• 수산해양기술연구
• /
• 제37권3호
• /
• pp.232-239
• /
• 2001

제주도 연안 정치망의 어획성능을 향상시키기 위한 어구구조개량과 조업방식의 생력화에 대한 기초자료를 제공할 목적으로 현재 제주도 연안정치망 어장에 부설하여 조업을 행하고 있는 각망어구와 낙망어구의 어획성능을 비교하기 위해서 두 어장의 3년(1997~1999년)간 어획량을 분석하였는데, 그 결과는 다음과 같다. 1. 1997~1999년까지의 3년간의 총어획량은 각망어구가 18.7톤 낙망어구가 36.5톤으로 낙망구의 어획량이 2배 정도 많았다. 2. 1997~1999년까지의 오징어, 전갱이, 독가시와 방어의 어획량은 전체적으로 각망어구보다 낙망어구의 어척량이 1.8배 정도 많았다. 3. CPUE는 각망어구에서는 전갱이가 10.01k 오징어가 20.5kg, 독가시치가 18.0kg 방어가 2.2kg이며 낙망어구에서는 전갱이가 57.5kg, 오징어가 30.0kg, 독가시치가 25.0kg, 방어가 4.7kg였는데 전반적으로 낙망어구의 CPUE가 높게 나타났다. 4. 유어율은 각망어구에서는 전갱이가 64%, 오징어가 79%, 독가시치가 39% 방어가 14%이고 낙망어구에서는 전갱이가 18%, 오징어가 85%, 독가시치가 40%, 방어가 14%로 전체적으로는 각망어구의 유어율이 높게 나타났으나 여기서의 어획량은 낙망어구가 높게 나타났다.

• 수산해양기술연구
• /
• 제37권3호
• /
• pp.223-231
• /
• 2001

제주도 연안 정치망의 어획성능을 향상시키기 위한 어구구조개량과 조업방식의 생력화에 대한 기초자료를 제공할 목적으로 현재 제주도 연안 정치망 어장에 부설하여 조업을 행하고 있는 각망어구와 낙망어구의 어획성능을 비교하기 위해서 이들 실물어구를 1/30로 축소하고 제작한 모형어구를 이용하여 수조실험을 실시하고 고등어어군, 전갱이 어군, 독가시치 어군의 입·출망 행동을 관찰하고 해석하였는데, 그 결과는 다음과 같다. 1. 어군의 입망율은 경과시간 60초일 때 각망어구에서는 고등어 50%, 전갱이 18%, 독가시치 28%였고, 낙망 어구에서는 고등어 70%, 전갱이 60%, 독가시치 30%였다. 2. 어군의 출망율은 경과시간 60초일 때 각망어구에서는 고등어 70%, 전갱이 40%, 독가시치 24%였고, 낙망어구에서는 고등어, 전갱이가 각각 0%, 독가시치가 3%였다. 3. 어군의 잔존율은 경과시간 60초일 때 각망어구 에서는 고등어 30%, 전갱이 60%, 독가시치 76%였고, 낙망어구에서는 고등어, 전갱이가 각각 100%, 독가시치가 97%였다.

• 수산해양기술연구
• /
• 제44권2호
• /
• pp.112-119
• /
• 2008

The fundamental data on the catch fluctuation in the rectangular set net according to the tide age were developed based on the catches recorded from the year 1986 to 2004 in the coastal waters of Hamdeok, Jeju. Total catch by the rectangular set net had a deep connection with the tide age. In particular, during increasing tide, total catch were reduced gradually from the neap tide to the high tide. As it turned out, the slope of total catch declined by degree and showed a correlation coefficient of determination of 0.76. On the contrary, in the case of decreasing tide, there was little sign of rise in total catch. In particular, large catch seemed to occur at the next tide to the neap tide. In the relation between the catch and the tide age, the level of the correlation coefficient chosen at $p{\leq}0.05$ decreased in the order rabbitfish(-0.84) and horse mackerel(-0.71), while the significance of other dominant species were not selected.

• 수산해양기술연구
• /
• 제32권1호
• /
• pp.33-41
• /
• 1996

In order to obtain the most favourable classification system for fishing gears, the problems in the existing systems were investigated and a new system in which the fishing method was adopted as the criterion of classification and the kinds of fishing gears were obtained by exchanging the word method into gear in the fishing methods classified newly for eliminating the problems was established. The new system to which the actual gears are arranged is as follows ; (1)Harvesting gear \circled1Plucking gears : Clamp, Tong, Wrench, etc. \circled2Sweeping gears : Push net, Coral sweep net, etc. \circled3Dredging gears : Hand dredge net, Boat dredge net, etc. (2)Sticking gears \circled1Shot sticking gears : Spear, Sharp plummet, Harpoon, etc. \circled2Pulled sticking gears : Gaff, Comb, Rake, Hook harrow, Jerking hook, etc. \circled3Left sticking gears : Rip - hook set line. (3)Angling gears \circled1Jerky angling gears (a)Single - jerky angling gears : Hand line, Pole line, etc. (b)Multiple - jerky angling gears : squid hook. \circled2Idly angling gears (a)Set angling gears : Set long line. (b)Drifted angling gears : Drift long line, Drift vertical line, etc. \circled3Dragged angling gears : Troll line. (4)Shelter gears : Eel tube, Webfoot - octopus pot, Octopus pot, etc. (5)Attracting gears : Fishing basket. (6)Cutoff gears : Wall, Screen net, Window net, etc. (7)Guiding gears \circled1Horizontally guiding gears : Triangular set net, Elliptic set net, Rectangular set net, Fish weir, etc. \circled2Vertically guiding gears : Pound net. \circled3Deeply guiding gears : Funnel net. (8)Receiving gears \circled1Jumping - fish receiving gears : Fish - receiving scoop net, Fish - receiving raft, etc. \circled2Drifting - fish receiving gears (a)Set drifting - fish receiving gears : Bamboo screen, Pillar stow net, Long stow net, etc. (b)Movable drifting - fish receiving gears : Stow net. (9)Bagging gears \circled1Drag - bagging gears (a)Bottom - drag bagging gears : Bottom otter trawl, Bottom beam trawl, Bottom pair trawl, etc. (b)Midwater - drag gagging gears : Midwater otter trawl, Midwater pair trawl, etc. (c)Surface - drag gagging gears : Anchovy drag net. \circled2Seine - bagging gears (a)Beach - seine bagging gears : Skimming scoop net, Beach seine, etc. (b)Boat - seine bagging gears : Boat seine, Danish seine, etc. \circled3Drive - bagging gears : Drive - in dustpan net, Inner drive - in net, etc. (10)Surrounding gears \circled1Incomplete surrounding gears : Lampara net, Ring net, etc. \circled2Complete surrounding gears : Purse seine, Round haul net, etc. (11)Covering gears \circled1Drop - type covering gears : Wooden cover, Lantern net, etc. \circled2Spread - type covering gears : Cast net. (12)Lifting gears \circled1Wait - lifting gears : Scoop net, Scrape net, etc. \circled2Gatherable lifting gears : Saury lift net, Anchovy lift net, etc. (13)Adherent gears \circled1Gilling gears (a)Set gilling gears : Bottom gill net, Floating gill net. (b)Drifted gilling gears : Drift gill net. (c)Encircled gilling gears : Encircled gill net. (d)Seine - gilling gears : Seining gill net. (e)Dragged gilling gears : Dragged gill net. \circled2Tangling gears (a)Set tangling gears : Double trammel net, Triple trammel net, etc. (b)Encircled tangling gears : Encircled tangle net. (c)Dragged tangling gears : Dragged tangle net. \circled3Restrainting gears (a)Drifted restrainting gears : Pocket net(Gen - type net). (b)Dragged restrainting gears : Dragged pocket net. (14)Sucking gears : Fish pumps.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.2847-2858
• /
• 2021

When a nuclear reactor with rectangular fuel assemblies runs for a long time, impurities and debris may be taken into coolant channels, which may cause flow blockage, and the blocked fuel assemblies might be destroyed. Therefore, the purpose of this study is to perform a thermal-hydraulic analysis of a rectangular fuel assembly by STAR-CCM+, under the condition of one subchannel with 80% blockage ratio. A rectangular fuel assembly of the International Atomic Energy Agency (IAEA) 10 MW material test reactor (MTR) is chosen. In view of the gasket material taken into the coolant channel is close to the single side of the coolant channel, in the flow blockage accident of the Oak Ridge Research Reactor (ORRR), a new blockage category called single side blockage is attempted. The blockage positions include inlet, middle and outlet, and the blockage is set as a cuboid. It is found by simulations that the blockage redistributes the mass flow rate, and large vortices appear locally. The peak temperature of the cladding is maximum, when the blockage is located at the single side of the coolant channel inlet, and no boiling occurs in all blockage cases. Moreover, as the height of the blockage increases, the damage caused by the blockage increases slightly.

• Nuclear Engineering and Technology
• /
• 제46권2호
• /
• pp.195-206
• /
• 2014

Heat transfer characteristics in a narrow rectangular channel are experimentally investigated for upward and downward flows. The experimental data obtained are compared with existing data and predictions by many correlations. Based on the observations, there are differences from others: (1) there are no different heat transfer characteristics between upward and downward flows, (2) most of the existing correlations under-estimate heat transfer characteristics, and (3) existing correlations do not predict the high heat transfer in the entrance region for a wide range of Re. In addition, there are a few heat transfer correlations applicable to narrow rectangular channels. Therefore, a new set of correlations is proposed with and without consideration of the entrance region. Without consideration of the entrance region, heat transfer characteristics are expressed as a function of Re and Pr for turbulent flows, and as a function of Gz for laminar flows. The correlation proposed for turbulent and laminar flows has errors of ${\pm}18.25$ and ${\pm}13.62%$, respectively. With consideration of the entrance region, the heat transfer characteristics are expressed as a function of Re, Pr, and $z^*$ for both laminar and turbulent flows. The correlation for turbulent and laminar flows has errors of ${\pm}19.5$ and ${\pm}22.0%$, respectively.

• 수산해양기술연구
• /
• 제37권3호
• /
• pp.214-222
• /
• 2001

연안어장의 해저지형을 조사하기 위한 정밀음향측심시스템은 Public-DGPS 수신기. 싱글빔 음향측심기 및 측량용 소프트웨어로 구성하였으며, 그 유용성을 확인하기 위하여 정치망어장의 해저지형 특성 및 투입된 인공어초의 분포를 조사하였고 그 결과는 다음과 같다. 1. 본 연구에서 사용한 public-DGPS 수신기의 위치측정오차는 DGPS 모드일 때와 GPS 모드일 때 각각 5.47 m, 7.03 m이었다. 2. 실험정치망어장의 수심은 9~10 m이었고 해저는 대체로 평탄하였으며 이 어장으로부터 남쪽으로 120 m 떨어진 곳에 깊이 1~2 m, 폭 10 m내외의 골이 존재하였다. 3. 자란만 부근의 인공어초 수역에는 20개의 사각형 어초 (L3$\times$W3$\times$H3 m)가 수심 15~25 m에 낱개로 투입되어 있었고, 이 인공어초군의 가까이에 높이 5~8 m의 자연초가 있음을 확인할 수 있었다. 4. 본 연구에서 구현한 정밀음향측심시스템은 인공어초사업의 적지선정을 위한 사전조사에 활용할 수 있음을 확인할 수 있었다.

• Journal of Welding and Joining
• /
• 제23권2호
• /
• pp.81-89
• /
• 2005

A numerical model for multiple reflection effects of a polarized beam on laser grooving has been developed. The surface of the treated material is assumed to reflect laser irradiation in a fully specular fashion. Combining electromagnetic wave theory with Fresnel's relation, the reflective behavior of a groove surface can be obtained as well as the change of the polarization status in the reflected wave field. The material surface is divided into a number of rectangular patches using a bicubic surface representation method. The net radiative flux far these patch elements is obtained by standard ray tracing methods. The changing state of polarization of the electric field after reflection was included in the ray tracing method. The resulting radiative flux is combined with a set of three-dimensional conduction equations governing conduction losses into the medium, and the resulting groove shape and depth are found through iterative procedures. It is observed that reflections of a polarized beam play an important role not only in increasing the material removal rate but also in forming different final groove shapes. Comparison with available experimental results for silicon nitride shows good agreement for the qualitative trends of the dependence of groove shapes on the electric field vector orientation.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.399-413
• /
• 2021

The solution of the time-dependent neutron diffusion equation can be approximated using quasi-static methods that factorise the neutronic flux as the product of a time dependent function times a shape function that depends both on space and time. A generalization of this technique is the updated modal method. This strategy assumes that the neutron flux can be decomposed into a sum of amplitudes multiplied by some shape functions. These functions, known as modes, come from the solution of the eigenvalue problems associated with the static neutron diffusion equation that are being updated along the transient. In previous works, the time step used to update the modes is set to a fixed value and this implies the need of using small time-steps to obtain accurate results and, consequently, a high computational cost. In this work, we propose the use of an adaptive control time-step that reduces automatically the time-step when the algorithm detects large errors and increases this value when it is not necessary to use small steps. Several strategies to compute the modes updating time step are proposed and their performance is tested for different transients in benchmark reactors with rectangular and hexagonal geometry.

• Nuclear Engineering and Technology
• /
• 제43권3호
• /
• pp.271-278
• /
• 2011

When performing fire PSA in a nuclear power plant, an event mapping method, using an internal event PSA model, is widely used to reduce the resources used by fire PSA model development. Feasible initiating events and component failure events due to fire are identified to transform the fault tree (FT) for an internal event PSA into one for a fire PSA using the event mapping method. A surrogate event or damage term method is used to condition the FT of the internal PSA. The surrogate event or the damage term plays the role of flagging whether the system/component in a fire compartment is damaged or not, depending on the fire being initiated from a specified compartment. These methods usually require explicit states of all compartments to be modeled in a fire area. Fire event scenarios, when using explicit identification, such as surrogate or damage terms, have two problems: (1) there is no consideration of multiple fire propagation beyond a single propagation to an adjacent compartment, and (2) there is no consideration of simultaneous fire propagations in which an initiating fire event is propagated to multiple paths simultaneously. The present paper suggests a fire propagation equation to identify all possible fire event scenarios for an explicitly treated fire event scenario in the fire PSA. Also, a method for separating fire events was developed to make all fire events a set of mutually exclusive events, which can facilitate arithmetic summation in fire risk quantification. A simple example is given to confirm the applicability of the present method for a $2{\times}3$ rectangular fire area. Also, a feasible asymptotic approach is discussed to reduce the computational burden for fire risk quantification.