• Journal of Biosystems Engineering
• /
• v.27 no.2
• /
• pp.125-132
• /
• 2002

In order to investigate the optimum moisture content of paddy for milling process, a series of tests were conducted by examining the recovery rate and whiteness of milled rice in relation with the various moisture content. Hwabong-byeo and Dongjin-byeo varieties which were major paddies cultivated in Korea were used for the experiment. The test was performed with small experimental milling machines. In order to minimize the unexpected factors, environment conditions were kept in constant during the experiment. As a result, the recovery rate of milled rice were varied as the changes in milling time and degree of whiteness. However, the recovery rate of milled rice increases as its moisture content increases untill a certain point of moisture content and decreases slowly afterward. This certain point can be called optimum moisture content for rice milling. Also, it has a different value depending on the variety. In this experiment, optimum moisture content of Hwabong-byeo and Dongjin-byeo were considered around 14.8% and 15.3%, respectively. It is not sure that these optimum moisture contents for the two varieties would assume the same values irrespective of harvest year and place. However, it could be concluded that the optimum moisture content for rice milling is around 15%(w.b.) for Hwabong-byeo and 15.5%(w.b.) for Dongjin-byeo, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.8
• /
• pp.629-635
• /
• 2008

Recently, microturbines have received attention as a small-scale distributed power generator. Since the exhaust gas carries all of the heat release, the microturbine CHP (combined heat and power) system is relatively compact and easy to maintain. Generating hot water or steam is usual method of heat recovery from the microturbine. In this work, a heat recovery unit producing hot water was installed at the exhaust side of a 30 kW class microturbine and its performance characteristics following microturbine power variation was investigated. Heat recovery performance has been compared for different operating conditions such as constant hot water temperature and constant water flow rate. In particular, the influence of water flow rate and hot water temperature on the recovered heat was analyzed.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.7
• /
• pp.1-5
• /
• 1998

In this paper, recovery method with high-bitrate and low-bitrate coder was implemented in order to recover consecutive packet loss over the Internet. LPC was used as redundant audio data for recover of lost packets and RTP parcket format was modified for accommodation of redundant data. In measuring results using random packet loss rate with three redundant datra in every packet, it has shown that recovery rate was 80% in los rate of 50%. Since the processing delay for recovery of the lost packet was 200ms, this recovery method can be applied to real-time Internet sevice such as Internet phone.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.4
• /
• pp.275-279
• /
• 2004

A new burst mode clock and data recovery circuit is realized that improves the previousldy-known gated-oscilletor technique with half rate clock recovery, The circuit was fabricated with 0.25um CMOS technology, and its functions were confirmed up to 1 Gbps.

• Biomedical Science Letters
• /
• v.19 no.1
• /
• pp.70-78
• /
• 2013

This study was conducted to identify the effects of intake of beta-blocker and aerobic exercise on heart rate recovery (HRR) and exercise capacity after maximal exercise in acute coronary syndrome patients (ACS). Subjects were divided into 4 groups; Beta-blocker-Exercise group (n=10), Beta-blocker group (n=10), Exercise group (n=10), Control group (n=10). Symptom-limited grade exercise test were conducted on subjects pre- and post- 6 week study, to measure maximal heart rate, heart rate at 1 minute and 2 minutes at the recovery stage, maximal oxygen uptake and maximal exercise time. Study resulted in significant improvements in heart rate recovery for BB-Ex group ($17.40{\pm}5.58$ bpm to $26.10{\pm}6.66$ bpm), maximal oxygen uptake for BB-Ex group ($30.46{\pm}8.63$ to $36.33{\pm}8.10$) and Ex group ($29.04{\pm}4.93$ to $34.31{\pm}5.19$), and total exercise time for BB-Ex group ($906.30{\pm}158.57$ to $1018.50{\pm}151.21$), BB group ($805.70{\pm}182.94$ to $897.50{\pm}160.16$) and Ex group ($870.00{\pm}145.63$ to $961.90{\pm}107.29$). Therefore it showed the biggest improvement for heart rate recovery and exercise capacity in acute coronary syndrome patients when both Beta-blocker and aerobic exercise were in effect.

• Journal of Distribution Science
• /
• v.3 no.1
• /
• pp.23-42
• /
• 2005

The service offer expectation and the desire of customers to a large-sized rate influence store also increase as a result of such environmental change. the counter where research of a book was upgraded from differentiation pursuit by competition between business condition in business condition in the case of the domestic rate influence store which has put the focus on service strengthening The work shrine which cannot reach here the competition predominance in the domestic market it will be hard coming to secure, when environmental change of inside large-sized rate influence store industry is taken into consideration The research which tried to receive customer service failure recovery carried out actual proof analysis in the influence to which fair nature lateness of a customer attains to the re-purchase intention to this store of customer satisfaction and future by service recovery process for an object in the customer who held service failure recovery experience in the domestic large-sized rate influence store.

• Economic and Environmental Geology
• /
• v.8 no.3
• /
• pp.165-168
• /
• 1975

The grade and recovery rate and its sulphur content of iron concentrate compared respectively as varied with redcued size using the Crocket Magnetic Separator and the Wet-Drum-Magnetic Separator in the magnetic separation test of iron ore from Yangyang mine. The content of sulphur was decreased distinctly as the size was finer. In case of the sample of -100 mesh, using the Crocket Magnetic Separator, the sulphur content of iron ore was decreased to 0.10% and its grade increased to 67.0%, but the recovery rate was no more than 85.1%. In the Wet-Drum type, the grade and the recovery rate of concentrate was better than those in the Crocket Magnetic Separation, but the content of sulphur was more than that in the Crocket Magnetic Separation. The Crocket type is suitable for less sulphur content while the Wet-Drum Magnetic Separator is suitable for better the grade recovery rate of the magnetic concentrate.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.71-79
• /
• 2008

To find out the effect of the vegetation recovery and the problems of forest land, the researches of the mortality in pine stand and vegetation recovery have been carried out from the burned site. In area which is damaged by fire scar on crown and stem, rate of dead is higher. Where stand growing stocks were totally damaged by crown forest fire, most of vegetation was recovered by sprouts and planted seeds. Vegetation recovery power were depending on the condition of soil depth condition. For the artificial recovery, the damage happened by insects in the planted birches plantation. Rate of growth was somewhat different between Pinus densiflora and Pinus thunbergii in the plantation, because of individual growth rate.

• Journal of ILASS-Korea
• /
• v.28 no.3
• /
• pp.126-133
• /
• 2023

This study analyzes the flow characteristics and sponge ball recovery performance in a ball strainer according to vortex promoter design variables through flow-particle analysis based on actual experiments to derive a method for improving the recovery rate of cleaning sponge balls of CTCS applied to existing power plants. Based on the ball strainer in CTCS used in the power plant, the experiment was conducted by changing the design factor of the improved shape. In addition, flow and particle analysis were performed under the same conditions as the experiment to numerically the flow characteristics and recovery rate in the ball strainer according to the design factor of the vortex promoter. As a result of the study, it was confirmed that the recovery performance was improved by about 3% by changing the design height of the Vortex promoter. And when comparing the difference between maximum and minimum recovery rate, it was found that the effect on the recovery performance increased slightly according to the distance condition compared to the vortex promoter design height condition.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.7 no.3
• /
• pp.1-11
• /
• 2024

Purpose: The purpose of this study is to present an efficient emission reduction ratio of plastic to reduce carbon dioxide, the main cause of greenhouse gases. Research design, data and methodology: This study calculated the absolute value of carbon dioxide by setting an equation through the emission coefficient using the US EPA's WARM model. Results: In the recycling ratio of 70%, it was found that the energy recovery ratio was 15.6%, which was the energy recovery ratio without generating carbon dioxide. When carbon dioxide is generated by changing plastic waste emissions, optimal efficiency is achieved by reducing emissions by 10% to 30% of energy recovery ratio, 20% to 50% of energy recovery ratio, and 30% to 80% or more of energy recovery ratio. Conclusions: The recycling rate should be set at a minimum of 70%, so that a carbon dioxide-free energy recovery rate could be obtained during the recycling process, supporting an eco-friendly basis for environmental policies aimed at this rate. In addition, it was possible to suggest that it is essential to reduce emissions by at least 30% for eco-friendly recycling measures that can achieve both economic and environmental feasibility in the energy recovery process through incineration during recycling in Korea.