• 제목/요약/키워드: rectangular pattern

검색결과 346건 처리시간 0.031초

2.45 GHz에서 무선 통신 시스템을 위한 인셋 페드 마이크로스트립 패치 안테나 (Inset Fed Microstrip Patch Antenna for Wireless Communication at 2.45 GHz)

  • 사지나 프라다한;최동유
    • 한국정보통신학회논문지
    • /
    • 제18권8호
    • /
    • pp.1785-1790
    • /
    • 2014
  • 통신 시스템에서 다양한 종류의 마이크로스트립 안테나는 많은 어플리케이션에서 사용되고 있다. 본 논문에서는 무선통신을 위한 2.45 GHz의 인셋 페드 직사각형 마이크로스트립 패치 안테나를 HFSS를 활용하여 설계하였다. 안테나는 유전율 2.2, 두께 1.6 mm의 Telfron 기판을 사용하였으며 기판의 한쪽 면은 접지면을 갖는다. 시뮬레이션을 통하여 반사손실, VSWR, 이득, 방사패턴 등의 안테나 특성을 확인하였다.

사각형 종이의 접고 펼친 흔적과 (0,1)-패턴의 관계성 (Relation between folding and unfolding paper of rectangle and (0,1)-pattern)

  • 이성계;김진수;최원
    • 한국수학교육학회지시리즈E:수학교육논문집
    • /
    • 제23권3호
    • /
    • pp.507-522
    • /
    • 2009
  • 일반적으로 종이접기를 하고 그 종이를 다시 펼치면 흔적이 남는다. 직사각형의 종이를 이용하여 얻을 수 있는 수학적 사실과 프로그램을 접목해 보았다. 사각형의 종이를 접는 방향에 따라 골과 등성이의 형태가 다양하게 나타나며 이런 종이 모양의 흔적을 (0,1)코드와 (0,1)행렬을 이용하여 4종류로 분류하고 연구하였다. 따라서 이런 사각형 종이접기의 흔적을 보고 거꾸로 어떻게 접는지를 귀납적 추론력을 통해 코드와 종이접기의 흔적의 관계를 탐구하였다. 마지막으로 이 내용을 수학프로그램을 계발하였고 현장에서 실습을 할 수 있다.

  • PDF

$180^{\circ}$ 곡관부를 가지는 회전 덕트에서의 열/물질전달 특성 (Heat/Mass Transfer Characteristics in A Rotating Duct with $180^{\circ}$ Turn)

  • 원정호;이세영;조형희
    • 대한기계학회논문집B
    • /
    • 제25권3호
    • /
    • pp.405-413
    • /
    • 2001
  • The present study investigates convective heat/mass transfer and flow characteristics inside a rotating two-pass rectangular duct. A naphthalene sublimation technique is employed to determine the detailed local heat transfer coefficients using the heat and mass transfer analogy. The objective of this study is to determine the effects of turning geometry with rotation for 0.0$\leq$Ro$\leq$0.24. The results reveal that the sharp-turn corner has the larger pressure drop and lower heat transfer in the post-turn region than those of the round-turn corner. The strong secondary flow enhances heat transfer for the round-turn corner. Coriolis force induced by the rotation pushes the high momentum core flow toward the trailing wall in the first passage with radially outward flow and toward the leading wall in the second passage with radially inward flow. Consequently, the high heat transfer rates are generated on the trailing surface and the leading surface in the first and second passage, respectively. However, the strong secondary flow due to the turning dominates the flow pattern in the second passage, thus the heat transfer differences between the leading and trailing surfaces are small with the rotation.

원통형 복합재료 안테나의 설계 및 충격 실험에 관한 연구 (Design and Impact Testing of Cylindrical Composite Antenna Structures)

  • 이상민;조상현;이창우;황운봉
    • Composites Research
    • /
    • 제22권3호
    • /
    • pp.55-59
    • /
    • 2009
  • 마이크로스트림 안테나는 가볍고 부피가 작을 뿐만 아니라 집적화가 가능하고, 표면 부착력이 탁월하여 많은 통신 시스템 안테나로 응용되고 있다. 안테나의 구조는 12.5GHz의 중심주파수를 갖는 사각 패치 마이크로 스트립 안테나로 설계하였고 곡률 방향으로 패치를 확장시켜 총 4개의 패치를 배열시켰다. 양쪽의 복합재료 사이에 허니컴을 삽입한 샌드위치 구조물이 되도록 설계한 다음 충격 실험을 실시하였다. 충격실험 후 안테나 성능변화를 측정한 결과 영향을 받지 않는다는 것을 확인하였다.

Comparison between the Egyptian and international codes based on seismic response of mid- to high-rise moment resisting framed buildings

  • Ahmed Ibrahim;Ibrahim El-Araby;Ahmed I. Saleh;Mohammed Shaaban
    • Structural Engineering and Mechanics
    • /
    • 제87권4호
    • /
    • pp.347-361
    • /
    • 2023
  • This research aims to assess the behavior of reinforced concrete (RC) residential buildings when moment-resisting frames (MRFs) are used as the lateral resisting system. This investigation was conducted using MIDAS Gen v.19.0. Buildings with various plan footprints (Square, Rectangular, Circular, Triangular, and Plus-Shaped), and different heights (15 m, 30 m, 45 m, and 60 m) are investigated. The defined load cases, the equivalent static lateral load pattern, and the response spectrum function were defined as stated by the American Standard (ASCE 7-16), the 1997 Uniform Building Code (UBC97), the Egyptian Code for Loads (ECP-201), and the European Standard (EC8). Extensive comparisons of the results obtained by the different codes (including the story displacement, the story drift, and the base shear) were undertaken; to assess the response of moment-resisting multi-story framed buildings under lateral loads. The results revealed that, for all study cases under consideration, both ECP-201 and EC8 gave smaller base shear, displacement, and drift by one third to one fourth, around one fourth, around one fifth, respectively for both the ELF and RSA methods if compared to ASCE 7-16 and UBC97.

Dualband Shared-Aperture Microstrip Antenna for Reflectarray Feeding Structure of LEO Satellite System

  • Bagas Satriyotomo;Ji-Woong Hyun;Seongmin Pyo
    • 전기전자학회논문지
    • /
    • 제28권1호
    • /
    • pp.20-25
    • /
    • 2024
  • This paper presents a new dualband shared-aperture microstrip antenna to operate in the S-Band of 2 GHz and X-Band of 8 GHz, for a Low Earth Orbit satellite antenna system. The proposed antenna incorporates two types of patches those are a rectangular loop-shaped for the S-Band and a square patch for the X-Band. Each patch are optimized for its respective operating band with minimal interference. The proposed antenna achieves a bandwidth of 16 MHz in the S-Band and 572 MHz in the X-Band. The highest gain is measured 7.14 dBi at 1.99 GHz and 7.95 dBi at 7.88 GHz. The proposed antenna exhibits half power beamwidths of 85 degree and 80 degree at 1.99 GHz and 7.88 GHz, respectively. The proposed dualband shared-aperture microstrip antenna may be a good candidate for as a feeding system of a dualband reflectarray antenna With its unidirectional radiation pattern from excellent agreement between simulation and measurement results.

20대 여성 체형별 크롭 티셔츠의 가상착의 효과 분석 -기하 형태 효과의 활용- (Analysis of Virtual Fitting Effects of Cropped T-Shirts by Body Type for Women in Their 20s -Utilizing the Effects of Geometric Shapes-)

  • 한금화;노주현
    • 한국의류학회지
    • /
    • 제48권3호
    • /
    • pp.467-484
    • /
    • 2024
  • This study aimed to enhance the design of cropped t-shirts to improve fit satisfaction among women in their 20s by tailoring the t-shirts to diverse body types. Body types were categorized using Size Korea's 8th Human Body Measurement Data, and statistical analysis was conducted based on the Statistical Package for the Social Sciences (version 26.0). This study also reviewed the literature on t-shirts and fit, the application of pattern and design improvements for different body types, verifying fit and size for each body type, and applying virtual fit effects using geometric forms. Frequency analysis and non-parametric verification were conducted using the Friedman test. The results showed that t-shirts with a horizontal rectangular shape was an effective design and that t-shirts with an inverted triangular structure also had a positive effect. In contrast, square t-shirts exhibited minimal effectiveness. These findings are expected to contribute to the consideration of customized shapes according to body type in t-shirt design. Research on customized virtual cropped t-shirts reflecting various body types can expand fit satisfaction studies, particularly amid the increasing trend of online shopping.

기생소자를 가지는 U-형태의 광대역 RFID 태그 안테나 (U-Shaped Broadband RFID Tag Antenna with a Parasitic Element)

  • 이상운;조치현;이기근;추호성;박익모
    • 한국전자파학회논문지
    • /
    • 제20권1호
    • /
    • pp.75-82
    • /
    • 2009
  • 본 논문에서는 UHF 대역에서 동작하는 기생소자를 가지는 U-형태의 광대역 RFID 태그 안테나를 제안하였다. 제안한 태그 안테나는 복사부에 해당하는 U-형태의 반파장 다이폴 안테나 상단 중앙에 역방향으로 U-형태의 기생소자를 삽입하였고, 본체 하단 중앙에 사각 형태의 급전 구조를 삽입하여 상용 태그 칩과 안테나의 공액 정합을 용이하게 하였다. 제안된 태그 안테나는 VSWR<2를 기준으로 한 $882{\sim}927\;MHz$의 대역폭 안에서 3.16 dB 이하의 이득편차 특성을 가졌고, VSWR<5.8을 기준으로 한 대역폭은 $857{\sim}958.5\;MHz$로 전세계 UHF 대역폭을 모두 수용하였으며, 대역폭 내에서 5.07 dB 이하의 이득편차 특성을 가졌다. 또한 최소 이득편차 특성이 대역폭 중심 주파수에 나오도록 하여 주파수에 따른 이득편차 특성 변화를 최소화하였다.

Rhodocyclus gelatinosus KUP-74의 고정화균체로부터 ${\delta}-Aminolevulinate$의 연속생산 (Continuous Production of ${\delta}-Aminolevulinate$ from Immobilized Cells of Rhodocyclus gelatinosus KUP-74)

  • 이소희;김현호;윤순규;임왕진;황세영
    • Applied Biological Chemistry
    • /
    • 제38권1호
    • /
    • pp.1-6
    • /
    • 1995
  • Rhodocyclus gelatinosus KUP-74의 고농도 휴지균체로부터 ${\delta}-aminolevulinate$(ALA)를 연속적으로 생산하기 위한 최적조건을 검토하였다. 균체외 ALA양은 20 mg cells/ml의 균체농도까지는 농도 증가에 따른 rectangular hyperbola의 증가양식을 보였으나, 그 이상의 균체농도는 ALA 생산에 전혀 증가효과를 보이지 않았다. 20 mg cells/ml의 반응계에서, 균체외 ALA의 효과적 생산을 위한 첨가물질의 최저농도는 levulinate 4 mM과 L-glutamate 5 mM로 나타났으며, 배양 3시간후 ALA 양의 최대치를 보였다. 한편, Ca-alginate를 이용한 포괄법으로 고정화시킨 균체로부터 효과적으로 ALA를 생산하기 위한 첨가물질의 최적농도는 levulinate 6 mM과 L-glutamate 10 mM로 나타났으며, 배양 6시간째에 균체외 ALA 양의 최대치를 보였다. 또한, 이 조건 하에서 고정화균체와 고농도의 휴지균체에 의한 ALA의 연속생산성을 검토한 결과, 이들 균체에 의한 50% ALA 생산성은 각각 185시간과 100시간에서 나타났으며, 생산된 균체외 ALA의 회수를 위해서는 균체를 고정화시키는 방법이 효과적이었다.

  • PDF

등방성 복사 특성을 가지는 U-형태의 RFID 태그 안테나 (U-Shaped RFID Tag Antenna with Isotropic Radiation Characteristic)

  • 이상운;조치현;이기근;추호성;박익모
    • 한국전자파학회논문지
    • /
    • 제19권5호
    • /
    • pp.523-532
    • /
    • 2008
  • 본 논문에서는 RFID 시스템의 안정적인 구동을 위하여 등방성 복사 특성을 가지는 U-형태의 RFID 태그 안테나를 제안하였다. 태그 안테나는 복사부에 해당하는 U-형태의 반파장 다이폴 본체와 사각 형태의 급전부가 결합된 구조이다. 태그 칩과의 공액 정합이 용이하게 하기 위해 급전부 하단 중앙에 상용 태그 칩을 부착하여 U-형태의 본체에 연결하였다. 또한, U-형태의 태그 안테나의 본체 하단 중앙을 직사각형 슬릿을 만들어 이득 편차 특성을 개선하였다. 두 구조의 태그 안테나는 VSWR<2를 기준으로 국내에 할당된 UHF 주파수 대역인 $908.5{\sim}914$ MHz를 수용하였으며, VSWR<2 대역폭 안에서 슬릿이 없는 경우 1.63 dB 이하의 이득 편차 특성을, 슬릿이 있는 경우에는 0.74 dB 이하의 이득 편차 특성을 가졌다. 또한, VSWR<5.8 대역폭 안에서 슬릿이 없는 경우 3.8 dB 이하의 이득 편차 특성을, 슬릿이 있는 경우에는 1.2 dB 이하의 이득 편차 특성을 가졌다.