• The Journal of the Acoustical Society of Korea
• /
• v.35 no.5
• /
• pp.358-367
• /
• 2016

SSL (Sound Source Localization) has been applied to several applications such as man-machine interface, video conference system, smart car and so on. But in the process of sound source localization, angle estimation error is occurred mainly due to the non-linear characteristics of the sine inverse function. So an approach was proposed to decrease the effect of this non-linear characteristics, which divides the microphone's covering space into narrow regions. In this paper, we proposed an optimal space dividing way according to the pattern of microphone array. In addition, sound source's 2-dimensional position is estimated in order to evaluate the performance of this dividing method. In the experiment, GCC-PHAT (Generalized Cross Correlation PHAse Transform) method that is known to be robust with noisy environments is adopted and triangular pattern of 3 microphones and rectangular pattern of 4 microphones are tested with 100 speech data respectively. The experimental results show that triangular pattern can't estimate the correct position due to the lower space area resolution, but performance of rectangular pattern is dramatically improved with correct estimation rate of 67 %.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.95-101
• /
• 1990

Parallel optical arithmetic techniques have been developed using the correlation property of optical phase conjugate wave generated by degenerated four wave-mixing. In this paper, conventional rectangular-type coded pattern used for optical logic system is replaced by circular one for effective beam coupling in a photorefractive $BaTiO_3$ material. By adequately adjusting the distance between circular-type pixels of the input pattern and grouping the correlated output, optical binary half addition/subtraction, binary multiplication and, matrix-matrix computation are demonstrated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.85-90
• /
• 1996

In the word, there is varied types of vibration, and these affect the mechanical industry. In this paper is plates with two parallel sides fixed. Electronic speckle pattern interferometry (ESPI) is one of the optical nondestructive testing technique. By using the ESPI, vibration modes for excitation point, a/b(ratio of longuitudinal and lateral length), and kind of specimen are measured and compared qualitatively with theoritical analysis that Warburton proposed.

• The KSFM Journal of Fluid Machinery
• /
• v.8 no.4 s.31
• /
• pp.39-47
• /
• 2005

The present study has been performed to investigate the influences of rectangular fins on heat transfer in an impingement/effusion cooling system with crossflow. To simulate the impingement/effusion cooling system with initial crossflow, two perforated plates are placed in parallel and staggered arrangements with a gap distance of 2 times of the hole diameter. The crossflow passes between the plates, and various rectangular fins are installed on the plates. Reynolds number based on the hole diameter is fixed to 10,000 and the flow rate of crossflow is changed from 0.5 to 1.5 times of that of the impinging jet. A naphthalene sublimation method is used to obtain the heat/mass transfer coefficients on the effusion plate. Also to analyze the flow characteristics, a numerical calculation is performed. When rectangular fins are installed, the flow and heat transfer pattern is changed greatly from the case without fins. In the injection hole region, the jet impinges on effusion plate without deflection and wall jet spreads symmetrically. In the effusion region, the crossflow accelerates due to the decrease of cross-sectional area in the channel. Local heat/mass transfer coefficients are enhanced significantly compared to the case without fins. As the blowing ratio increases, the effect of rectangular fins against the crossflow becomes more significant and then the higher average heat/mass transfer coefficients are obtained than the case without fins. However, the increase of blockage effect gives more pressure loss in the channel.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.3
• /
• pp.218-223
• /
• 2009

The micro pattern machining on the surface of wide mold is not easy to be simulated by conventional software. In this paper, a software is developed for micro pattern cutting simulation. The 3d geometry of v-groove, rectangular groove, pyramid and pillar patterns are visualized by C++ and OpenGL library. The micro cutting force is also simulated for each pattern.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.573-574
• /
• 2012

• 한국초전도학회:학술대회논문집
• /
• v.14
• /
• pp.33-33
• /
• 2004

• Applied Microscopy
• /
• v.28 no.3
• /
• pp.415-424
• /
• 1998

The dependency of long-range order parameter on the ordered structure of $Pb(Mg_{1/3}Nb_{2/3})O_3$ solid solutions has been investigated by means of computer simulations of high-resolution lattice images. The computer image simulations were performed by the multislice method in a wide range of sample thicknesses, defocusing values, and long-range order parameters. It was found that the lattice images of the ordered structures were predominantly dependent on the long-range order parameter, The lattice images in a complete ordered structure showed a pseudo-hexagonal pattern. As the order parameter decreases, the simulated images changed slowly from a pseudo-hexagonal pattern to a rectangular pattern. The lattice images in a complete disordered structure showed a rectangular pattern. Also, the simulated images of the $Pb(Mg_xNb_{1-x})O_3$ with different Mg:Nb ratios obtained at a given long-range order parameter were basically the same patterns, irrespective of Mg and Nb compositions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.377-383
• /
• 1996

Recently, a new technique called Electronic Speckle Pattern Inteferometry(ESPI) has been developed to overcome the drawbacks of existing holography. This technique enable real-time interference fringes to be displayed directly on TV monitor without recourse to any form of photographic processing. This research was carried out for the purpose of applying the vibration analysis method employing Electronic Speckle Pattern Interference technique to the vibration analysis of uniform rectangular cantilever plate, The natural vibration frequencies found by ESPI were in fair agreement with theoretical eigen frequencies acquired using theoretical formula G. B. Warburton proposed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.61-67
• /
• 1997

The electronic speckle pattern interferometer (ESPI) has been applied to many technical problems such as deformation and displacement measurement, strain visualization and surface roughness monitoring. In this study, we used an ESPI system based on the dual beam speckle interferometer method in order to measure in-plane displacement and vibration mode using the ESIP technique. This research was carried out for the purpose of applying the vibration analysis method employing Electro-Optic holographic interference technique to the vibration analysis of uniform rectangular cantilevers plate(SS400,STS304) with cantilevers span to breadth ratio of 150 by 75. And thickness of 1mm and 0.8mm respectively. We improved the ESPI technique in order to obtain the distribution of displacement component resolved in one direction through a CCD camera combined with an image processing system. To certify and to assess the accuracy in measuring by this ESPI, the results obtained with the speckle method and vibration mode analysis are to be compared with those results by Warbuton's Theoretical expression and vibration made in FEM analysis.