활용하는 대신 탄소를 모재로 구성하는 탄소/탄소 (Carbon/Carbon, C/C) 복합소재를 제조하는 원료로 활용하기 위한 것이다. 먼저 일반적으로 많이 활용되는 에폭시수지 복합재료의 열분해 공정에 산화-불활성 분위기 변환 기술을 적용하여 1~2% 수준의 잔탄률을 19%까지 향상시켰으며, 이를 통해 에폭시수지 활용 C/C 복합재료 제조 가능성을 확인하였다. 다만, 산화-불활성 분위기 제어를 통한 열분해 공정으로 얻은 탄소의 경우 산소결합도가 높아 추후 개선 연구가 필요한 것으로 나타났다. 또한, 폐CFRP를 열분해 열처리 후 파쇄 및 해쇄 공정을 통해 단섬유 C/C 복합재료 시험편을 제조하였으며 이에 대한 기계적 물성 평가를 통해 최적 공정 조건을 도출하였다.