• 콘크리트학회논문집
• /
• 제27권3호
• /
• pp.215-227
• /
• 2015

본 연구에서는 순환골재를 사용한 강섬유보강 콘크리트보의 전단거동을 알아보기 위하여 순환골재 치환율은 30 %로 고정하고, 전단경간비(a/d = 2, 3, 4), 인장철근비(${\rho}=0.8$, 1.27 %) 및 강섬유 혼입율($V_f=0$, 0.5, 0.75, 1%)을 변수로 한 총 24개의 강섬유보강 콘크리트보를 만들어 실험하였다. 또한 순환골재를 사용한 강섬유보강 콘크리트보의 전단강도를 여러 연구자들의 제안식과 비교 분석하였다. 즉, 순환골재를 사용한 강섬유보강 콘크리트보의 전단거동에 따른 전단내력을 분석하고, 강섬유보강 전단강도 제안식과 실험값을 비교하여 순환골재를 사용한 강섬유보강 콘크리트보의 사용가능성을 평가하고자 하였다. 대부분의 실험값이 제안식에 의한 이론값보다 높게 나타나 순환골재를 사용한 강섬유보강 콘크리트보를 구조부재로 사용하여도 무방하다고 판단된다.

• Advances in concrete construction
• /
• 제3권4호
• /
• pp.253-268
• /
• 2015

This paper investigates the influence of various mix design parameters on the characteristics of concrete containing recycled coarse aggregates and Nano-Silica using Taguchi method. The present study adopts Water-cement ratio, Recycled Coarse Aggregate (%), Maximum cement content and Nano-Silica (%) as factors with each one having three different levels. Using the above mentioned control parameters with levels an Orthogonal Array (OA) matrix experiments of L9 (34) has selected and nine number of concrete mixes has been prepared. Compressive Strength, Split Tensile Strength, Flexural Tensile Strength, Modulus of Elasticity and Non-Destructive parameters are selected as responses. Experimental results are analyzed and the optimum level for each response is predicted. Analysis of 28 days CS depicts that NS (%) is the most significant factor among all factors. Analysis of the tensile strength results indicates that the effect of control factor W/C ratio is ranked one and then NS (%) is ranked two which suggests that W/C ratio and NS (%) have more influence as compared to other two factors. However, the factor that affects the modulus of elasticity most is found to be RCA (%). Finally, validation experiments have been carried out with the optimal mixture of concrete with Nano-Silica for the desired engineering properties of recycled aggregate concrete. Moreover, the comparative study of the predicted and experimental results concludes that errors between both experimental and predicted values are within the permissible limits. This present study highlights the application of Taguchi method as an efficient tool in determining the effects of constituent materials in mix proportioning of concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.150-151
• /
• 2021

This study aims to achieve an enhancement in the quality of high strength concrete through a reduction in autogenous shrinkage by supplying the moisture needed for hydration through recycled aggregates that retain high amounts of moisture. The result showed that, moisture supply increased with the higher replacement rate, autogenous shrinkage dropped by up to 45 percent.

• 한국농공학회지
• /
• 제37권3_4호
• /
• pp.90-98
• /
• 1995

The recycled concrete, average compressive strength of which was 2l0kg/cm$^2$ or higher with slump range of 14~18cm, was prepared by replacing 25% and 50% by weight of coarse aggregate with recycled aggregate from waste concrete. Mix design method for crushed aggregates was used and all specimens were cured by normal moisture curing method. A plasticiser and a fly ash were added to the mix to improve performance of recycled concrete. Flexural strength, stress- strain relationship and fracture toughness were evaluated by comparing with those of normal concretes. Recycled concrete showed, in general, lower flexural strength and fracture toughness, and higher strain under the same stress level. Fly ash in the concrete had an effect of reducing the strength and fracture toughness on both normal and recycled concretes. Since fly ash is known to improve many properties of concrete, while reducing strength properties, decision for using fly ash should be made carefully depending on the intended usage of the recycled concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.322-325
• /
• 2003

Recently, as quality river aggregates like sands and gravels become scarce, use of crushed stones and sands, seashore sands, and seashore gravels is increasing abruptly. And, aggregates recycled from slags and waste concretes are used. However, since the converter slag easily expands and breaks due to free lime, differently from the blast-furnace slag, it is not suitable for use as concrete aggregates. Since the atomized steel slag aggregate has slippery surface and spherical shape, the mortar flowing characteristics improved as the atomized steel slag content increases, without regard to the aggregates coarseness and water/cement ratio. The flow characteristics loss rate of the mortar manufactured from steel slag aggregates was similar to that of the mortar manufactured from washed sand only. The compact strength of the mortar manufactured from coarse PS Ball were larger than that manufactured from washing sand only.

• 콘크리트학회논문집
• /
• 제28권4호
• /
• pp.445-454
• /
• 2016

노후 시설물의 증가에 따라 건설폐기물은 일정 수준까지 증가한 이후, 현재는 어느 정도 안정화 된 추세에 있지만, 전체폐기물 중에서 건설폐기물은 아직까지도 가장 큰 비중을 차지하고 있다. 또한, 천연 골재 채취 금지에 의한 골재 난 심화 및 골재 공급원 개발에 의한 국토훼손과 자연환경 파괴 등에 따라 환경복원에 막대한 국가예산 소요가 불가피한 상황이다. 이에 대한 대책 방안으로 국토교통부는 순환 골재 품질기준을 공포하여 순환 골재 품질에 따른 용도와 관리를 할 수 있도록 추진하고 있으나, 경제적 부가가치가 높은 용도로의 활용은 아직 저조한 실정이다. 따라서, 본 연구에서는 저자의 선행연구에서 제시한 탄산화 개질 조건인 $20^{\circ}C$, RH 60%, $CO_2$ 20%에서 순환 잔골재 4일, 순환 굵은 골재 14일간 탄산화를 실시한 순환 골재의 품질개선효과 및 이를 이용한 순환 골재 콘크리트의 성능 평가를 통하여 구조용 콘크리트로의 적용 가능성에 대한 실마리를 찾고자 한다. 그 결과, 탄산화 개질을 통하여 순환 잔골재의 흡수율이 0.91%, 순환 굵은 골재의 흡수율이 0.7% 저감되어 품질개선에 기여하였다. 또한, 탄산화 개질 골재를 이용한 순환 골재 콘크리트의 물리적 특성 및 내구성능이 일반 콘크리트와 유사한 결과를 나타내어 구조용 콘크리트로의 적용 가능성을 확인하였다.

• Computers and Concrete
• /
• 제24권3호
• /
• pp.193-206
• /
• 2019

Although concrete is the most widely used construction material, its deficiency in shrinkage and low tensile resistance is undeniable. However, the aforementioned defects can be partially modified by addition of fibers. On the other hand, possibility of adding waste materials in concrete has provided a new ground for use of recycled concrete aggregates in the construction industry. In this study, a constant combination of recyclable coarse and fine concrete aggregates was used to replace the corresponding aggregates at 50% substitution percentage. Moreover, in order to investigate the effects of fibers on mechanical and durability properties of recycled aggregate concrete, the amounts of 0.5%, 1%, and 1.5% steel fibers (ST) and 0.05%, 0.1% and 0.15% polypropylene (PP) fibers by volumes were used individually and in hybrid forms. Compressive strength, tensile strength, flexural strength, ultrasonic pulse velocity (UPV), water absorption, toughness, elastic modulus and shrinkage of samples were investigated. The results of mechanical properties showed that PP fibers reduced the compressive strength while positive impact of steel fibers was evident both in single and hybrid forms. Tensile and flexural strength of samples were improved and the energy absorption of samples containing fibers increased substantially before and after crack presence. Growth in toughness especially in hybrid fiber-reinforced specimens retarded the propagation of cracks. Modulus of elasticity was decreased by the addition of PP fibers while the contrary trend was observed with the addition of steel fibers. PP fibers decreased the ultrasonic pulse velocity slightly and had undesirable effect on water absorption. However, steel fiber caused negligible decline in UPV and a small impact on water absorption. Steel fibers reduce the drying shrinkage by up to 35% when was applied solely. Using fibers also resulted in increasing the ductility of samples in failure. In addition, mechanical properties changes were also evaluated by statistical analysis of MATLAB software and smoothing spline interpolation on compressive, flexural, and indirect tensile strength. Using shell interpolation, the optimization process in areas without laboratory results led to determining optimal theoretical points in a two-parameter system including steel fibers and polypropylene.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.226-227
• /
• 2021

Various attempts are being made to reduce carbon emissions through recycling of industrial by-products in the construction materials industry to reduce carbon emissions, and cement substitutes such as blast furnace slag and fly ash are widely used. Although it is suggested that the use of industrial by-product aggregate is possible in 'Aggregate', the use case of industrial by-product aggregate is very rare in the actual field. In this study, as an industrial by-product, fine slag aggregate is used as fine aggregate among aggregates that can be used as aggregate for concrete, and coarse aggregate is used as a substitute for natural aggregate. WWe tried to suggest various ways to expand the use of industrial by-product aggregates.

• 한국도로학회논문집
• /
• 제7권1호
• /
• pp.11-20
• /
• 2005

본 연구는 재활용 아스팔트 혼합물의 역학적 특성과 재생혼합물 내 바인더의 대형분자(Large molecular size : LMS)와의 상관성을 조사하였다. 재생 혼합물은 여러 가지 혼합 방법으로 제작하여 역학적 강도 시험을 수행하였고 재생혼합물 내의 RAP 굵은골재(R), 매트릭스(M) 및 신규 굵은골재(V) 시료에 코팅된 바인더의 노화 상태를 gel-permeation chromatography(GPC)를 통해 조사하였다. 재생혼합물 내 바인더의 노화상태 분석을 위한 혼합물 제조에는 원형골재 (13mm 강자갈)가 굵은골재로 사용되었다. GPC를 통한 재생혼합물 내 바인더의 노화상태를 분석한 결과 신 구 바인더의 노화 정도에 차이를 확인했으며, 혼합 방법에 따라 재생혼합물의 바인더 노화 상태가 서로 상이함을 확인하였다. 역학적 강도 특성과 R, M, V시료의 LMS에 대한 상관성분석결과 재생혼합물의 역학적 특성이 혼합물 내의 재료 중 어느 특정 재료의 바인더 LMS와 더 밀접한 상관관계를 보였다. 또한 LMS가 어느 정도 증가될 때까지는 강도특성이 향상되나 LMS가 보다 더 커지면 강도성능이 저하되는 경향을 보여 혼합물 제조시 제대로 회복되지 못한 노화된 아스팔트가 향후 노화가 더욱 진행되면 재생혼합물의 강도 성능이 저하될 것으로 판단되었다.

• 대한토목학회논문집
• /
• 제26권1A호
• /
• pp.213-218
• /
• 2006

본 논문에서는 최근 고도처리로 생산되는 순환골재의 품질을 분석하고, 이를 구조용 콘크리트에 적용하였을 경우 구조물의 설계 및 해석에서 가장 기초적으로 요구되는 물성인 압축강도와 탄성계수의 변화를 순환굵은골재 및 순환잔골재의 치환율에 따라 검토하고자 하였다. 실험결과 순환굵은골재 및 순환잔골재는 KS F 2573의 1종의 기준을 만족하였으며, 순환골재의 치환율이 증가할수록 순환골재콘크리트의 압축강도 및 탄성계수는 감소하는 경향이 나타났다. 특히 순환골재로 전량치환 하였을 경우의 압축강도와 탄성계수는 일반골재콘크리트 대비 약 13%와 약 31%가 저하되었다. 이러한 실험결과를 기초로 순환 골재 치환율에 따른 순환골재콘크리트의 압축강도 및 탄성계수 추정식을 새로이 제안하였으며, 기존의 국내외 실험결과와 비교하여 그 타당성을 검토하였다.